Engineering College

Rigid bar ABC is supported by three symmetrically-positioned vertical rods, which are initially unstrained. After load P is applied, the normal strain in rods (2) is 0.0010 mm/mm. Determine the normal strain in rod (1) if there is a gap of 1.0 mm in the connection between rod (1) and the rigid bar at B. Report the strain in mm/mm

Answers

Answer 1

Answer:

The answer is below

Explanation:

The lengths of the rods are not given.

Let us assume the length of rod 1 = 1500 mm and the length of rod 2 = 800 mm

Solution:

The normal strain is defined as the change in member length δ divided by the initial member length L. The normal strain (ε) is:

ε = δ / L

δ = εL

For rod 1:

[tex]\delta_2=\epsilon_2 L_2\\\\\delta_2=0.0010\ mm/mm*1500\ mm=1.5\ mm[/tex]

The axial elongation of rod 2 is 1.5 mm. Since rigid bar ABC is attached to rod 2, the rigid bar move down by same amount.

The rigid bar moves down 1.8 mm but rods 1 will not be stretched by this amount. Because there is a gap between rod (1) and the rigid bar at B, the first deflection of 1 mm would not cause an elongation in rod 1. Therefore, the elongation in rods (1) is:

[tex]\delta_1=1.5\ mm-1\ mm=0.5\ mm[/tex]

The normal strain in rod 1 is:

[tex]\epsilon_1=\frac{\delta_1}{L_1} =\frac{0.5\ mm}{800\ mm} \\\\\epsilon_1=0.000625\ mm/mm[/tex]

Related Questions

Draw a FBD of the beam with reactions at A & B. A is a pin, B is a roller. Try to guess intuitively which way the vertical components of A & B are pointing. Do not show the 6 kN forces in your FBD. Only show the couple moment, or pure moment

Answers

Answer:

kindly check the drawing of the  FBD of the beam with reactions at A & B. A is a pin, B is a roller in the attached picture.

Explanation:

Without further ado, let's dive straight into the solution to the question above. From the diagram of the FBD of the beam with reactions at A & B it can be shown that the reaction moment is anticlockwise while the moment is clockwise.

The system is at equilibrium and the it does not matter where you place the couple (pure) moment.

The distance from A to C can either be equal or not. If AY = 2.15 kN and M = 25.8. Then, the distance between A and B = 25.8/2.15 = 12m.

Convenience items like liquid egg are a lot more expensive?
True
Or False

Answers

It’s true because convenience stores are more expensive so that means overall the items would be more expensive.

Answer:

True

Explanation:

It's just because of the processing

Assume that 50,000 yd3 of the soil from a local borrow pit in Rhode Island, with a water content of 13% and dry unit weight of 87 pcf, is to be delivered to a construction site for some repairs of highway in I-95. By the time it reaches the site, the water content is 9%. It will be compacted to a minimum of 90% of the modified Proctor maximum dry density. Determine the total amount of water (in pounds), that must be added to the soil to increase the moisture content to the optimum level. Assume a Gs

Answers

Answer:3000 yd3

Explanation:

so i got the 50000 divided it by 100 times that by 13 and got 4500 yd3

so now the soil is at 9 so i need to get the 4 percent back up so i yet again got 50000 yd3 and divided by 100 and times it by 9 to get 1500 yd3 to then minus my 1500 and 4500 yd3 and got 3000 yd3 i hope it is right.

2 Describe the four major disciplines of engineering and identify problems or projects that an engineer in each discipline might encounter. Chemical engineering Civil engineering . Electrical engineering Mechanical engineering

Answers

Answer: Starting of with Chemical Engineering something that they may encounter is a lack of adeptness man puissance. People that are working there are not much adept or having cognizance regarding to chemical industry. Something someone with a Civil engineering might encounter is the quandary of sustainable construction, and amendment construction site safety. To go on , something that Electrical engineering might encounter is a Non technical , Virtually an electrical engineer has to deal with an astronomical range of machines , control panels,instruments. For example you are working with circuit breakers,as anon as you’ll have expertise on any particular type of circuit breaker, there's a transmutation in trend and the CB you are working with is already obsolete. And last but no least , Something someone might encounter while doing Mechanical engineering is there toxic substances because their work environment is susceptible to fires, explosions, structural failures and equipment malfunctions.

Answer:

 Chemical engineering

Uses chemical processes to find new ways to produce goods. Making antibiotics, pesticides, safe clothes, and foods.

·         Civil engineering

Builds structures to try and make them efficient. Makes a tornado-proof house, explosion-proof bunker, or easily navigable subway system.

·         Electrical engineering

Develops the electrical components for things. Game systems, keyboards, projectors, or hard drives.  

·         Mechanical engineering

Mechanical engineers work with things with mechanical processes and moving parts. Drills, wheels, elevators, or cranes.  

