Which car will experience a greater KE, a car traveling at 16 m/s or a half as massive car traveling at 32 m/s

Answers

Answer 1

Answer:

The car that is hald as massive

Explanation:

We can use the eqation for kinetic energy to solve this problem

KE = 1/2mv^2 (where m is mass and v is velocity/speed)

Lets give the original car a mass of 100kg and use the equation

KE = 1/2(100kg)(16m/s)^2 = 12800J

and now lets find kinetic energy of the half as massive car

KE2 = 1/2(50kg)(32m/s)^2 = 25600J

From this, we find that the hald as massive car will experience a greater kinetic energy while travling at double the velocity


Related Questions

where in space did the expansion of the universe begin?

Answers

Answer:

The big bang

Explanation:

It is theorized the expansion of the universe began with the big bang, the universes expansion therefore did not begin in a spot of the universe rather the universe expanded from the big bang.

A digital stopwatch reading 0:13 37. Read the elapsed time on the stopwatch and answer the questions. In which digit is there the least amount of confidence? How many significant figures does this measurement have?.

Answers

The digit with the least amount of confidence can be seen in the second part which is 7.

The number of significant figures in the measurement of the stopwatch is 4.

An elapsed time is the difference between the time prior to the commencement of an event and the time at which the event has ended.

From the stopwatch, the elapsed time is given as:

0hour : 13 minutes : 37 seconds

The digit with the least amount of confidence can be seen in the seconds part is 7.

A significant figure is a real figure that is dependable and absolutely essential to convey the quantity of something.

The number of significant figures in the measurement of the stopwatch is 4.

Learn more about elapsed time here:

https://brainly.com/question/10403745

Answer: 7 and 4

Explanation: A digital stopwatch reading 0:13 37.

Read the elapsed time on the stopwatch and answer the questions.

In which digit is there the least amount of confidence?

7

How many significant figures does this measurement have?

4

How did Ptolemy adapt the geocentric model so he could account for the motion of the planets?

ANSWER ASAP

Answers

Answer:

The most important solution to this problem was proposed by Claudius Ptolemy in the 3rd century AD. He argued that planets move on two sets of circles, a deferent and an epicycle. This explained retrograde motion while keeping the planets in their circular orbits around the Earth.

Explanation:

An engine has an energy input of 125 J, and 35 J of that energy is transformed into useful energy. What is the efficiency of the engine? 28% 35% 72% 90%.

Answers

The efficiency of the engine at the given useful energy and input energy is 28%.

The given parameters:

Input energy of the engine, = 125 JUseful energy of the engine, 35 J

The efficiency of the engine is defined as the ratio of the output energy (useful energy) to the input energy and it is calculated as follows;

[tex]efficiency\ = \frac{0ut put \ energy}{1nput \ energy} \times \ 100\%\\\\efficiency\ = \frac{35}{125} \times 100\%\\\\efficiency\ = 28 \ \%[/tex]

Thus, the efficiency of the engine at the given useful energy and input energy is 28%.

Learn more about efficiency of engine here: https://brainly.com/question/6751595

Answer:

ITS A

Explanation:

what is the purpose of the thermal energy tranfer lab

Answers

Answer:thermal Energy Transfer in Mixtures Purpose: The purpose of this experiment is to discover how exactly the final temperature of a mixture, involving a substance and hot water, is affected and impacted by the type of substance used. This means that when hot water is mixed with another substance, it must be determined

Explanation:

did this on edge

On a frictionless surface how much force is necessary to accelerate a 0.49 kg object to the left at 4.8 m/s2?

Answers

Answer:

2.35 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question

force = 0.49 × 4.8 = 2.352

We have the final answer as

2.35 N

Hope this helps you

A 50 kg swimmer goes off end of water slide at 10 m/s- what is swimmers momentum ?

Answers

Mass of the swimmer (m) = 50 Kg.Velocity of the swimmer (v) = 10 m/sWe know, momentum = mass × velocityTherefore, the swimmer's momentum = mv = (50 × 10) Kg m/s = 500 Kg m/s

Answer:

The swimmer's momentum is 500 Kg m/s.

Hope you could get an idea from here.

Doubt clarification - use comment section.

(50 POINTS) please answer each question:

what is the Distance from Earth (light years)

what is the Visual Luminosity in comparison to Sun

what is the Surface Temperature (Kelvin)

stars:

Sun




Alpha Centauri A




Sirius B




Barnard’s Star




Vega




Proxima Centauri

Answers

Answer:

i know the first one.

