where in space did the expansion of the universe begin?

Answer:

Acceleration  is measured in meters per second squared (m/s²) change in velocity is measured in meters per second (m/s) time taken

Answer:

Explanation:

The speed of the wave given only it's frequency and wavelength can be found by using the formula

[tex]c = f \times \lambda[/tex]

where

c is the velocity of the wave in m/s

[tex] \lambda[/tex] is the wavelength in m

f is the frequency in Hz

From the question we have

c = 8 × 24 = 192

We have the final answer as

Hope this helps you

Answer:

Natural light (Sun, stars.etc.) and Artificial light (Lamposts, televisions.etc.)

Hope that helps. x

its an electric magnetic cell this uses electricity

The electromagnetic spectrum allows finding the result for the question of type of electromagnetic wave has a wavelength of 956 nm

The electromagnetic wave is an oscillation of electric fields and magnets field that sustain each other, this wave time has the characteristics that it can travel without a material medium, for which they are of extreme importance.

Consequently the spectrum of electromagnetic waves to each part has been given a different name second to its use, for example

Range                        Name  

Ultraviolet light          200 to 400 nm

Visible light               400 to 700 nm

Infrared light (heat  ) 700 nm to 1 mm

The latter is subdivided into:

 Near infrared          700 nm to 1000 nm (1 μm)

 Medium infrared        1 μm  to 30 μm

 Far infrared             50 μm to 1000 μm

It indicates that the wavelength of the measured radiation is 956 nm, therefore it is in the near infrared range.

Learn more about the electromagnetism spectrum here:  brainly.com/question/23727978

Answer:

405

Explanation:

If the car stops at 45m/s in 9 seconds then it took the car 405 meters to stop

Answer:

weight in 49N

I hope it's correct

Answer:

60

Explanation:

You multiply the acceleration and the force and you get your answer

The initial velocity of the ball when it was projected is 15.64 m/s.

The given parameters:

The initial velocity of the ball is calculated by applying formula for range of projectile as follows;

[tex]R = \frac{u^2 sin(2\theta)}{g} \\\\u^2 = \frac{Rg}{sin(2\theta)} \\\\u = \sqrt{\frac{Rg}{sin(2\theta)} } \\\\u =\sqrt{\frac{24 \times 9.8}{sin(2\times 37)} } \\\\u = 15.64 \ m/s[/tex]

Thus, the initial velocity of the ball when it was projected is 15.64 m/s.

Learn more about range of projectile here: https://brainly.com/question/12870645

Answer:

its A

Explanation:

White dwarf, Sun, red supergiant shows the stars in the correct order, from smallest in size to largest.

More than 1.4 million kilometers span our Sun. However, not every star is the same size. They range in size from that of a metropolis to that of our solar system's half!

The mass of neutron stars is concentrated into a very compact area. Even though they are frequently only 20 to 40 km in diameter, they may hold the mass of one or two Suns. White dwarf stars are a little larger and frequently resemble the size of the Earth.

Compared to our Sun, the greatest supergiant stars can be more than 1500 times bigger. They are now more than 2,000 million kilometres across. Supergiants don't, however, have thousands of times the mass of the Sun. The reason for this is that as supergiants become older, their interiors become considerably more dispersed. Betelgeuse, a red giant in Orion's constellation, is nearly 1000 times broader than the Sun yet only has around 15 times as much mass.

Learn more about star here:

https://brainly.com/question/7379319

#SPJ2

Answer:

IF GOD IS TEIIING YOU SOMETHING JUST DO IT

Explanation:

Answer:

0.46m

Explanation:

Answer:

4 m/s^2

Explanation:

The acceleration is defined as: Δv/Δt (the difference of the velocity over a time period in which happens that difference).

Remember that a difference is calculated by subtracting the initial value of a physical quantity from its final value.

In our case:

Δv = Vfinal - Vinitial = 36m/s - 0 m/s = 36m/s

Δt = 9s

a = Δv/Δt = 36m/s / 9s = 4m/s^2

The impulse of the boxers punch is 28 kgm/s.

The given parameters;

The impulse of the boxers punch is calculated as follows;

[tex]J = Ft[/tex]

where;

The magnitude of the impulse is calculated as follows;

[tex]J = 1400 \times 0.02 \\\\J = 28 \ kg m/s[/tex]

Thus, the impulse of the boxers punch is 28 kgm/s.