·        

·    

·      

Consider a single crystal of some hypothetical metal that has an FCC crystal structure and is oriented such that a tensile stress is applied along a[102] direction. If slip occurs on a( 111) plane and in a [ 101] direction, compute the stress at which the crystal yields if its critical resolved shear stress is 12.76 MPa.
a. 13.96 MPa
b. 52.1 MPa
c. 0 MPa
d. 30.9 MPa
e. 3.1 MPa

Answers

I believe it’s B but I could be wrong

Calculate the percentage of recyclables in high socioeconomic localities.

Answers

Answer:

The percentage of recycling in high socioeconomic localities is 11.02%.

Explanation:

Since in high socioeconomic localities, 10% of paper is recycled, 12% of plastic, 1.7% of fabrics, 1.2% of rubbers, 0.9% of metals, 3.5% of glass, 33% of food wastes, 35% soil and 1.9% miscellaneous, to determine the average recycling percentage the following calculation must be performed:

(10 + 12 + 1.7 + 1.2 + 0.9 + 3.5 + 33 + 35 + 1.9) / 9 = X

99.2 / 9 = X

11.02 = X

Therefore, the percentage of recycling in high socioeconomic localities is 11.02%.

Who developed the process of blueprinting?
A.
Michelangelo Buonerotti
B.
Raphael Sanzio
C.
Sir John Herschel
D.
Vitruvius

Answers

Answer: C.) John Herschel

The answer is all income (&) expenses

Answers

Answer:

NICE

Explanation:

What is a kind of useful car?

Answers

Yes what he/she said a truck is a very useful car if you want to go to work with it many use it for that, it can vary many things:)

Consider one-dimensional heat conduction through a large plane wall with no heat generation that is perfectly insulated on one side and is subjected to convection and radiation on the other side. It is claimed that under steady conditions, the temperature in a plane wall must be uniform (the same everywhere). Is this claim reasonable

Answers

Answer:

YES, this claim reasonable

Explanation:

the temperature in a plane wall is uniform since no heat is penetrating into the large plane wall and therefore, there is no heat transfer from the wall under steady conditions,  

This condition will be met only when there are no temperature differences within the wall and the the outer surface temperature of the wall is equal to the temperature of its surrounding.

Therefore, Yes, this claim is reasonable

Rigid bar ACB is supported by an elastic cir-cular strut DC having an outer diameter of 15 in. and inner diameter of 14.4 in. The strut is made of steel with a modulus elasticity of load P 5kips5 E 5 29,000 ksi. Point is applied at B. Calculate the change in length of the circular strut DC. What is the vertical displacement of the rigid bar at point B

Answers

Answer:

The change in length of the circular strut DC = 0.0028 in.

The vertical displacement of the rigid bar at point B = 0.00378 in.

Explanation:

We have the following parameters or information in the question given above:

=> The outer diameter = 15 in., the inner diameter = 14.4 in., the modulus elasticity of E = 29,000 ksi, and the Point load P = 5kips.

The diagram showing the rigid bar ACB is supported by an elastic cir-cular strut DC  is given in  the attached picture below.

According to Newton's law of motion, it can be seen that the force on CD, that is FCD is equal and opposite to ACD. Hence, FCD = ACD.

Where FCD = p × [4 + 5] ÷ [sin Ф × 4].

kindly note that from the diagram sin Ф = 3/5, cos Ф = 4/5 and tan Ф = 3/4. Also p =5.

Hence, FCD =[ 5 × 9] ÷ [3/5 × 4] = 18.75 kip. So FCD = ACD.

The next thing here is to determine the area and length of CD, say the area of CD is G, thus, G = π/4 × [ 15² - 14.4²] = 13.854 in².

The lenght of CD is = √[4² + 3²] = √[16 + 9] = 5ft. Thus, 5 × 12 = 60in.

Hence, the change in length of the circular strut DC = [18.75 × 60] ÷ 13.854 × 29000 = 0.0028 in.

The vertical deflection of CD = 0.0028 × 3/5 = 0.00168 in.

We have that; 4 /CV = 9BV. Hence, BV = 9/4× CV.

(CV = vertical deflection of CD).

The vertical displacement of the rigid bar at point B = 9/ 4 × 0.00168 in = 0.00378 in.  

Time management is a learned behavior.
True
False

Answers

Answer:

true

Explanation:

The answer is True.
Other Questions
V2 - 15 = -2v Solve the Quadratic. What are the 2 solutions? TRUE OR FALSE: President Jackson believed that only educated men who owned land should vote. alan , bispah and chan share a sum of money alan gets 1/8 of the money bispah gets 1/2 of the money chan gets the rest of the money alan gets 2.50 workout how much bispah gets In addition to the price of the car, what are some costs of having an automobile? Take a few moments to reflect on the week. Write at least 50 words describing a concept, skill, or idea you learned about or discussed in one of your classes. How did learning this skill or idea influence your view of the world? How did it prepare you for the future? Do you think you will ever use that particular skill or perhaps a skill based on it? DDT is used to kill mosquito caterpillar that carries malaria but it affected the ecological balance and the whole food chain in natural ecosystem. houseflies died when they fed on the dead caterpillars. This in turn killed little lizards when they fed on dead houseflies. Finally, the cats that eat the dead lizards died of ddt poisoning. The effect was invasion of dwelling with more and more rats raiding the house for food and carrying the plague.Negative feedbackPositive feedbackOr neither help me please i do not understand 14. For each of the following people, write a sentence explaining why they are important toEuropean exploration:a. Prince Henry the Navigatorb. Christopher Columbusc. Vasco da Gamad. Ferdinand Magellan Two people apply for loans of the same amount. Due to differences in their credit scores, their payments differ by 572per month. How much more will the person with the lower credit score pay at the end of the 36-month loan. How was Greek culture able to spread so quickly during the Hellenistic Era? please help me out A. What is the total current of this circuit? B. What is the current at Lamp 1?C. What type of circuit is this?D. What equation rule do we follow to determine total current and currents at Lamp1 and R1 (Look at the equations above)E. What is the total resistance? plz help look at the image for the question I don't know how to do this math problem-A dare to tell my biggest secret *sob* I like my best friend 0-0 What element has 7 valence electrons and 4 electron shells PLEASE HELP WILL MARK BRANLIESTCaring for Coral Reefs Zachary Felton Coral reefs are amazing underwater worlds. They cover about 186,000 square miles of ocean floor. They mostly exist in the warmest parts of the world. This is because coral reefs develop in shallow, warm water, usually near Land and mostly in the tropics. Coral reefs prefer temperatures between 70 and 85 degrees Fahrenheit. This is why they are found off the coasts of Africa, India, Australia, and Brazil Coral reefs closest to us are found off the coast of Florida. Which is the BEST paraphrase of the paragraph from a source on coral reefs? A) Coral reefs are whole worlds underwater and they are warm and the closest to us is in Florida. Coral reefs are an important part of the ocean, covering 186,000 square miles, and they are usually in warm places, Coral reefs like shallow, warm water and are usually near the tropics. The closest coral reef to the United States is off the coast of Florida. B) o Coral reefs are amazing underwater worlds. They cover about 186,000 square miles of ocean floor. They mostly exist in the warmest parts of the world. This is because coral reefs develop in shallow, warm water, usually near land and mostly in the tropics. Coral reefs closest to us are found off the coast of Florida,C)Coral reefs are amazing underwater worlds.They cover about 186,000 square miles of ocean floor.They mostly exist in the warmest parts of the world.This is because Coral reefs develop in shallow warm water usually near land and mostly in the tropics.Coral reefs closest to us are found off the coast of Florida. D) Coral reefs are great underwater worlds. They cover about 186,000 square miles of ocean floor. They exist in the warmest parts of the world. This is because coral reefs develop in shallow, warm water, usually near land and mostly in the tropics. Coral reefs prefer temperatures between 70 and 85 degrees Fahrenheit This is why they are found off the coasts of Africa, India, Australia, and Brazil Coral reefs nearest to us are found off the coast of Florida Help pls!!!!!!!!!!!!!!!!!!! Ana made this table to show how the respiratory and circulatory systems work together.Respiratory. Circulatorytakes in oxygen delivers oxygen to all parts of the bodyand passes it to circulatory system-------------------------------------------------------- breathes out gaseous waste produced by cells Which sentence should be added to the column labeled Circulatory? A. includes the windpipe and lungs B. adds oxygen to the blood C. controls air flow through the diaphragm D. picks up wastes from cells and delivers to lungs enumerate the four (4) steps to compose a simple melody? DUE TODAY!Read the following line from the poem The Village Blacksmith Hear him swing his heavy sledgeWhat literary device is used?A. AlliterationB. RhymeC. RepetitionD. ImageryPoem: Under a spreading chestnut-treeThe village smithy stands;The smith, a mighty man is he,With large and sinewy hands,And the muscles of his brawny armsAre strong as iron bands.His hair is crisp, and black, and long;His face is like the tan;His brow is wet with honest sweat,He earns whate'er he can,And looks the whole world in the face,For he owes not any man.Week in, week out, from morn till night,You can hear his bellows blow;You can hear him swing his heavy sledge,With measured beat and slow,Like a sexton ringing the village bell,When the evening sun is low.And children coming home from schoolLook in at the open door;They love to see the flaming forge,And hear the bellows roar,And catch the burning sparks that flyLike chaff from a threshing-floor.He goes on Sunday to the church,And sits among his boys;He hears the parson pray and preach,He hears his daughter's voiceSinging in the village choir,And it makes his heart rejoice.It sounds to him like her mother's voiceSinging in Paradise!He needs must think of her once more,How in the grave she lies;And with his hard, rough hand he wipesA tear out of his eyes.Toiling,rejoicing,sorrowing,Onward through life he goes;Each morning sees some task begin,Each evening sees it close;Something attempted, something done,Has earned a night's repose.Thanks, thanks to thee, my worthy friend,For the lesson thou hast taught!Thus at the flaming forge of lifeOur fortunes must be wrought;Thus on its sounding anvil shapedEach burning deed and thought. If a company employed 50 people in 1995, and tripled their employment by 2005, how many total people would be employed if there are 40% more employees than in 2005 by 2015?