Which branch of Earth science focuses more specifically on Earth's atmosphere?

Answer:

d. amine.

It becomes an amine.

Explanation:

With general formular

[tex]{ \bf{primary \: amine :R - NH _{2}}} \\ { \bf{secondary \: amine : R {}^{i} - NH - R}} \\ { \bf{tertiary \: amine :R {}^{ii} - N(R {}^{i} ) - R }}[/tex]

R is the aryl group such as alkane

Answer:

Elements in the same period show trends in atomic radius, ionization energy, electron affinity, and electronegativity.

Answer:

There are no options in this question, however, it can be answered based on general understanding

- The number of neutrons each isotope contain

Explanation:

Isotopes are atoms of an element with the same atomic number or number of protons but different mass number/atomic masses. Since isotopes have same proton numbers, they have similar chemical behavior or identity.

However, difference in atomic mass or mass number of the same atomic number indicates that the number of neutrons each isotope contain differs from one another. Hence, in two isotopes of chlorine given as follows: Cl-35 and Cl-37, the NUMBER OF NEUTRONS in each atom differentiates the two isotopes.

Cl-35 contains 18 neutrons while Cl-37 contains 20 neutrons.

Answer:

[ICl] = 0.0420 M

[I₂]  = [Cl₂] = 0.0140 M

Explanation:

Step 1: Calculate the initial concentration of ICl

[ICl] = 0.350 mol / 5.00 L = 0.0700 M

Step 2: Make an ICE chart

        2 ICl(g) ⇄ I₂(g) + Cl₂(g)

I        0.0700     0         0

C        -2x          +x        +x

E    0.0700-2x      x          x

The concentration equilibrium constant (Kc) is:

Kc = 0.110 = [I₂] [Cl₂] / [ICl]² = x² / (0.0700-2x)² = (x/0.0700-2x)²

0.332 = x/0.0700-2x

x = 0.0140

The concentrations at equilbrium are:

[ICl] = 0.0700-2x = 0.0700-0.0280 = 0.0420 M

[I₂]  = [Cl₂] = x = 0.0140 M

Answer:

The bond between sodium sulfate is an ionic bond since it's a bond between a metal and non metals however the bond between sulfur and oxygen is a covalent bond since the two are non metals and the other reason that makes this an ionic bond is that there is both losing and gaining of electrons..

I hope this helps

Answer:

gu kha fuschhehdjdvdbeodbr

Answer:

a. Ag ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

b. Mg ---> can serve as a sacrificial anode for iron because it is higher than iron in the reactivity series. Hence, it is more reactive than iron.

c. Cu ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

d. Pb ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

e. Sn ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

f. Zn ---> can serve as a sacrificial anode for iron because it is higher than iron in the reactivity series. Hence, it is more reactive than iron.

g. Au ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

Explanation:

Cathodic protection of iron involves using another more reactive metal as a sacrificial anode. The reactivity series of metals arranges metals based on decreasing order of reactivity. The more reactive metals are found higher up in the series while the least reactive metals are found at the lower ends of the series. Thus, metals above iron in the reactivity series can serve as sacrificial anodes by protecting against corrosion, while those lower than iron cannot.

Based on the reactivity series, the following metals can be classified as either a sacrificial anode for iron or not:

a. Ag ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

b. Mg ---> can serve as a sacrificial anode for iron because it is higher than iron in the reactivity series. Hence, it is more reactive than iron.

c. Cu ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

d. Pb ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

e. Sn ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

f. Zn ---> can serve as a sacrificial anode for iron because it is higher than iron in the reactivity series. Hence, it is more reactive than iron.

g. Au ---> cannot serve as a sacrificial anode for iron because it is lower than iron in the reactivity series. Hence, it is less reactive than iron.

Answer:

89.04 g of NaNO₃.

Explanation:

We'll begin by converting 838 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

838 mL = 838 mL × 1 L / 1000 mL

838 mL = 0.838 L

Next, we shall determine the number of mole of NaNO₃ in the solution. This can be obtained as follow:

Volume = 0.838 L

Molarity = 1.25 M

Mole of NaNO₃ =?