Explanation:

the distance from earth in light years is 6 trillion miles.

An astronomical unit (A.U.) is 1 point A) a term for defining the luminosity of a star B) the average distance from the Earth to the sun C) the average distance of any given planet to the sun D) equal to a light year

Answers

Answer:

B) the average distance from the Earth to the Sun

Explanation:

A multi-dimensional being reaches down to Earth and pulls you out of the universe. You are then thrown back into the universe at a place and time of the being's choosing, and you are permitted to leave only after you have identified your surroundings. This process is repeated several times. Through a scientifically unexplainable miracle, you are able to survive in every one of the places that you find yourself. In each scenario below, identify your surroundings (and potentially your cosmic era) from among the choices given. You find yourself in a place that is unimaginably hot and dense. A rapidly changing gravitational field randomly warps space and time. Gripped by these huge fluctuations, you notice that there is but a single, unified force governing the universe.

Required:
Where are you?

Answers

You are in an early universe.

In the study of the evolution of the universe, it has been determined before Plank time (before the big bang and right after it), the early universe had the following characteristics:

There was only one single force acting over all that existed.The early universe was very hot and dense because all matter had contracted before the big bang.Space and time were wrapped.

These characteristics match the ones described, based on this, we can conclude you are in an early universe.

Learn more about universe in: https://brainly.com/question/9724831

what does it mean to be skeptical of health fraud

Answers

Answer: yea ma’am I’m sorry but you still

Something that is falsely advertised to help different health issues. An example could be Eyeball massagers

Which two changes would decrease the electric force between two charged
particles?
- A. Decrease the charge of one of the particles.
B. Increase the charge of both particles.
C. Increase the charge of one of the particles.
D. Decrease the distance between the particles.
E. Increase the distance between the particles.


PLEASE HELP I KEEP FAILING!!!!

Answers

Answer:

it is b and e

Explanation:

if u look at the words twice you will notice that b and e are both saying the same meanings just in diff rent words way u need to look close on things like that and u will get passing grades

True or false organisms only compete with their own species?

Answers

Answer: yes

Explanation:

Animals of different species typically compete with each other only for food, water and shelter. But they often compete with members of their own species for mates and territory as well.

How does production and possibilities curve show efficiency grouth and opportunity cost

Answers

Answer:

The Production Possibilities Curve (PPC) is a model that captures scarcity and the opportunity costs of choices when faced with the possibility of producing two goods or services. Points on the interior of the PPC are inefficient, points on the PPC are efficient, and points beyond the PPC are unattainable.

Explanation:

What is an object's mass if it accelerates at 5 m/s2 when a force of 0.5 N is applied?

Answers

Answer:

0.1kg

Explanation:

mass = force / acceleration

0.5 / 5

0.1kg

How do you find the input distance

Answers

Answer:

The work efficiency formula is efficiency = output / input, and you can multiply the result by 100 to get work efficiency as a percentage. This is used across different methods of measuring energy and work, whether it's energy production or machine efficiency.

Explanation:

look it up and you’ll find a answer that’s how i answer all my school work

I'll give brainlest
*the first pic is for Alberto and second for the mouse*
Question 1
Alberto created a graph to illustrate his trip. Answer the questions below.
A. How does Alberto's motion change at point B?
B. What is Alberto's speed from point C to point D?
C. What happens at point D? (1 point)

Question 2
Answer the question below about Smokey The Mouse.
A. Use inertia to explain how a balanced force will affect his motion. (Newton's 1st Law)
B. What are two ways Smoky can increase his speed? (Use Newton's 2nd Law to help you)
C. What is an example of an action and reaction at work in this picture? (Use Newton's 3rd Law to help you)

Answers

Answer:

The mouse exerts a force on the ground and the ground exerts an equal and opposite reaction force on the mouse.

At point B, Alberto's distance covered increases with time, equal distance is covered in equal time interval. The speed increases uniformly. At the point C to D, the distance covered with time remains the same. At the point D, equal distance is no longer covered in equal time intervals.

According to the law of inertia, an object will remain at rest or in a state of uniform motion unless it is acted upon by an unbalanced force. This means that smokey mouse will continue moving uniformly unless a force acts on it.

