Answer:
1 cg = 10 mg
Explanation:
So, 89cg = 89 * 10 = 890mg!
Pls thank, 5star, and brainliest!
What type of cell in the human body grows but does not undergo mitosis?
Answer:Skeletal muscle can undergo hypertrophy, as each cell gets bigger.
Explanation:
Answer:
Sperm cells and egg cells don't go through mitosis.
Explanation:
If 23.17 g of beryllium (Be) reacts with water at standard temperature and pressure,
how many liters of hydrogen (H2) are produced?
Volume of H2 produced = 57.6576 L
Further explanationGiven
23.17 g Be
Required
Volume of H2
Solution
Reaction
Be(s)+H2O(g)→BeO(s)+H2(g)
mol Be :
= 23.17 g : 9 g/mol
= 2.574
From the equation, mol H2 : mol Be = 1 : 1, so mol H2 = 2.574
Volume H2(assumed at STP, 1 mol=22.4 L) :
= 2.574 x 22.4 L
= 57.6576 L
When sodium (Na1+) and oxygen (O2-) combine, the resulting formula will be what
Answer:Na2O
Explanation:
When sodium and oxygen combine, the resulting chemical formula will be Na₂O.
What is chemical formula?Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
There are four types of chemical formula:
1)empirical formula
2) structural formula
3)condensed formula
4)molecular formula
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ6
How many grams of water are produced when oxygen reacts with an excessive amount of propane (C3H8)?
Answer:
From the equation you will see that 1 mol of propane generates 4 mols of water.
Since the molar mass of water
M ( H2O)=2×1+16=18g/mol
2 mol propane will generate
2 ×4×18=144g of water
Explanation:
Since the molar mass of water
M ( H2O)=2×1+16=18g/mol
2 mol propane will generate
2 ×4×18=144g of water
If the spring constant is 30N/m and a spring is stretched by 0.3m, how much force has been applied?
Answer:
Question:
A spring with a spring constant of 30 N/m is stretched 0.2 m from its equilibrium position. How much work must be done to stretch it an additional 0.1 m?
Elastic Potential Energy:
The work that needs to be done by any object is a form of energy. The work can be defined in terms of the work-energy theorem, which states that the work can either be the difference in the kinetic energy of a system or the difference in the potential energy of a system. There is a special type of potential energy reserved exclusively for
Graphite has a specific heat of 0.709 J/gºC. If a 25 gram piece of graphite is cooled
by 17°C, how much energy was lost by the graphite?
Answer:
[tex]\boxed {\boxed {\sf 301.325 \ Joules }}[/tex]
Explanation:
Since we are given the mass, specific heat, and change in temperature, we should use this formula for energy:
[tex]q=mc \Delta T[/tex]
The mass of the graphite is 25 grams. Graphite's specific heat is 0.709 J/g °C. The change in temperature is 17 degrees Celsius.
[tex]m= 25 \ g \\c= 0.709 \ J/g \ \textdegree C \\\Delta T= 17 \ \textdegree C[/tex]
Substitute the values into the formula.
[tex]q= (25 \ g)( 0.709 \ J/g \ \textdegree C )( 17 \ \textdegree C)[/tex]
Multiply the first two numbers. The grams will cancel.
[tex]q= 17.725 \ J/ \textdegree C(17 \ \textdegree C)[/tex]
Multiply again. This time the degrees Celsius cancel.
[tex]q= 301.325 \ J[/tex]
The graphite loses 301.325 Joules of energy.
Find the mass of 5.60 L O2 at 1.75 atm and 250.0 K
Answer:
Moles O2 = pV/RT = 2.75 x 5.60 / 0.08206 x 250=0.751
mass = 32 g/mol x 0.751 mol= 24.0 g
Explanation:
Hope it help
Mark me as brainliest
The mass of 5.60 Liter oxygen at 1.75 atm pressure and 250.0 K temperature is 24.0 gram.
What is ideal gas equation?
Ideal gas equation is a hypothesis which tells about the behavior of gas at standard condition and it is represented as:
PV = nRT, where
P = pressure = 1.75 atm
V = volume = 5.60 L
R = universal gas constant = 0.0821 L.atm /K.mol
T = temperature = 250 K
n is the moles of gas which will further define as:
n = W/M, where
W = required mass
M = molar mass
Now putting all the value in the above ideal gas equation and calculate for moles as:
n = (1.75)(5.60) / (0.0821)(250)
n = 0.751
Molar mass of oxygen is 32 g/mol and we calculate their required mass as:
W = 32 g/mol x 0.751 mol= 24.0 g
Hence, the required mass of oxygen is 24.0 g.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/25290815
pls help 6th grade science
Why are liquids often dense?
The pressure and temperature of N² and gas drops from 303kPa at 300K to 202²kPa at -73°C. If the initial volume is 2L, find the new volume.
Answer:
Gjvb
Explanation:
Using the combined gas law equation as follows:
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (kPa)
P2 = final pressure (kPa)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to this question;
T1 = 300K
T2 = -73 + 273 = 200K
P1 = 303kPa
P2 = 202kPa
V1 = 2L
V2 = ?
Using the above formula:
303 × 2/300 = 202 × V2/200
606/300 = 202V2/200
Cross multiply;
606 × 200 = 300 × 202V2
121200 = 60600V2
V2 = 121200/60600
V2 = 2L
The new volume is 2L
Please help me :D I’m begging rn lol
Answer:
To catch a ball, the fielder has to stop the ball. This means, force is applied against the motion of the ball. So, between the fielder applies force on the ball and the ball comes to rest, the ball moves in the direction opposite to the direction of force. Thus work is negative.
Explanation:
MARK ME AS BRAINLIEST PLSSS
3.50 moles of Ca = ? grams Ca
Answer:
The mass of 3.5 moles of Ca is 140 g to two significant figures.
Explanation:
What does the difference in force depend on?
PLEASE HELP WILL MARK BRAINLEST!
Which of these elements does not take an electron from an s orbital?
Convert 12.04 x 1023 atoms of helium to moles
Moles of Helium = 2
Further explanationGiven
12.04 x 10²³ atoms of helium
Required
moles
Solution
The mole is the number of particles(molecules, atoms, ions) contained in a substance
1 mol = 6.02.10²³ particles
Can be formulated
N=n x No
N = number of particles
n = mol
No = Avogadro's = 6.02.10²³
moles Helium :
n = N : No
n = 12.04 x 10²³ : 6.02 x 10²³
n = 2
Plz help me on this
A student has a 6 gram sample of sodium chloride (NaCl) solid. How many moles of sodium chloride are contained in this sample?
The number of moles of NaCl = 0.103
Further explanationGiven
6 gram sample of NaCl
Required
moles
Solution
The mole is the number of particles contained in a substance
1 mol = 6.02.10²³
Moles can also be determined from the amount of substance mass and its molar mass
mole = mass : molar mass
Molar mass of NaCl = 58.5 g/mol
Input the value :
mole = 6 g : 58.5 g/mol
mole = 0.103
The student collects the H2 (g) produced by the reaction and measures the volume
The question is incomplete, the complete question is;
The student collects the H2(g) produced by the reaction and measures its volume over water at 298 K after carefully equalizing the water levels inside and outside the gas-collection tube, as shown in the diagram below. The volume is measured to be 45.6mL . The atmospheric pressure in the lab is measured as 765 torr , and the equilibrium vapor pressure of water at 298 K is 24 torr .(i) The pressure inside the tube due to the H2(g)
Answer:
741 torr
Explanation:
From the question we can see that the atmospheric pressure in the lab is 765 torr.
The vapour pressure of water = 24 torr
From Dalton's law of partial pressure, we know that;
Total pressure = Pressure of the H2 + Partial pressure of water vapour
Therefore;
Pressure of H2 = Total pressure - Partial pressure of water vapour
Pressure of H2 = 765 torr - 24 torr = 741 torr
Calculate the vapor pressure (in torr) of a 35°C solution of ethanol and propanol where the mole fraction of propanol is .75. Assume Ideal behavior P°ethanol35=100torr P°propanol35=36torr
The vapor pressure (in torr) of a 35°C solution : 52 torr
Further explanationGiven
x propanol = 0.75
P°ethanol=100 torr
P°propanol=36 torr
Required
the vapor pressure
Solution
Raoult's Law
P solution = xA.P°A +xB.P°B
x ethanol = 1- 0.75 = 0.25
Input the value :
P solution = 0.25 x 100 + 0.75 x 36
P solution = 25 + 27
P solution = 52 torr
find the valency and valence electron in phosphorus.
Need help plz!
