Two 51 g blocks are held 30 cm above a table. As shown in the figure, one of them is just touching a 30-long spring. The blocks are released at the same time. The block on the left hits the table at exactly the same instant as the block on the right first comes to an instantaneous rest. What is the spring constant?

Answer:

Biosphere is the part of the earth where life exists.

Answer:

independent variable

Explanation:

Answer:

Three Types of Computer The Computer are classified into three main types:: • Analog Computers • Digital Computers • Hybrid Computers (Analog + Digital) Analog Computers:: Analog Computer measures “Physical Quantities” for example Temperature, Voltage, Pressure, and Electric Current.

Answer:

a)  W = - 6.825 J,  b) θ = 1.72 revolution

Explanation:

a) In this exercise the work of the friction force is negative and is equal to the variation of the kinetic energy of the particle

         W = ΔK

         W = K_f - K₀

          W = ½ m v_f² - ½ m v₀²

         W = ½ 0.325 (5.5² - 8.5²)

         W = - 6.825 J

b) find us the coefficient of friction

Let's use Newton's second law

            fr = μ N

y-axis (vertical)   N-W = 0

            fr = μ W

work is defined by

             W = F d

the distance traveled in a revolution is

             d₀ = 2π r

             W = μ mg d₀ = -6.825

            μ = [tex]\frac{ -6.825}{d_o \ mg}[/tex]

The total work as the object stops the final velocity is zero v_f = 0

         W = 0 - ½ m v₀²

          W = - ½ 0.325 8.5²

          W = - 11.74 J

           μ mg d = -11.74

we subtitle the friction coefficient value

           ( [tex]\frac{-6.8525 }{d_o mg}[/tex]) m g d = -11.74

               6.825  [tex]\frac{d}{d_o}[/tex] = 11.74

               d = 11.74/6.825  d₀

               d = 1.7201  2π 0.400

               d = 4.32 m

this is the total distance traveled, the distance and the angle are related

              θ = d / r

              θ = 4.32 / 0.40

              θ = 10.808 rad

we reduce to revolutions

              θ = 10.808 rad (1rev / 2π rad)

              θ = 1.72 revolution

The question is incomplete. The complete question is :

Two loudspeakers are placed 1.8 m apart. They play tones of equal frequency. If you stand 3.0 m in front of the speakers, and exactly between them, you hear a minimum of intensity. As you walk parallel to the plane of the speakers, staying 3.0 m away, the sound intensity increases until reaching a maximum when you are directly in front of one of the speakers. The speed of sound in the room is 340 m/s.

What is the frequency of the sound?

Solution :

Given :

The distance between the two loud speakers, [tex]d = 1.8 \ m[/tex]

The speaker are in phase and so the path difference is zero constructive interference occurs.

At the point [tex]D[/tex], the speakers are out of phase and so the path difference is [tex]$=\frac{\lambda}{2}$[/tex]

Therefore,

[tex]$AD-BD = \frac{\lambda}{2}[/tex]

[tex]$\sqrt{(1.8)^2+(3)^2-3} =\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2 \times 0.4985$[/tex]

[tex]$\lambda = 0.99714 \ m$[/tex]

Thus the frequency is :

[tex]$f=\frac{v}{\lambda}$[/tex]

[tex]$f=\frac{340}{0.99714}$[/tex]

[tex]f=340.9744[/tex] Hz

Answer:

approaches infinity

Explanation:

There are two momentums, the classical momentum which is equal to the product of mass and velocity, and the relativistic momentum, the one we should look at when we work with high speeds, and this happens because massive objects have a speed limit, in this case, we are approaching the speed of light, so we need to work with the relativistic momentum instead of the classical momentum.

The relativistic momentum can be written as:

[tex]p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

where

u = speed of the object relative to the observer, in this case we have that u tends to c, the speed of light.

m = mass of the object

c = speed of light.