Mole = Molarity × volume

Mole of NaNO₃ = 1.25 × 0.838

Mole of NaNO₃ = 1.0475 mole

Finally, we shall determine the mass of NaNO₃ needed to prepare the solution. This can be obtained as follow:

Mole of NaNO₃ = 1.0475 mole

Molar mass of NaNO₃ = 23 + 14 + (16×3)

= 23 + 14 + 48

= 85 g/mol

Mass of NaNO₃ =?

Mass = mole × molar mass

Mass of NaNO₃ = 1.0475 × 85

Mass of NaNO₃ = 89.04 g

Therefore, 89.04 g of NaNO₃ is needed to prepare the solution.

Answer:

cool or increase pressure

Explanation:

Answer:

pH = 12.43

Explanation:

...is titrating 212.7 mL of a 0.6800 M solution of hydrazoic acid (HN3) with a 0.2900 M solution of KOH. The p Ka of hydrazoic acid is 4.72. Calculate the pH of the acid solution after the chemist has added 571.6 mL of the KOH solution to it.

To solve this question we need to know that hidrazoic acid reacts with KOH as follows:

HN3 + KOH → KN3 + H2O

Moles KOH:

0.5716L * (0.2900mol /L) =0.1658 moles of KOH

Moles HN3:

0.2127L * (0.6800mol/L) = 0.1446 moles HN3

As the reaction is 1:1, the KOH is in excess. The moles in excess of KOH are:

0.1658 moles - 0.1446 moles =

0.0212 mol KOH

In 212.7mL + 571.6mL = 784.3mL = 0.7843L

The molarity of KOH = [OH-] is:

0.0212 mol KOH / 0.7843L = 0.027M = [OH-]

The pOH is defined as -log [OH-]

pOH = -log 0.027M

pOH = 1.57

pH = 14 - pOH

pH = 12.43

Answer:

Once you have collected 40 mL of distillate, you should ________.

turn off the hot plate and carefully lower the lab jack, making sure that no cords or hoses get caught in it.

Explanation:

Distillate is the product obtained from the process of distillation.  Distillation is the separation of components of a liquid mixture based on different boiling points. Distillation can be used to purify alcohol, for desalination, refining of crude oil, and for obtaining liquefied gases.  A lab jack is an essential tool that supports and lifts hotplates, glassware, baths, and other small lab equipment requiring stable surfaces at a specific height.

Answer:

An alkaline is a substance that dissolves in water to produce hydroxyl ions (OH-)

Explanation:

The pH range of an alkaline is from 8–14.

Acidic pH ranges from 0–6.9.

Answer:

2.076

Explanation:

1 mole is 6.02 * 10^23

To convert from atoms (or molecules or compounds or ions etc.) to mols, you divide the number of atoms (or molecules or etc.) by 6.02 * 10^23

So it is (1.25 * 10^24)/(6.02 * 10^23)

=2.076

Answer:

[tex]\boxed {\boxed {\sf 2.08 \ mol \ C}}[/tex]

Explanation:

We are asked to convert a number of carbon atoms to moles.

We will use Avogadro's Number for this, which is 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. For this problem, the particles are atoms of carbon. There are 6.022 ×10²³ atoms of carbon in 1 mole of carbon.

We will also use dimensional analysis to solve this problem. To do this, we use ratios. Set up a ratio using the underlined information.

[tex]\frac {6.022 \times 10^{23} \ atoms \ C}{1 \ mol \ C}[/tex]

We are converting 1.25 ×10²⁴ atoms of carbon to moles, so we multiply the ratio by that value.

[tex]1.25 \times 10^{24} \ atoms \ C* \frac {6.022 \times 10^{23} \ atoms \ C}{1 \ mol \ C}[/tex]

Flip the ratio. It remains equivalent, but it allows us to cancel the units atoms of carbon.

[tex]1.25 \times 10^{24} \ atoms \ C* \frac{1 \ mol \ C} {6.022 \times 10^{23} \ atoms \ C}[/tex]

[tex]1.25 \times 10^{24} * \frac{1 \ mol \ C} {6.022 \times 10^{23} }[/tex]

[tex]\frac{1.25 \times 10^{24} } {6.022 \times 10^{23} } \ mol \ C[/tex]

[tex]2.075722351 \ mol \ C[/tex]

The original measurement of atoms has three significant figures, so our answer must have the same. For the number we calculated, that is the hundredths place. The 5 in the thousandths place tells us to round the 7 up to an 8.