-Which property describes a mixture?-
A. It cannot be separated by physical methods.
B. It has a single chemical composition.
C. It cannot have more than one state of matter.
D. It cannot be described by a chemical symbol or formula.
Answer:
D as a mixture is not a compound and it does not have it's own chemical formula
Explanation: Sauce me brainliest
It cannot be described by a chemical symbol or formula.
- Chilio
Which of the following requires more energy then they produce?
Exothermic
Endothermic
(the subject is science but it wasn’t an option)
Answer:
The answer is endothermic
Which element has the larger ionization energy element E or Element M???
Answer: helium has the largest first ionization energy, while francium has one of the lowest.
Explanation:
The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.
Answer:
Helium has the highest
Explanation:
Find molar mass of a gas when the density is given as 1.25g / L
How many atoms are in 4.72 moles or Ar?
Answer:
Argon is a chemical element with the symbol Ar and atomic number 18.
Explanation:
Answer:
Avogadro's number is a very important relationshiptoremember: 1 mole = 6.022×1023 6.022 × 1023atoms, molecules, protons, etc.
...
Explanation:
jayfeather friend me
HELP PLSSPLSPLSSS ILL GIVE BRAINLIEST
what is metaphase
HELEPWOAUSJSKQJDHEHR
Answer:
the second stage of cell division. its between prophase and anaphase during the chromosomes become attached to spindle fibers.
_N2 + _H2 = _NH3
Will there be any leftover reactants left?
(Kinda urgent)
Answer:
This reaction is the synthesis of Ammonia using Nitrogen and Hydrogen gas.
N+H→NH3
We must remember that Nitrogen and Hydrogen are both diatomic molecules in their standard gas form. This adjusts the equation to
N2+H2→NH3
Now we need to adjust coefficients in order to balance the atoms on each side of the equation. Currently, we have 2 atoms of nitrogen and 2 atoms of hydrogen on the reactant side and 1 atom of nitrogen and 3 atoms of hydrogen on the product side.
We can balance the hydrogens by placing a coefficient of 2 in front of ammonia and a coefficient of 3 in front of the hydrogen.
N2+3H2→2NH3
This gives us 6 hydrogen on each side and coincidentally the nitrogens now equal 2 on each side.
Explanation:
I hope this was helpful.
SMARTERTEACHER
Answer:
Balance the equation N2 + H2 ⇒ NH3
Balancing chemical equations is usually easier than it looks
There are 2 Nitrogens and 2 Hydrogens on the left side
There are 1 Nitrogen and 3 Hydrogens on the right side
Hydrogen seems to be the more complicated term so we should start with that
_N2 + _H2 ⇒ _NH3
With 2 H on one side and 3 on the other, our common multiple is 6
To balance the H we need to multiply H2 by 3 and NH3 by 2
_N2 + 3H2 ⇒ 2NH3
Now that we have H balanced, we need to look at N
There are 2 Nitrogens on both sides of the equation, so in this case, it is done
1pt Which of the following is NOT true about the role tectonic forces play in the rock cycle?
O A. When plates pull apart, rocks melt, and magma forms igneous rocks.
O B. When plates crash together, rocks are buried and form metamorphic rocks.
O c. When plates slide over and under each other, the heat and pressure form igneous rocks.
OD. When rocks push upward and form mountains, the erosion of the mountains can produce sediment.
Tectonic forces do not cause plates to slide over and under each other, to produce heat and pressure which forms igneous rocks
What is the rock cycle?The rock cycle is a cycle which describes how the three basic rock types are related and how earth processes convert one rock type into another over geologic time.
Plate tectonic forces together with weathering and erosional processes, are responsible for the rock cycle.
Tectonic forces play the following roles in rock cycle:
When plates pull apart, rocks melt, and magma forms igneous rocks.When plates crash together, rocks are buried and form metamorphic rocksWhen rocks push upward and form mountains, the erosion of the mountains can produce sedimentTherefore, the statement that when plates slide over and under each other, the heat and pressure form igneous rocks is not True.
Learn more about rock cycle at: https://brainly.com/question/22142661
#SPJ2
Which type of force is the magnet using to move the nail?
A nail moving towards a magnet
A) Friction
B) Gravity
C) Pull
D) Push
Answer:
a
Explanation:
Answer:
Explanation:
gravity
Why can't I find a cute Asian dude that dresses well?
Answer:
ummmmmmm just not lookin good enough i guess lol
Explanation:
ty 4 the points