From Newton's second law; F = ma and a = F/m. F = force , m= mass, a = acceleration. This implies that smokey mouse can increase its speed by;

Increasing the force acting on the mouse

Decreasing the mass of the mouse

Action and reaction is encountered as the mouse is walking. The mouse exerts a force on the ground and the ground exerts an equal and opposite reaction force on the mouse.

Explanation:

Read the picture, please. I am a bit confused about what it means when it says which one supports it.

Answers

Answer:

not suppoted

not supported

support

Put the waves in order from shortest to longest wavelength

Answers

Answer:

b, a, c

Explanation:

The middle one has the shortest wavelength, then it's the top one and the last one has the longest wavelength.

what was stored when you bent the ruler in your left hand?

Answers

Answer:

potential energy

the name comes from the fact that the ruler has "potential" to act

Explanation:

Explanation:

The deformation of the ruler creates a force in the opposite direction, known as a restoring force.

I'm not sure if it's correct...

rube goldberg machine steps

Answers

Answer:

Rube Goldberg Machine is "a comically involved, complicated invention, laboriously contrived to preform a simple operation." 2. What are the 6 Simple Machines? A. The 6 Simple Machines are: wedge, screw, lever, wheel and axel, inclined plane and pulley.

a race car is traveling at a speed of 80.0m/s on a circular race track of radius 450m what is the centripetal acceleration

Answers

Answer:

The answer of this question is =1.258*10-4

An object is struck by a 5N force for 8 seconds causing the object to experience a change in it's motion. What is the impulse acting on the object?

Answers

Hi there!

Recall the equation for impulse:

[tex]I = \Delta p = F * t[/tex]

Where:

I = Impulse (Ns)

F = Force (N)

t = Time (s)

Plug in the given values:

I = 5 · 8 = 40 Ns

The apparent brightness of stars in general tells us nothing about their distances; we cannot assume that the dimmer stars are farther away. In order for the apparent brightness of a star to be a good indicator of its distance, all the stars would have to be:__________.
a. at the same distance
b. the same composition
c. the same luminosity
d. by themselves instead of in binary or double-star systems
e. a lot farther away than they presently are

Answers

The answer is have the same luminosity

do muscle and bone weigh more than fat

Answers

Answer: . You may have heard that muscle weighs more than fat. However, according to science, a pound of muscle and a pound of fat weigh the same. The difference between the two is density.

Explanation:

Muscle weighs more than fat. "In simple terms, a pound of muscle weighs the same as a pound of fat," Heimburger tells WebMD. "The difference is that muscle is much more dense than body fat. Therefore, a pound of muscle will take up much less room in your body than a pound of fat.


(a) One medium is air, in which the speed of light is 3.00 x 108 m/s. The other
medium is ice, in which light has a speed of 2.29 x 108 m/s. Use this information to
identify medium A and medium B. Explain

Answers

Answer:

WARNING WRONG SPELLING.that is a ternadow and very dangeruse air .

HELP!!!
Which of the following statements is true about magnets?

A. The molecules of the atom are unaligned
B. The orientation of atoms does not affect a magnet
C. The north pole is stronger than the south pole
D. The molecules of the atom are all aligned

Giving brainliest to the correct answer! (If both are correct I'll give whoever answered correctly 1st brainliest!)

Answers

Answer:

Explanation:

A is not correct. That means that D is since they offer exactly the opposite meanings.  

C is rubbish. One pole could not be stronger than the other. Heaven help us if touched the stronger pole.

B the very point of a magnet is that it does matter how the atoms are orientated.

Draw a diagram that represents how a mechanical wave interacts with a particular material.
Create a diagram and include reflection, absorption, and transmission.
Write a brief description (3+ sentences) of the interaction of the mechanical waves and the material. Include an explanation of how the amplitude and frequency of the wave are affected.
85 POINTS!!

Answers

When mechanical waves interact with material, it transfer its energy to the material.

What are mechanical waves?

Mechanical waves are the type of waves that require a medium for transporting their energy from one region to another. Mechanical waves depend on particle interaction in order to transport their energy.

The amplitude and frequency of the wave are negatively affected due to the striking of mechanical waves with the material.

Learn more about waves here: https://brainly.com/question/75996

Answer:

i have a screenshot just use mine https:/ss27

Explanation:

what is the danger to spacecraft and astronauts from micrometeoroids?

