The pressure of the gas = 40 atm
Further explanationGiven
200 ml container
P = 2 atm
final volume = 10 ml
Required
Final pressure
Solution
Boyle's Law
At a fixed temperature, the gas volume is inversely proportional to the pressure applied
[tex]\tt \rm p_1V_1=p_2.V_2\\\\\dfrac{p_1}{p_2}=\dfrac{V_2}{V_1}[/tex]
Input the value :
P₂ = P₁V₁/V₂
P₂ = 2 x 200 / 10
P₂ = 40 atm
1. Ammonia gas occupies a volume of 450. ml at a pressure of 720, mm Hg. What
volume will it occupy at standard pressure?
Answer:
720+450 = 1170 it's 1170
426.32mL (rounded)
The formula for finding V2 is P1 • V1/P2 and since standard pressure (1atm) is equal to 760 P2 would be 760.
720mmHg • (450mL/760mmHg) = 426.32mL
One mole of silver has a mass of 107.9 grams. Approximately how many atoms of silver are present in one mole of silver?
A) 107 atoms
B) 108 atoms
C) 6 × 1023 atoms
D) 53 × 1023 atoms
Answer C) 6 × 1023 atom
The number of silver atoms present in one mole of silver is 6.0 × 10²³ atoms. The correct option is C) 6 × 1023 atoms
StoichiometryFrom the question, we are to determine the number of silver atoms present in one mole of silver.
From the formula,
Number of atoms = Number of moles × Avogadro's constant
Number of atoms = 1 × 6.022 × 10²³
Number of atoms = 6.022 × 10²³
Number of atoms ≅ 6.0 × 10²³ atoms
Hence, the number of silver atoms present in one mole of silver is 6.0 × 10²³ atoms. The correct option is C) 6 × 1023 atoms
Learn more on Stoichiometry here: https://brainly.com/question/16505596
Will these groups of elements form ionic or molecular compounds? sodium and Iodine 
Answer:
Ionic
Explanation:
Answer:
carbon and hydrogen are molecular
Explanation:
Substance X is extremely acidic. Substance Y is extremely basic. What would be formed if substance X and Y were mixed together?
Answer:
salt will form bcz when acids reacts with base then it forms salts . and this reaction is called neutralization reaction
This coffee pot has a temperature of 23 degrees. The coffee cup was put in the microwave and is now 45 degrees. Which one has a greater thermal energy?
Answer:
. Which one has a greater thermal energy?
the coffee cup
I need help with number 5 pleaseee
Answer: the answer is d
Explanation:
Decane + Dioxygen = Carbon Dioxide + Water
Reaction Type
Combustion
HELPPPPPPPPPPP HELPPPPP HELP
Answer:
calcium chloride and water
Explanation:
the reaction absorbed energy which means endothermic
Why did Mendeleyev try to reorganize the periodic table?
Why is it that the decomposition of nitroglycerin can result in so
much more volume than the decomposition of sodium azide?
Answer:
with the molecular formula C3H5(ONO2)3, has a high nitrogen content (18.5 percent) and contains sufficient oxygen atoms to oxidize the carbon and hydrogen atoms while nitrogen is being liberated, so that it is one of the most powerful explosives known.
Explanation:
NTG reduces preload via venous dilation, and achieves modest afterload reduction via arterial dilation. These effects result in decreased myocardial oxygen demand. In addition, NTG induces coronary vasodilation, thereby increasing oxygen delivery.
The decomposition of nitroglycerin can result in so much more volume than the decomposition of sodium azide nitroglycerin contains a lot of nitrogen (18.5%) and has enough oxygen atoms.
What is volume?A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.
The total volume much a container is usually thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold. The decomposition of nitroglycerin can result in so much more volume than the decomposition of sodium azide nitroglycerin contains a lot of nitrogen (18.5%) and has enough oxygen atoms for the nitrogen to be liberated while also oxidising the hydrogen and carbon atoms.
Therefore, the decomposition of nitroglycerin can result in so much more volume than the decomposition of sodium azide nitroglycerin contains a lot of nitrogen (18.5%) and has enough oxygen atoms.
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ2
Something that is made out of natural resources for human use is called
Answer: Man Made Resources?
Explanation: Its when humans create their own things.
The movement of broken down pieces of rock from one place to another is called
A. Deposition
B. Erosion
C. Weathering
D. Sediment
Answer:
The answer I believe is B. Erosion
Explanation:
Just sounds better than all the other choices.