[tex]2.08 \ mol \ C[/tex]

1.25 ×10²⁴ atoms of carbon is equal to approximately 2.08 moles of carbon.

Answer:

Hence the solids that should test to investigate the effects of cations on pH is

[tex]AlBr_{3}[/tex] (Cation is Al 3+)  

[tex]MgCl_{2}[/tex]  ( Cation is Mg 2+)  

[tex]CH_{3} NH_{3} Br[/tex] ( Cation is NH2+).

Explanation:

The solids in the following should you test to investigate the effects of cations on pH.  

[tex]AlBr_{3}[/tex] contains (Cation is Al 3+)  

[tex]MgCl_{2}[/tex] contains ( Cation is Mg 2+)  

[tex]CH_{3} NH_{3} Br[/tex] contains( Cation is NH2+ )

The atoms or the molecules containing the positive charge that gets attracted to the cathode are called cations. The compounds a. [tex]\rm AlBr_{3}[/tex], c. [tex]\rm MgCl_{2}[/tex] and e. [tex]\rm CH_{3}NH_{3}Br[/tex] should be investigated.

Cations are the positive charge containing molecules and atoms that have more protons in their nucleus than the number of electrons in their shells. They are formed when they lose one or more electrons to another atom.

The addition or release of the electrons of the cations and anions affects the pH system as absorption of the cation decreases the pH and absorption of the anions increases the pH.

Hence, [tex]\rm Al^{3+}[/tex], [tex]\rm Mg^{2+}[/tex] and [tex]\rm NH^{2+}[/tex] are the cation that should be investigated. The addition of the cations will reduce the pH of the reaction.

Therefore, absorption of the cation reduces the pH.

Learn more about cations and pH here:

https://brainly.com/question/13800672

Explanation:

The given data is:

The half-life of gentamicin is 1.5 hrs.

The reaction follows first-order kinetics.

The initial concentration of the reactants is 8.4 x 10-5 M.

The concentration of reactant after 8 hrs can be calculated as shown below:

The formula of the half-life of the first-order reaction is:

[tex]k=\frac{0.693}{t_1_/_2}[/tex]

Where k = rate constant

t1/2=half-life

So, the rate constant k value is:

[tex]k=\frac{0.693}{1.5 hrs}[/tex]

The expression for the rate constant is :

[tex]k=\frac{2.303}{t} log \frac{initial concentration}{concentration after time "t"}[/tex]

Substitute the given values and the k value in this formula to get the concentration of the reactant after time 8 hrs is shown below:

[tex]\frac{0.693}{1.5 hrs} =\frac{2.303}{8 hrs} x log \frac{8.4x10^-^5}{y} \\ log \frac{8.4x10^-^5}{y} =1.604\\\frac{8.4x10^-^5}{y}=10^1^.^6^0^4\\\frac{8.4x10^-^5}{y}=40.18\\y=\frac{8.4x10^-^5}{40.18} \\=>y=2.09x10^-^6[/tex]

Answer: The concentration of reactant remains after 8 hours is 2.09x10^-6M.

Explanation:

As you know, the conjugate base of an acid is determined by looking at the compound that's left behind after the acid donates one of its acidic hydrogen atoms.

The compound to which the acid donates a proton acts as a base. The conjugate base of the acid will be the compound that reforms the acid by accepting a proton.

In this case, sulfurous acid has two protons to donate. However, the conjugate base of sulfurous acid will be the compound left behind after the first hydrogen ion is donated.

Best practices for fume hoods: work 25 cm inside, organize items to one side, use raised ledge; avoid open sash and quick movements.

Laboratory fume hoods must be used safely. Workers should operate at least 25 cm within the hood to preserve ventilation and avoid dangerous chemicals. Place things on one side of the hood to preserve ventilation and prevent clogging.