Answers

Answer:

Suppose the micrometeoroid weighed 1 g = .001 kg

Suppose also the spacecraft were moving at 18,000 mph (1.5 hrs per rev)

Usually, the smaller particle would be moving but for simplicity suppose that it were stationary wrt the ground

v = 18000 miles / hr * 1500 m/mile / 3600 sec/hr = 7500 m/s

KE = 1/2 * .001 kg * (7500 m)^2 = 28,125 Joules

One can see that 28000 Joules could be damaging amount of energy

The relationship between Acceleration and Mass is described as:
O a. Equal
O b. Directly Proportional
O c. Inversely Proportional
O d. Opposite
O e. None of these

Answers

Explanation:

According to Newton's second law

[tex]\\ \sf{:}\dashrightarrow Force=Mass\times Acceleration [/tex]

[tex]\\ \sf{:}\dashrightarrow Mass=\dfrac{Force}{Acceleration}[/tex]

[tex]\\ \sf{:}\dashrightarrow Mass\propto \dfrac{1}{Acceleration}[/tex]

Option C

Other Questions
Which system of inequalities is shown in the graph?36 > (x + 3)2 + (y 2)2 and 16 > (x 4)2 + y236 > (x 2)2 + (y + 3)2 and 16 > (x 4)2 + y236 < (x + 3)2 + (y 2)2 and 16 > (x 4)2 + y236 < (x 2)2 + (y + 3)2 and 16 > (x 4)2 + y2 Let f(x) = x2 1 and g(x) = 3x. Find gf and state its domain "In absence of population education , the world population would skyrocket" . Justify this statement considering the need and importance of population education . . ________ massage relieves pain and anxiety, eases depression and speeds up recovery from medical problems. A. a B. the C. 0 D. an Company XYZ is working on a marketing strategy for a new oral hygiene product and just discovered that XYZ's biggest competitor is launching a very similar product a month later. In conducting a SWOT analysis, the launch of the competitor's product represents an opportunity.a. Trueb. False Cc tuyn no sau y c gi l cc tuyn pha? What promotional strategy is being employed when Blue Cross/Blue Shield (a health insurance company) runs advertisements targeting Boeing Co. employees, in hopes that they will persuade their bosses to consider adopting a Blue Cross/Blue Shield insurance plan for their company if 2x+20 and 3x+20 makes a straight angke find value of x simplify (-216mtn square)/(8mn) describe the relation between population and environment in five points Peter plays basketball. In one game, he needs to score at least 38 points to have aseason high of 1,200 points. He scores x number of 2 pointers and y number of 3pointers and meets his goal of at least 38 points.Using the variables given, write an inequality describing this scenario. If the ring rolls (without slipping) all the way to point 2, what is the ring's energy at point 2 in terms of h2 and v2? Convert the angle 0 = 310 to radians. Express your answer exactly. Which could be the graph of f(x) = |x - h| + k if h and k are both positive? 02 - O Renascimento cultural e artstico europeu do sculo XVI foi um processo lento e prolongado de transformaes que remontam ao perodo final da Idade Mdia, principalmente a partir do sculo XI. A partir dos seus conhecimentos referentes ao perodo, responda: a) Quais os principais aspectos valorizados pelos artistas renascentistas em suas obras e em quais locais da Europa esta produo artstica foi mais valorizada? Find the missing side of the triangle A cyclopropane-oxygen mixture is used as an anesthetic. If the partial pressure of cyclopropane in the mixture is 330 mmHg and the partial pressure of the oxygen is 1.0 atm, what is the total pressure of the mixture in torr A chemist is preparing to carry out a reaction that requires 5.75 moles of hydrogen gas. The chemist pumps the hydrogen into a 10.5 L rigid steel container at 20.0 C. To what pressure, in kPa, must the hydrogen be compressed? (Show all work for full credit and circle your final answer) * A chemist dissolves 14.0 g of calcium hydroxide in one beaker of water, and 17.0 g of iron(III) chloridein a second beaker of water. Everything dissolves.When the two solutions are poured together, solid iron(III) hydroxide precipitates.1. Write a balanced molecular equation.2. Determine the identity of the limiting reactant.3. Predict the mass of iron(III) hydroxide product. Write a program which will create an array of size 10. Fill the array with random numbers from 0 - 100. (use a loop and random number generator rand) Once you are done with this, you will then write a loop which will go through each element of the array, display the contents of that element and tell if that element is an even number or odd number. Go through all the elements again and this time tell me how many are even and odd.