When a solute is dissolved in water, it forms……

Answer:

Haematology is the specialty important for the diagnosis and management of a wide range of benign and malignant disorders of the red and white blood cells, platelets and the coagulation system in adults and children.

Answer:

The atomic mass of this element would be 12 amu

Explanation:

The subatomic particles provide several bits of information about a given element.

The number of protons is equal to the atomic number of the element. For this element having 6 protons makes the atomic number 6 and makes the element Carbon.

The number of protons plus the number of neutrons equals the atomic mass of the element based upon atomic mass units (amus)

For this element 6 protons and 6 neutrons combine to make an atomic mass of 12 amus.

Lastly, the values of protons and electrons tell whether the atom is an ion or neutral. When protons equal electrons the atom is neutral. When protons are greater than neutrons the atom is a positive charge or cation. When the protons are less than the electrons the atom is a negative charge or anion. For this example the Carbon atom has 6 protons and 6 electrons making it neutral.

Answer:

Sorry but I know only what ksf stand for

Explanation:

Ksf stand for solubility product constant

Answer:

ksp stands for solubility product constant .

kf stands for molal freezing point depression constant ..

Explanation:

KSP = The solubility product constant, Ksp​, is the equilibrium constant for a solid substance dissolving in an aqueous solution. It represents the level at which a solute dissolves in solution. The more soluble a substance is, the higher the Ksp value it has .

KF = Kf is a constant for a given solvent. Kf is called the molal freezing point depression constant and represents how many degrees the freezing point of the solvent will change when 1.00 mole of a nonvolatile nonionizing (nondissociating) solute dissolves in one kilogram of solvent.

Answer:

water, when the metastable state is reached, is cooled below the zero temperature. It freezes abruptly. this is called metastable. They are not at equilibrium per se; as at negative temperatures the only equilibrium state of water is ice.

Explanation:

Answer:

50.0 moles C02

Explanation:

First write down the CORRECTLY balanced equation. NOTE: The equation you provide is incorrect.

2C2H2(g) + 5O2(g) ==> 4CO2(g) + 2H2O(g)  CORRECT EQUATION

Next, look at the stoichiometric ratio of C2H2 to CO2.  You can see it is 2 moles C2H2 produces 4 moles CO2.

Thus, 25.0 moles C2H2 x 4 moles CO2/2 moles C2H4 = 50.0 moles CO2

the mass percent of sugar in this solution is 46%.

Answer:

Solution given:

mass of solute=34.5g

mass of solvent=75g

mass percent=[tex]\frac{mass\:of\:solute}{mass\:of \:solvent}*100\%[/tex]

=[tex]\bold{\frac{34.5}{75.0}*100\%=46\%}[/tex]

We know that,

[tex]mass \: solute = \frac{mass \: of \: solute}{mass \: of \: solvent} [/tex]×100

[tex] \frac{34.5}{75.0} = 0.46[/tex]

hope it helps..

Answer: The thermal energy that would be released by 276.0g of sodium acetate trihydrate is 71.8kJ.

Explanation:

Supercooling is the process of lowering the temperature a liquid below its freezing point, without it becoming solid. A liquid below its freezing point will crystallize in the presence of a seed crystal because it serves as a structure for formation of crystals. From the question,

The given mass of sodium acetate trihydrate

(CH3COONa.3H2O)= 276.0g

Molar mass of sodium acetate

trihydrate= 136.08g/mol

Thermal heat of fusion of sodium acetate

trihydrate = 35.9 kJ/mol

From the given mass the number of moles present= 276.0/ 136.08

= 2.0moles

Therefore the heat (thermal) energy of the given mass of sodium acetate

trihydrate = 2.0 × 35.9

= 71.8kJ

Therefore, upon addition of a small seed crystal, the solution temperature increases as sodium acetate trihydrate crystallizes.

Nitrogen Dioxide

Carbon Monoxide

Iron (II) Oxide

Aluminum Oxide

DiPhosphorus Monoxide

Answer:

acetone, (CH3)2CO cyclohexane are the compound that possesses a permanent dipole

Explanation:

Permanent dipole describes the partial charge separation that can occur within a molecule along with the bond dat form between 2 different atoms

Answer:

"[tex]6.7\times 10^{-4} \ atm[/tex]" is the right answer.

Explanation:

Given:

Partial pressure of [tex]N_2[/tex],

= 0.20 atm

Partial pressure of [tex]H_2[/tex],

= 0.15 atm

[tex]K_p = 1.5\times 10^3[/tex] at [tex]400^{\circ} C[/tex]

As we know,

⇒ [tex]K_p = \frac{pN_2\times pH_2^3}{pNH_3^2}[/tex]

By putting the values, we get

    [tex]1.5\times 10^3=\frac{0.20\times (0.15)^3}{pNH_3^2}[/tex]

        [tex]pNH_3^2 = \frac{0.000675}{1.5\times 10^3}[/tex]

                    [tex]=6.7\times 10^{-4} \ atm[/tex]

Answer:

с

Explanation:

the first quantum number of an electron gives the information about the energy level the electron is in

The information first quantum number of an electron give is the energy level the electron is in.

Quantum numbers is a set of symbols which gives idea about the position  of electron present inside an atom.

Hence first quantum number of electron gives ideal about the energy level.

To know more about quantum numbers, visit the below link:
https://brainly.com/question/11575590

Explanation:

here's the answer to your question

Answer:

Spontaneous processes are ones that occur quickly and have a low activation energy. - False -

Spontaneous processes always require an input of energy to overcome the activation energy, but always react quickly - False

Spontaneous processes can occur slowly, but always have a low activation- false

Spontaneous reactions can react slowly and can have a high activation energy - True

Spontaneous processes always react slowly and always have a high activation energy- False

Explanation:

A spontaneous reaction is reaction that proceeds on its own without us having to do a thing at all!

A spontaneous reaction may be fast or slow depending on the activation energy of the reaction. A spontaneous reaction having a high activation energy will be slow. However, if the spontaneous reaction has a low activation energy then it will be fast.

We have to note here that a spontaneous reaction proceeds without a prolonged input energy. Sometimes energy may be supplied to the reaction at the beginning for instance in the case of the combustion of hydrocarbons.

So, spontaneous processes are not necessarily fast. Some of them may have a very high activation energy such as in the rusting of iron hence they are slow.

Answer:

p'PCl3 =  6.8 torr

p'Cl2 =26.4 torr

p'PCl5 =223.4 torr

Explanation:

An equilibrium mixture of PCl5(g), PCl3(g), and Cl2(g) has partial pressures of 217.0 Torr, 13.2 Torr, and 13.2 Torr, respectively. A quantity of Cl2(g) is injected into the mixture, and the total pressure jumps to 263.0 Torr at the moment of mixing. The system then re-equilibrates. The chemical equation for this reaction is

PCl3(g) + Cl2(g) ---> PCl5(g)

Calculate the new partial pressures after equilibrium is reestablished. [in torr]

pPCl3

pCl2

pPCl5

Step 1: Data given

Partial pressure before adding chlorine gas:

Partial pressure of PCl5 = 217.0 torr

Partial pressureof PCl3 = 13.2 torr

Partial pressureof Cl2 = 13.2 torr

A quantity of Cl2(g) is injected into the mixture, and the total pressure jumps to 263.0 Torr at the moment of mixing

Step 2: The equation

PCl3(g)+Cl2(g) ⇔ PCl5(g)

Step 3: The expression of an equilibrium constant before adding chlorine gas

Kp = pPCl5 / (pPCl3 * pCl2)

Kp = 217.0 / (13.2 * 13.2)

Kp =  1.245

Step 4:  The expression of an equilibrium constant after adding chlorine gas

Partial pressure of PCl5 = 217.0 torr

Partial pressure of PCl3 = 13.2

Partial pressure of Cl2 = TO BE DETERMINED

Step 5: The total pressure of the system

Ptotal = pPCl5 + pPCl3 + pCl2

263.0 torr = 217.0 torr + 13.2 torr + pCl2

pCl2 = 263.0 - 217.0 -13.2 = 32.8 torr

Step 6: The initial pressure

The equation: PCl3(g)+Cl2(g) ⇔ PCl5(g)

pPCl3 = 13.2 torr

pCl2 = 32.8 torr

pPCl5 = 217.0 torr

Step 7: The pressure at the equilibrium

p'PCl3 = (13.2 -x) torr

p'Cl2 = (32.8 - x) torr

p'PCl5 = (217.0 + x) torr

Step 8: The equilibrium constant

'Kp =  p'PCl5 / (p'PCl3 * p'Cl2)

1.245 = (217.0+x) / ((13.2-x)(32.8-x)

x = 6.40 torr

p'PCl3 = 13.2 -6.40 = 6.8 torr

p'Cl2 = 32.8 - 6.40 =26.4 torr

p'PCl5 = 217.0 + x) 6.4 = 223.4 torr

Kc = [CH4]×[H2O] / [CO]×[H2]^3

Kc = 1.078×0.878 / (0.989×0.933^3)

Kc = 0.977

The numerical value of the equilibrium constant, Kc, for the given reaction is found to be 0.977.

The Equilibrium constant may be defined as the numerical value that significantly indicated the correlation between the amounts of products and reactants present at equilibrium in a reversible chemical reaction at a definite temperature.

According to the question, the reaction is as follows:

[tex]CO +3H_2[/tex] ↔ [tex]CH_4+ H_2O[/tex].

The equilibrium concentrations are 0.989 M, 0.993 M, 1.078 M and 0.878 M, respectively.

Now, the equilibrium constant is calculated by the following formula:

             =  1.078×0.878 / (0.989×0.93[tex]3^3[/tex]).

             = 0.9464/(0.989 × 0.8121)

             =  0.977.

Therefore, the numerical value of the equilibrium constant, Kc, for the given reaction is found to be 0.977.

To learn more about Equilibrium constant, refer to the link:

https://brainly.com/question/19340344

#SPJ2

Answer:

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s) + 4H+(aq) + 2e-

Explanation:

Step 1: Data given

The oxidation number of manganese ion (Mn2+ ) is +2

The oxidation number of manganese dioxide  is +(MnO2)4

This means the oxidation number from Mn will go from +2 to +4, since it's increased, this is an oxidation reaction

Mn2+(aq)  ⇒ MnO2(s)

We have to balance both sides. Mn is already the same. But on the right side we have O atoms. T obalance both sides we have to add O atoms to the left side. This by adding 2x H2O

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s)

Now the amount of O atoms is balanced, but we have H- atoms at the left side. To balance we have to add 4 H atoms to the right side

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s) + 4H+(aq)

Now the amount of atoms is balanced at both sides. We also have to check if the charge on both sides is the same.

Since the left side has a charge of +2, and right has a charge of +4, we have to add 2 electrons to balance this.

Mn2+(aq) + 2H2O(l)  ⇒ MnO2(s) + 4H+(aq) + 2e-

Answer:

a. Na(s); b. Al(s); c. Zn(s)

Explanation:

Let's consider the following redox reactions.

a. ZnCl₂ (aq) + 2 Na(s) → Zn(s) + 2 NaCl(aq)

Na is oxidized because its oxidation number increases from 0 to +1 (in NaCl) whereas Zn is reduced because its oxidation number decreases from 2+ (in ZnCl₂) to 0.

b. Al(s) + FeBr₃ (aq) → AlBr₃ (aq) + Fe(s)

Al is oxidized because its oxidation number increases from 0 to +3 (in AlBr₃) whereas Fe is reduced because its oxidation number decreases from 3+ (in FeBr₃) to 0.

c. FeSO₄ (aq) + Zn(s) → Fe(s) + ZnSO₄(aq)

Zn is oxidized because its oxidation number increases from 0 to +2 (in ZnSO₄) whereas Fe is reduced because its oxidation number decreases from 2+ (in FeSO₄) to 0.

Answer:

23

Explanation:

The half life of a radioactive isotope refers to the time taken for half of the number of original number of atoms present in the sample to decay.

The equation below gives the number of atoms present at time t

[tex]N=Noe^-kt[/tex]

N = Number of atoms present at time t

No = Number of atoms initially present

k = decay constant

t = time taken

Given that;

t1/2 = 0.693/k

where t1/2 = half life

k = 0.693/t1/2

k = 0.693/ 55.6 s

k = 0.0125 s-1

Substituting values;

N = 16,000 e^-0.0125(0)

N = 16,000 atoms

At 50 s

N = 16,000 e^-0.0125(50)

= 8564 atoms

At 100 s

N = 16,000 e^-0.0125(100)

= 4584 atoms

At 200 s

N = 16,000 e^-0.0125(200)

= 1313 atoms

https://brainly.com/question/2998270

Answer:

b. radicals form easily in the presence of chlorine radicals.

Explanation:

Chlorine radicals perform the first propagation step: because "radicals form easily in the presence of chlorine radicals."

This is because the first propagation step consumes a CHLORINE RADICAL while the second propagation step regenerates a CHLORINE RADICAL. In this way, a chain reaction occurs, whereby one CHLORINE RADICAL can ultimately cause thousands of molecules of methane to be converted into chloromethane with C12 present.

Hence, in this case, the correct answer is that "radicals form easily in the presence of chlorine radicals."

Answer: Options related to your question is missing below are the missing options

a. cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor.

b. cytochrome c is a two-electron acceptor, whereas QH2 is a one-electron donor.

c. cytochrome c is water soluble and operates between the inner and outer mitochondrial membranes

d. heart muscle has a high rate of oxidative metabolism, and therefore requires twice as much cytochrome c as QH2 for electron transfer to proceed normally.

e. two molecules of cytochrome c must first combine physically before they are catalytically active.

answer:

cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor. ( A )

Explanation:

The overall stoichiometry of the reaction requires 2 mol of cytochrome per mole of QH2 because a cytochrome is simply a one-electron acceptor while QH2 is not a one-electron donor ( i.e. it is a two-electron donor )

An electron donor in a reaction is considered a reducing agent because it donates its electrons to another compound thereby self oxidizing itself in the process.

Answer:

6CO2+6H2O+heat" C6H12O6+6O2

the best way to balance a chemical reaction is to start with balancing the hydrogen followed by the other elements then lastly oxygen.so in this case if you put a 6 in front of carbon dioxide,water and oxygen you will definitely balance it.cause at the first side you have 6 carbons similar to the product,12 oxygen similar to the product and 18 oxygen similar to the products.

I hope this helps

Answer:

Explanation:

I saw this after answering your other question on the same reaction.

To balance the chemical reaction, look at the reactants and products. As O is part of both products, focus on C and H instead.

On the products side, 1 C6H12O6 has 6 C and 12 H. So that requires the same numbers of C and H on the reactant side because of mass conservation.

That gives 6 CO2 and 6 H2O as the reactants. Counting the number of O in the reactants, there are 6*2 + 6 = 18 O. Subtracting the 6 O in C6H12O6, that leaves 12 O so there are 12/2 = 6 O2 in the products.

Combining the numbers above, the balanced equation is:

___6___ CO₂ + ___6___ H₂O + heat ↔ ___1___ C₆H₁₂O₆ + ___6___ O₂

Answer:

groups are based on how many electrons to become stable

Explanation:

Answer:

[tex]\gamma=1.125[/tex]

Explanation:

From the question we are told that:

Initial Heat [tex]Q_1=800kJ[/tex]

initial Temperature [tex]T_1=10.0K[/tex]

Final Heat [tex]Q_2=800kJ[/tex]

Final Temperature [tex]T_2=10.0K[/tex]

Generally the equation for Adiabatic constant is mathematically given by

[tex]\gamma=\frac{Cp}{Cv}[/tex]

Since

Equation for Heat [tex]dQ=nCdT[/tex]

Where

[tex]n_1=n_2\\\\T_1=T_2[/tex]

Therefore

[tex]Q_1=Cv\\\\Cv=800[/tex]

And

[tex]Cp=900[/tex]

Therefore

[tex]\gamma=\frac{900}{800}\\\\\gamma=\frac{9}{8}[/tex]

[tex]\gamma=1.125[/tex]

Answer:

The products will be favored at equilibrium.

Explanation:

The balanced chemical equation for the reaction is the following:

2 COF₂ (g) + ⇌ CO₂(g) + CF₄(g)

The reactant is COF₂ (left side) and the products are CO₂ and CF₄ (right side).

The equilibrium constant is given by the ratio between the partial pressures (P) of products and reactants, because they are in the gas phase. Thus, the expression of the equilibrium constant is the following:

[tex]Kp = \frac{P(CO_{2}) P(CF_{4}) }{P(COF_{2} )^{2} } = 2.2 x 10^{6}[/tex]

Since Kp>>>>1 ⇒ (P(CO₂) x P(CF₄)) > (P(COF₂))²

So, the partial pressures of the products (CO₂ and CF₄) are higher than the partial pressure of the reactant (COF₂).

Therefore, products will be favored at equilibrium at 298 K.

Answer:

Time is 2.2 seconds.

Explanation:

Time:

[tex]{ \boxed{ \bf{time = \frac{distance}{speed} }}}[/tex]

Substitute into the formula:

speed = 715 km/h = 198.61 m/s

[tex]{ \tt{time = \frac{435}{198.61} }} \\ { \tt{time = 2.2 \: seconds}}[/tex]

Answer:

[tex]error = 4.0 - 3.5 = 0.5 \\ \\ percent \: error = \frac{0.5}{3.5} \times 100 \\ \\ = 14.29\% [/tex]

Answer:

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)

Explanation:

Hydration is the process by which anhydrous CuSO4 acquires molecules of water of crystalization to form the pentahydrate.

The water of crystalization becomes attached go the crystals of the CuSO4 to form the hydrated salt.

Beginning with solid anhydrous CuSO4 we have;

CuSO4(s) + 5H2O(l) ----> CuSO4.5H2O(s)