A raised ledge on the rear of the hood prevents things from falling in and impeding airflow. Avoid fully opening the sash to maintain ventilation and containment. Fast, rapid motions can interrupt airflow, so prevent them. These practises guarantee the fume hood contains harmful compounds, making the lab safer. Therefore, option (B), (D) and (E) are correct.

Learn more about fume hood, here:

https://brainly.com/question/29069541

#SPJ12

Answer:

a. 6.15 mL b. 30.73 mL

Explanation:

a. What volume of this ketamine solution would the 65.0 kg user have to inject to experience a high at 0.400 mg/kg?

Since we have 0.250 g of ketamine in 1/4 cup of water and 1 cup of water equals 236.5 mL, we need to find the concentration of ketamine we have.

So concentration of ketamine C = mass of ketamine, m/volume of water, V

m = 0.250 g and V = 1/4 cup = 1/4 × 236.5 mL = 59.125 mL

So, C = m/V = 0.250 g/59.125 mL = 0.00423 g/mL = 4.23 mg/mL

Since the user has a mass of 65 kg and requires a high at 0.400 mg/kg, the mass of ketamine for this high is M = 65 kg × 0.400 mg/kg = 26 mg

Since mass, M = concentration ,C × volume, V

M = CV

V = M/C

The volume of ketamine required for the 0.400 mg/kg high is

V = 26 mg/4.23 mg/mL

V = 6.15 mL

b. What volume of this ketamine solution would the user have to inject to become unconscious at 2.00 mg/kg?

Since the concentration of ketamine is C = 4.23 mg/mL, and Since the user has a mass of 65 kg and requires an injection of 2.00 mg/kg to be unconscious, the mass of ketamine required to be unconscious is M' = 65 kg × 2.00 mg/kg = 130 mg

Since mass, M' = concentration ,C × volume, V

M' = CV

V = M/C

The volume of ketamine required for the 2.00 mg/kg unconscious injection is

V = 130 mg/4.23 mg/mL

V = 30.73 mL

Answer:

2257000 J

Explanation:

Applying,

Q = Cₓm.................. Equation 1

Where Q = amount of energy need to boil the water, Cₓ = Enthalpy of vaporization of water, m = mass of water.

From the question,

Given: Cₓ = 2257000 J/kg, m = 1 kg

Substitute these values into equation 1

Q = 2257000×1

Q = 2257000 J

Hence the energy needed to boil all of the water is 2257000 J

Answer:

all cells are produced from other preexisting cells through cell division

Answer:

a. True

Explanation:

The main information that gives an infrared absorption spectrum is the type of functional groups that are present in an organic compound. The infrared (IR) spectroscopy is based on the fact that functional groups absorb light in the IR region of the electromagnetic spectrum (approximately at 2,500-16,000 nm) and induces a vibrational excitation of the covalently bonded atoms in the group. The vibration of the atoms can be of different types, such as stretching, bending, etc. Each functional group (such as the carbonyl group) in an organic compound absorbs at a specific IR frequency so they can be distinguished from an IR spectrum.

Answer:

362g

Explanation:

heat lost by metal= heat gained by acetic acid

tfs are the same so you cando delta T

convert Cal/gc to J/gc

thectgod ig follow

Answer:

pH of buffer solution is 7.0

Initial pH of Weak acid is 3.27

Final pH of weak acid is 3.07

Amount of NaOH added is 1ml

Explanation:

Titration is a process in which acid and base are introduced together until a neutral solution is achieved whose pH value is near to buffer solution which is 7.0, the pH value for acid is below 7 while pH value for base is above 7.

Answer:

See explanation

Explanation:

The IUPAC name of aspirin is 2-Acetoxybenzoic acid. It is composed of an acetoxy moiety and a benzoic acid moiety.

The compound can be hydrolysed under prolonged storage conditions to yield acetic acid which causes the vinegar like odour.

Also, one of the products of this hydrolysis bears a phenol group which reacts with FeCl3 to give a purple color.

Answer:

[tex]{ \bf{HI _{(aq)} \: → \: H {}^{ + } _{(aq)} \: + \: \: I {}^{ - } _{(aq)} }}[/tex]

Answer:

NaCl, Na⁺,Cl⁻.

MgCl₂, Mg²⁺, Cl⁻.