Learn more about impulse here: https://brainly.com/question/25700778

Answer:

v = 3 m/s

Explanation:

P is the momentum

m is the mass

v is the velocity

P = m•v

300 = 100•v Divide both sides per 100

300/100 = v

v = 3 m/s

[tex]\text{Given that,}\\\\\text{Momentum, p = 300 kg m s}^{-1}\\\\\text{Mass, m = 100 kg}\\\\\text{We know that,}\\\\p = mv\\\\\implies v = \dfrac pm = \dfrac{300}{100} = 3 ~ \text{m s}^{-1}[/tex]

Answer:

Letter A

Explanation:

Manganese dioxide- Mn02

Nitrogen Dioxide- n02

Strontium bromide- SrBr

The ratio of time of flight for inelastic collision to elastic collision is 1:2

The given parameters;

Considering inelastic collision, the final velocity of the system is calculated as;

[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\m_1u_1 + 0 = v(m_1 + m_2)\\\\v= \frac{m_1u_1}{m_1 + m_2} \ -- (1)\\\\[/tex]

The time of motion of the system form top of the table is calculated as;

[tex]v = u + gt\\\\v = 0 + gt\\\\v = gt\\\\t= \frac{v}{g} \\\\t_A = \frac{m_1u_1}{g(m_1 + m_2)} \ \ ---(2)[/tex]

Considering elastic collision, the final velocity of the system is calculated as;

[tex]m_1u_1 + m_2 u_2 = m_1v_1 + m_2v_2\\\\m_1u_1 + 0 = m_1v_1 + m_2v_2\\\\m_1 u_1 = m_1v_1 + m_2v_2[/tex]

Apply one-directional velocity

[tex]u_1 + (-v_1) = u_2 + v_2\\\\u_1 -v_1 = 0 + v_2\\\\v_1 = v_2 -u_1[/tex]

Substitute the value of [tex]v_1[/tex] into the above equation;

[tex]m_1u_1 = m_1(v_2 - u_1) + m_2 v_2\\\\m_1u_1 = m_1v_2 -m_1u_1 + m_2v_2\\\\2m_1u_1 = m_1v_2 + m_2v_2\\\\2m_1u_1= v_2(m_1 + m_2)\\\\v_2 = \frac{2m_1u_1}{m_1+ m_2} \ --(3)[/tex]

where;

[tex]v_2[/tex] is the final velocity of the block after collision

Since the bullet bounces off, we assume that only the block fell to the ground from the table.

The time of motion of the block is calculated as follows;

[tex]v_2 = v_0 + gt\\\\v_2 = 0 + gt\\\\t = \frac{v_2}{g} \\\\t_B = \frac{v_2}{g} \\\\ t_B = \frac{2m_1u_1}{g(m_1 + m_2)} \ \ ---(4)[/tex]

The ratio of time of flight for inelastic collision to elastic collision is calculated as follows;

[tex]\frac{t_A}{t_B} = \frac{m_1u_1}{g(m_1 + m_2)} \times \frac{g(m_1 + m_2)}{2m_1u_1} \\\\\frac{t_A}{t_B} = \frac{1}{2} \\\\t_A:t_B = 1: 2[/tex]

Learn more about elastic and inelastic collision here: https://brainly.com/question/7694106

Taking into account the Newton's first Law, the correct answer is option C. To overcome an object's inertia, it must be acted upon by a force.

Newton's First Law, also called the Law of inertia, indicates that "Every body perseveres in its state of rest or of uniform rectilinear motion unless it is forced to change its state by forces impressed on it." This means that for a body to come out of its state of rest or of uniform rectilinear motion, it is necessary for a force to act on it.

In other words, it is not possible for a body to change its initial state (be it rest or motion) unless one or more forces intervene.

Finally, the correct answer is option C. To overcome an object's inertia, it must be acted upon by a force.

Learn more:

Answer:

C) Force

Explanation:

Answer:

1 atmospheris pressure is equal to10.33 meter under water

Explanation:

right ??