So, as u tends to c, we will have:

[tex]\lim_{u \to c} p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

Notice that when u tends to c, the denominator on the first term tends to zero, thus, the relativistic momentum of the object will tend to infinity.

Then the correct option is infinity, as the particle speed approaches the speed of light, the relativistic momentum of the particle tends to infinity.

Answer:

R = 0.0015Ω

Explanation:

The formula for calculating the resistivity of a material is expressed as;

ρ = RA/l

R is the resistance

ρ is the resistivity

A is the area of the wire

l is the length of the wire

Given

l = 85cm = 0.85m

A = πr²

A = 3.14*0.0018²

A = 0.0000101736m²

ρ = 1.75 × 10-8Ωm.

Substitute into the formula

1.75 × 10-8 = 0.0000101736R/0.85

1.4875× 10-8 = 0.0000101736R

R = 1.4875× 10-8/0.0000101736

R = 0.0015Ω

Answer:

C . Magnetic dipoles is the correct

Answer:

b). movement of charged particles.

Explanation:

These charges create the nagnetic dipoles.

Answer:

 emf = 312 V

Explanation:

In this exercise the electromotive force is asked, for which we must use Faraday's law

           emf =  [tex]- N \frac{d \Phi }{dt}[/tex]- N dfi / dt

           Ф = B. A = B A cos θ

bold type indicates vectors.

They indicate that the magnetic field is constant, the angle between the normal to the area and the magnetic field is parallel by local cosine values ​​1

It also indicates that the area is reduced from  a₀ = 0.325 me² to a_f = 0 in a time interval of ΔT = 0.100 s, suppose that this reduction is linear

            emf = -N B [tex]\frac{dA}{dT}[/tex]

            emf = - N B (A_f - A₀) / Dt

we calculate

           emf = - 60 1.60 (0 - 0.325) /0.100

           emf = 312 V

The direction of this voltage is exiting the page

Answer:

Explanation:

a)     Fx = F cos (θ)

           = (200) cos(60)

           = 100 N

b)     FR = ma

       Fx + Ff = ma

      100 + Ff = (50)(1,5)

       Ff     = 75 - 100

               =  -25 N

c)    Fy = F sin θ

           = (200) sin(60)

           = 173,2 N

Answer:

B) The same as the momentum change of the heavier fragment.

Explanation:

Since the initial momentum of the system is zero, we have

0 = p + p' where p = momentum of lighter fragment = mv where m = mass of lighter fragment, v = velocity of lighter fragment, and p' = momentum of heavier fragment = m'v' where m = mass of heavier fragment = 25m and v = velocity of heavier fragment.

0 = p + p'

p = -p'

Since the initial momentum of each fragment is zero, the momentum change of lighter fragment Δp = final momentum - initial momentum = p - 0  = p

The momentum change of heavier fragment Δp' = final momentum - initial momentum = p' - 0 = p' - 0 = p'

Since p = -p' and Δp = p and Δp' = -p = p ⇒ Δp = Δp'

So, the magnitude of the momentum change of the lighter fragment is the same as that of the heavier fragment.  

So, option B is the answer

Answer:

Problem solving

hope this helps :)

Solution :

Let [tex]$d_1=\frac{5.5}{2}[/tex]

          = 2.75 m

[tex]d_2 = 0.21 \ m[/tex]

And [tex]$d=|d_1-d_2|$[/tex]

       [tex]$d=(d_1+d_2) - (d_1-d_2)$[/tex]

       [tex]$d=(2.75+0.21) - (2.75-0.21)$[/tex]

       [tex]$d = 2.96-2.54$[/tex]

       [tex]d = 0.42 \ m[/tex]

a). At minimum,

[tex]$d=\frac{\lambda}{2}$[/tex]

[tex]$\lambda = 2d$[/tex]

  = 2 x 0.42

  = 0.84 m

Frequency, [tex]$\nu = \frac{v}{\lambda}$[/tex]

                      [tex]$=\frac{340}{0.84}$[/tex]