CaO, Ca²⁺, O²⁻.

Li₃P, Li⁺, P³⁻.

Al₂S₃, Al³⁺, S²⁻.

Ca₃N₂, Ca²⁺, N³⁻.

FeCl₃, Fe³⁺, Cl⁻.

FeO, Fe²⁺, O²⁻.

Cu₂S, Cu⁺, S²⁻.

Cu₃N₂, Cu²⁺, N³⁻.

ZnO, Zn²⁺, O²⁻.

Ag₂S, Ag⁺, S²⁻.

K₂CO₃, K⁺, CO₃²⁻.

NaNO₃, Na⁺, NO₃⁻.

Ca(HCO₃)₂, Ca²⁺, HCO₃⁻.

Al(OH)₃, Al³⁺,OH⁻.

Li₃PO₄, Li⁺, PO₄³⁻.

K₂SO₄, K⁺, SO₄²⁻.

Explanation:

Sodium chloride. NaCl, formed by the cation Na⁺ and the anion Cl⁻.

Magnesium chloride. MgCl₂, formed by the cation Mg²⁺ and the anion Cl⁻.

Calcium oxide. CaO, formed by the cation Ca²⁺ and the anion O²⁻.

Lithium phosphide. Li₃P, formed by the cation Li⁺ and the anion P³⁻.

Aluminum sulfide. Al₂S₃, formed by the cation Al³⁺ and the anion S²⁻.

Calcium nitride. Ca₃N₂, formed by the cation Ca²⁺ and the anion N³⁻.

Iron(III)chloride. FeCl₃, formed by the cation Fe³⁺ and the anion Cl⁻.

Iron(II)oxide. FeO, formed by the cation Fe²⁺ and the anion O²⁻.

Copper(I)sulfide. Cu₂S, formed by the cation Cu⁺ and the anion S²⁻.

Copper(II)nitride. Cu₃N₂, formed by the cation Cu²⁺ and the anion N³⁻.

Zinc oxide. ZnO, formed by the cation Zn²⁺ and the anion O²⁻.

Silver sulfide. Ag₂S, formed by the cation Ag⁺ and the anion S²⁻.

Potassium carbonate. K₂CO₃, formed by the cation K⁺ and the anion CO₃²⁻.

Sodium nitrate. NaNO₃, formed by the cation Na⁺ and the anion NO₃⁻.

Calcium bicarbonate. Ca(HCO₃)₂, formed by the cation Ca²⁺ and the anion HCO₃⁻.

Aluminum hydroxide. Al(OH)₃, formed by the cation Al³⁺ and the anion OH⁻.

Lithium phosphate. Li₃PO₄, formed by the cation Li⁺ and the anion PO₄³⁻.

Potassium sulfate. K₂SO₄, formed by the cation K⁺ and the anion SO₄²⁻.

2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.

When a solute is dissolved in a solvent, a solution is created. Dissolution is the process through which solutes, or dissolved parts, combine to form a solution inside a solvent. In this procedure, the gas, liquid, or solid dissolves inside the original solvent and forms a solution.

In some polymer applications, dissolution is also an issue since it results in swelling, a loss of strength and stiffness, and a change in volume. Whether a chemical process is man-made or natural, dissolution is crucial. Catalysts are tested using dissolution. 2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.

Therefore, 2.8 g is the minimum mass of HCl in grams that would you need to dissolve a 2.2 g iron bar on a padlock.

To know more about dissolution, here:

https://brainly.com/question/23851972

#SPJ2

Answer:

250ml

Explanation:

call it V

V*0.2=0.05 (moles)

so V=0.05/0.2 = 0.25l = 250ml

We know

[tex]\boxed{\Large{\sf Molarity=\dfrac{No\:of\:moles\:of\:solute}{Volume\:of\:solution\:in\;\ell}}}[/tex]

[tex]\\ \Large\sf\longmapsto Volume\:of\:KI=\dfrac{0.05}{0.2}[/tex]

[tex]\\ \Large\sf\longmapsto Volume\:of\:KI=0.25L[/tex]

[tex]\\ \Large\sf\longmapsto Volume\:of\:KI=250mL[/tex]