Answer:
erosion b
Explanation:
it breaks down the rocks i remembered this in 4th grade :)
What type of reaction is the following?
1 Mg(s) + 2 HCl(aq) → 1 MgCl2 (aq) + 1 H2 (9)
O Combustion
O Decomposition
O Double Replacement
O Neutralization
O Single Replacement
O Synthesis
Single Replacement
Further explanationGiven
Reaction
Mg(s) + 2 HCl(aq) → MgCl2 (aq) + H2 (g)
Required
Type of reaction
Solution
A single replacement reaction is a chemical reaction in which one element replaces the other elements of a compound to produce new elements and compounds
General formula :
A + BC ⇒ AC + B
Not all of these reactions can occur. We can use the activity series(the Volta series)
The more left the position of a metal in the series, the more reactive metal (easy to release electrons, the stronger the reductor)
How many moles of solute are in 250 mL of 2.0 M CaCl2? How many grams of CaCl2 is
this?
Answer:The solution contains 0.50 mol or 55 g of CaCl2 . You know there are 2.0 mol of CaCl2 in 1 L of solution. (40.08 + 2 × 35.45) g=(40.08 + 70.90)
g=110.98 g
Explanation:
My I please have brainliest
110.98 grams of CaCl₂ is there present in 2.0 M CaC₂.
What is calcium chloride?Calcium chloride is made up of calcium and chloride.
Given, that the solution contain 250 mL of 2.0 M CaCl2
You know there are 2.0 mol of CaCl2 in 1 L of solution.
(40.08 + 2 × 35.45) g
= (40.08 + 70.90)
=110.98 g
Thus, 110.98 grams of CaCl₂ is there present in 2.0 M CaC₂.
Learn more about calcium chloride
https://brainly.com/question/15296925
#SPJ2
WILL GIVE BRAINLIEST
Select all the correct answers.
Which of these are examples of mixing and separating?
removing seed casings from grains
a soda bottle bubbling when it is opened
a bright copper statue turning green from weathering
removing salt from seawater
water decomposing to oxygen and hydrogen
Answer:
Removing seed casings: separatingSoda bottle bubbling when opened: mixing as before it was opened nothing was happening but as it came in contact with atmosphere it started to bubble.
Bright copper statue turning green from weathering: mixing as all vapors and gases in atmosphere combined with copper of that statue they started to change color of statue
Removing salt from seawater: obviously removing as one component Water decomposing: obviously separating as it's constituent elements are removed from compound and converted into individual elements
Do liquids have kinetic energy? Yes or no.
Answer:
YESSIR
Explanation:
Scientists often need a catalyst to start a chemical reaction. They need to apply heat, acids, or other materials to jump-start the experiment.
Which phrase is the best definition of catalyst?
A. something hot
b. something acidic
c. something that triggers
d.something that is scientific
Answer:
something that triggers
Explanation:
a catalyst helps move a reaction along
A catalyst shows some specificity in its action. It speeds up only a spontaneous reaction. The best definition of catalyst is something that triggers. The correct option is C.
What is a catalyst?A substance which increases the rate of a chemical reaction without itself undergoing any permanent change chemically or quantitatively is defined as the catalyst and the phenomenon is called catalysis.
It is believed that a catalyst actually participates in the chemical reaction that is speeds up. It forms temporary bonds with the reactants yielding an intermediate activated complex.
A typical example of catalyst is iron (Fe) which is used in the Haber process for the manufacture of ammonia. The catalyst is recovered unchanged in amount and chemical composition at the end of the reaction.
In most cases, a small amount of a catalyst can speed up reaction between large amounts of reactants. A catalyst shows maximum efficiency at optimum temperature.
Thus the correct option is C.
To know more about catalyst, visit;
https://brainly.com/question/1565029
#SPJ6
18. What is the molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach
Answer:
0,1276 M
Explanation:
Molair mass of NaOCl = 74,44 g/mol
You have 9,5 g/L.