Answer:

thats ummm

Explanation:

law of inertia

Newton’s 1 law

Answer:

Galaxies are too far away for astronomers to take real 3D measurements, but we can infer their shape based on the movement of stars. ... This is also true of less common spiral galaxies like the Milky Way. The bulge near the center contains older stars, while the flattened arms are home to younger ones.

Explanation:

The orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.

A star is defined as a celestial object consisting of a luminous sphere of plasma held together by self-gravity where the closest star to Earth is the Sun. While many other stars are visible to the uncovered eye at night, their extreme distance from Earth causes them to appear as fixed points of light.

Galaxies are too far away for astronomers to take true 3D measurements, through which we can estimate their size based on the motion of stars, which is also true for less common spiral galaxies like the Milky Way.

Thus, the orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.

Learn more about stars, here:

https://brainly.com/question/29359578

#SPJ6

With the use of the formula, the pressure on the bottom of the pool due to the water is 29400 Pascal

Given that a swimming pool of width 9.0 m and length 12.0 m is filled with water to a depth of 3.0 m.

Volume = Length x Width x Height

Volume = 9 x 12 x 3

Volume = 324 [tex]m^{3}[/tex]

Since 1 m^3 of water has a mass of 1000 kg,

Mass = 324 x 1000

mass = 324000 kg

To calculate the pressure on the bottom of the pool due to the water, let us use the pressure formula below

P = δgh

where

P = pressure

δ = density of the water = 1000 kg/[tex]m^{3}[/tex]

g = Acceleration due to gravity = 9.8 m/[tex]s^{2}[/tex]

h = height = 3m

Substitute all the parameters into the formula

P = 1000 x 9.8 x 3

P = 29400 Pascal

Therefore, the pressure on the bottom of the pool due to the water is 29400 Pascal

Learn more about Pressure here: https://brainly.com/question/25736513

Answer:c

Explanation:

To solve this, we must know each and every concept related to work. Therefore, the correct option is option C that is "an upward force is applied to an object to move it upward at a constant speed."

Work in physics is the energy delivered to or out of an item by applying force across a displacement. It is frequently expressed in its most basic form as the combination of displacement and force.

When a force is applied, it is said to produce positive work if it has a portion in the directions of the movement of the site of application. Work is done on a body is equivalent to an increase in the body's energy, because work transmits energy to the body. If, on the other hand, the force acting is in the opposite direction as the item's motion, the work is regarded negative, suggesting that energy is withdrawn from the object.

Therefore,  the correct option is option C that is "an upward force is applied to an object to move it upward at a constant speed."

To know more about work, here:

https://brainly.com/question/28727910

#SPJ2

Hi there!

Since the crate is being slid at a constant speed, the forces sum to 0 N. In this instance, the following forces occur in the axis of interest:

Wsinθ = downward acceleration along incline due to gravity (N)

Fκ = kinetic friction force along incline (N)

A = applied force (N)

The acceleration due to gravity and friction force act in the same direction, so:

Wsinθ + Fκ = A

Solve for sinθ using right triangle trigonometry:

sinθ = O/H = 3/6 = 0.5

Rearrange the equation for the force of kinetic friction and solve:

Fκ = A - 0.5W

Fκ = 30.4 - 20 = 10.4 N

Now, recall that:

Work = Force × displacement (W = F × d)

Since the box's displacement is in the same axis as the force but OPPOSITE direction, we must use:

W = Fdcosθ

Angle between displacement and friction force is 180°.

cos(180) = -1

Work done by friction = -Fd = -10.4(6) = -62.4 J

Answer:

3 bands

Explanation:

Basically, the Parametric EQ divides the audio spectrum into three bands, allowing you to enhance (or suppress) the level in that range.

The electric field created by Q at the position of q is [tex]\frac{F}{Q}[/tex].

The given parameters:

The electric field created by Q at the position of q is calculated as follows;

[tex]E = \frac{F}{Q} \\\\[/tex]

where;

Thus, the electric field created by Q at the position of q is [tex]\frac{F}{Q}[/tex].

Learn more about electric field here: https://brainly.com/question/14372078

Answer: rolling friction

Explanation: I think it is the answer

Answer:

I think A

Explanation:

Answer:435 Representatives

Explanation:The lower chamber of Congress, in which the number of representatives per state is determined by the state's population, with 435 Representatives total. Members of the House of Representatives serve two-year terms, so they are up for reelection every two years.