                      = 404.76 Hz

Therefore, the frequency of he sound, [tex]$\nu$[/tex] = 404.76 Hz

b). At maximum, λ = d = 0.42 m

Therefore, the frequency, [tex]$\nu = \frac{v}{\lambda}[/tex]

                                             [tex]$=\frac{350}{0.42}$[/tex]

                                             = 809.52 Hz

Answer:

the answer is 49000 joules at the maximum height

Explanation:

we know the mass (50kg)

we know the acceleration due to gravity(9.8m/s²)

we know the height too(maximum height meaning the 50th step so we multiply 50 with 20cm as each step is 20 cm and we get 1000 cm, convert to m it is 100 m

the formula is potential energy=mgh

m for mass

g for acceleration due to gravity

h for height

multiply them

50x9.8x100

we get 49000

the unit of potential energy is joules so the answer is

49000 joules

Answer:

49000 joules

Explanation:

hope it helpss

Answer:

233.33°F

Explanation:

(385K - 273.15) * 9/5 + 32 = 233.33°F

science is all about the world around us

Answer:

a)   R₁ = 14.1 Ω,   b)  R₂ =  19.9 Ω

Explanation:

For this exercise we must use ohm's law remembering that in a series circuit the equivalent resistance is the sum of the resistances

all resistors connected

           V = i (R₁ + R₂)

with R₁ connected

           V = (i + 0.5) R₁

with R₂ connected

           V = (i + 0.25) R₂

We have a system of three equations with three unknowns for which we can solve it

We substitute the last two equations in the first

           V = i ( [tex]\frac{V}{ i+0.5} + \frac{V}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{1}{i+0.5} + \frac{1}{i+0.25}[/tex] )

           1 = i ( [tex]\frac{i+0.5+i+0.25}{(i+0.5) \ ( i+0.25) }[/tex] ) =  [tex]\frac{i^2 + 0.75i}{i^2 + 0.75 i + 0.125}[/tex]

           i² + 0.75 i + 0.125 = 2i² + 0.75 i

           i² - 0.125 = 0

           i = √0.125

           i = 0.35355 A

with the second equation we look for R1

          R₁ = [tex]\frac{V}{i+0.5}[/tex]

          R₁ = 12 /( 0.35355 +0.5)

          R₁ = 14.1 Ω

with the third equation we look for R2

          R₂ = [tex]\frac{V}{i+0.25}[/tex]

          R₂ =[tex]\frac{12}{0.35355+0.25}[/tex]

          R₂ =  19.9 Ω

Answer:

The correct answer is "[tex](0,300\times 10^{-3} \ N/C)[/tex]".

Explanation:

The given problem seems to be incomplete. Please find the attachment of the complete query.

According to the question,

At point A, we have

⇒ [tex]E_x = \frac{k q_1}{d_1^2} Cos \theta_1 - \frac{k q_2}{d_2^2} Cos \theta_2[/tex]

or,

⇒ [tex]E_x = 9\times 10^9\times [\frac{6\times 10^{-9}}{15^2}\times \frac{9}{15}-\frac{8\times 10^{-9}}{20^2}\times \frac{16}{20} ][/tex]

         [tex]=0[/tex]

and,

⇒ [tex]E_y = \frac{kq_1}{d_1^2}Sin \theta_1 +\frac{kq_2}{d_2^2}Sin \theta_2[/tex]

or,

⇒ [tex]E_y = 9\times 10^9\times [\frac{6\times 10^{-9}\times 12}{15^2\times 15}+ \frac{8\times 10^{-9}\times 12}{20^2\times 20} ][/tex]

         [tex]=0.3 \ N/C[/tex]

Answer:

Standard units are commonly used units of measurement, which help us measure length, height, weight, temperature, mass and more. These units are standardised, which means that everyone gets the same understanding of the size, weight and other properties of objects and things.

Explanation:

Answer:

the answer should be b) 3.8 x 10-5 v

Answer:

1. The image is real

2. 5.85

3. h' = 3.05 mm

4. The image is upright

Explanation:

1. Start with the first lens and apply 1/f = 1/p + 1/q

1/5.01 = 1/13.7 + 1/q

q = 7.90 cm

Since that distance is behind the first lens, and the second lens is 62.5 cm behind the first lens, that distance is 62.5 - 7.90 = 54.6 cm in front of the second lens, and becomes the object for that lens, thus,

1/25.9 = 1/54.6 + 1/q

q = 49.3 cm behind the second lens

Using that information, since q is positive, the image is real

2. Also, using that information, you have the second answer, which is 49.3 cm

The height can be found from the two magnifications.

m = -q/p

m1 = -7.9/13.7 = -.577

m2 = -49.3/54.6 = -.903

Net m = (-.577)(-.903) = .521

Then, m = h'/h

.521 = h'/5.85

3. h' = 3.05 mm

4. For the fourth answer, since the overall magnification is positive, the final image is upright

Answer:

Octabromine tetraphosphide

Explanation:

This compound has in its formula:

- Eight bromines

- Four phosphorous

8 → octa prefix

4 → tetra prefix

Right answer is Octabromine tetraphosphide

This question deals with projectile motion, which is a motion on both the x-axis and y-axis, simultaneously. The total time of flight of the projectile trajectory is given, while the time to reach the highest point of the projectile is required to be found.

The projectile will reach the highest point in "3 seconds".

The total time of flight of a projectile is the time during which the projectile remains in the air. For a projectile motion that ends up on the same horizontal level, from where it started, the time to reach the highest point, is equal to half of the total time of flight.

In other words, the projectile motion takes the same time, to go from the starting level to the highest point (i.e upward motion), as the time taken to reach the starting level from the highest point (i.e downward motion).

[tex]t = \frac{1}{2}T[/tex]

where,

t = time to reach the highest point = ?

T = total time of flight = 6 seconds

Therefore,

[tex]t - \frac{1}{2}(6\ seconds)[/tex]

t = 3 seconds

Learn more about the projectile motion here:

https://brainly.com/question/20689870?referrer=searchResults

Answer:

Explanation:

The formula for angular momentum is

L = mvr where L is the angular momentum, m is the mass of the object, v is the velocity of the object, and r is the radius of the object. The problem we have that prevents us from just throwing those numbers in there is that mass has to be in kg and it's not, and radius has to be in meters and it's not.

Changing the mass to kg:

750 g = .750 kg

Changing the radius to m:

35 cm = .35 m

Now we can fill in the variables with their respective values:

L = .750(10.0)(.35) gives us

[tex]L=2.625\frac{kg*m^2}{s}[/tex]

Answer:

40 because if it is the same weight then there is no weight to make the ride slower so it 40

Explanation:

Answer:

the tendency of electron dipole moments to align with an applied magnetic field

Explanation:

Paramagnetism has to do with possession of unpaired electrons. Substances that possess unpaired electrons are said to be paramagnetic.

When an external magnetic field is applied to a paramagnetic substance, the magnetic field causes the electrons spins of the paramagnetic substance to align parallel to the field,which leads to a net attraction.

Hence, paramagnetism is closely associated with the tendency of electron dipole moments to align with an applied magnetic field.

Answer:

The answer would be D), if the decay is beta negative.

Explanation:

Thorium-232 goes through alpha decay:

Thorium-232 --> Helium-4 + Radium-228

Radium-228 then can undergo beta positive or beta negative decay:

Beta positive = Radium-228 --> Electron + Francium-228

Beta negative = Radium-228 --> Positron + Actinium-228

Therefore, the isotope that is created is Actinium-228

Answer:

answer

Explanation:

it is the answer which was presented in the year

Answer:

Explanation:

That is an amazing fact.

The minus sign is what you have to pay attention to. The earth has a mass of 100 times that of Saturn. As someone on here once noted, Saturn has such a low density that it would float in water.

The answer is D