You need to calculate with the molair mass, how many moles 9,5 g are:
9,5 g / 74,44 g/mol = 0,1276 mol
0,1276 mol / 1 L = 0,1276 M
The molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach is mathematically given as
M= 0.1276 M
What is the molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach?Generally, the equation for the Molar mass is mathematically given as
M=m/(g/mol)
Therefore
M=9,5 g / 74,44 g/mol
M= 0,1276 mol
Hence
M= 0.1276 M
In conclusion, the molarity
M= 0.1276 M
Read more about Molarity
https://brainly.com/question/9149034
#SPJ2
What is the sequence of coefficients that will balance the following decomposition reaction of dihydrogen monosulfide? H₂S ----> H₂ + S₈
8 S
In this case you must start balancing the sulfur to have 8 on each side of the reaction. So:
Answer:
Explanation:
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
Then, you must balance the chemical equation. For that, you must first look at the subscripts next to each atom to find the number of atoms in the equation. If the same atom appears in more than one molecule, you must add its amounts.
The coefficients located in front of each molecule indicate the amount of each molecule for the reaction. This coefficient can be modified to balance the equation, just as you should never alter the subscripts.
By multiplying the coefficient mentioned by the subscript, you get the amount of each element present in the reaction.
Then, taking into account all of the above, you can determine the amount of elements on each side of the equation:
Left side: 2 H and 1 S
Right side: 2 H and 8 S
In this case you must start balancing the sulfur to have 8 on each side of the reaction. So:
8 H₂S → H₂ + S₈
Now the amount of elements on each side of the equation:
Left side: 16 H and 8
Right side: 2 H and 8 S
Now you need to start balancing the hydrogen to get the same amount from each side of the reaction. So:
8 H₂S → 8 H₂ + S₈
Now the amount of elements on each side of the equation:
Left side: 16 H and 8
Right side: 16 H and 8 S
The balanced reaction is:
8 H₂S → 8 H₂ + S₈
How many atoms are found in a 15.5 g sample of bismuth?
Answer:
4.47 x 10²² atoms
Explanation:
Given parameters:
Mass of Bismuth = 15.5g
Unknown:
Number of atoms = ?
Solution:
To find the number atoms, first solve for the number of moles in this element first.
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Number of moles = [tex]\frac{15.5}{209}[/tex] = 0.074mole
So:
1 mole of a substance contains 6.02 x 10²³ atoms
0.074 mole of Bismuth will contain 0.074 x 6.02 x 10²³ atoms
= 4.47 x 10²² atoms
Solve the equation.
3 - y = 13
y =
Answer:
First we isolate y by doing - 3
-y = 10
Explanation:
-10 since 3- (-10) is actually 3 + 10 which is 13
Question 5
Which of the following is not an example of mutualism?
Calculate the [H⁺] if the [OH⁻] is 1.0 × 10⁻⁵ M.
Answer:
ithink it is 9.0
Explanation:
PLEASE ANSWER ASAP (WILL GIVE BRAINLIEST)
What do we call the invisible force exerted by magnets?
A. Magnetic force
B. Electromagnetic force
C. Electric force
D. Applied force
Answer:
Magnetic Forceeeeeeeeeee
4. How much water would be needed to dilute at 750 ml solution of 2.8M HCl to a 1.0 M solution?
5. If 550 mL of a 3.50 M KCl solution is left out to evaporate until the volume is 275 mL, what would the
new Molarity be?
6. Extra Credit: A solution of H,SO, has a molarity of 0.14 mol/L in 750 mL. If 250 mL of water is added:
a. What is the new molarity of the solution?
Three questions in 1 less see how good Brainly really is
Please helllpppp meeee
If you took a spoonful of tea out of the cup, which would be more painful if it spilled on you? *
Write the balanced equation for : potassium chlorite decomposing to potassium chloride and oxygen . (use —> for the arrow)
Answer: 2 KCIO3(s) + heat —> KCI (s) + 3 O2(g)
Explanation:
why does the d block start in the fourth row of the periodic table
Answer:
Why does D-block start on the fourth row of the periodic table?
Explanation:
The require more energy to reach 3d than 4s, and they fill up 4p before 4d, and so forth. ... The energy is lower for 6s than 4f, and 4f and 5f are lower in energy than the final D level.
Which type of model is a way of imagining how something works?
Answer:
mental model is an explanation of someone's thought process about how something works in the real world. It is a representation of the surrounding world, the relationships between its various parts and a person's intuitive perception about his or her own acts and their consequences. Mental models can help shape behaviour and set an approach to solving problems (similar to a personal algorithm) and doing tasks.
:)
How many atoms are in 4.3 moles of lithium?
Write the formula: carbon hexabromide
Answer: C2Br6
Explanation:
