Answer:
Despite their similarities, Cassvania and Koopmansville are able to trade because of:________.
a. external economies of scale.
Explanation:
Koopmansville enjoys external economies of scale over Cassavania in the production of canoes. These benefits come in the form of lower production and operating costs and reduced variable costs per unit as a result of operational efficiencies and synergies. In addition, the residents of Koopmansville, given their environment, have natural sense of boat-making.
Green Corporation reported pretax book income of $1,040,000. During the current year, the net reserve for warranties increased by $52,000. In addition, tax depreciation exceeded book depreciation by $110,000. Finally, Green subtracted a dividends received deduction of $26,000 in computing its current-year taxable income. Green's cash tax rate is
Answer:
19.30%
Explanation:
Calculation to determine what Green's cash tax rate is
First step is to calculate the Taxes payable using this formula
Taxes payable = (Pretax book income + provision for warranties - depreciation in excess of books - dividends received deduction) x 21%
Let plug in the formula
Taxes payable= ($1,040,000 + $52,000 - $110,000 - $26,000) x 21%
Taxes payable=$956,000×21%
Taxes payable= $200,760
Now let determine the Cash tax rate using this formula
Cash tax rate = Taxes payable / Pretax book income
Let Plug in the formula
Cash tax rate = $200,760 / $1,040,000
Cash tax rate = .1930
Cash tax rate=19.30%
Therefore Green's cash tax rate is 19.30%
Flack Corporation, a merchandiser, provides the following information for its December budgeting process: The November 30 inventory was 1,800 units. Budgeted sales for December are 4,000 units. Desired December 31 inventory is 2,840 units. Budgeted purchases are: Multiple Choice 5,800 units. 6,840 units. 4,000 units. 5,040 units. 1,240 units.
Answer: 5,040 units
Explanation:
Budgeted purchases are the purchases that the company needs to make in order to be able to sell its budgeted sales for the month and still have the desired ending inventory they want.
Budgeted purchases can be calculated by the formula:
= Budgeted sales + Desired Ending inventory - Opening inventory
= 4,000 + 2,840 - 1,800
= 6,840 - 1,800
= 5,040 units
information of samriyan enterprises is given below.a)Started bussiness with Rs 20000 b) purchase good of Rs 15000 from Ram.c)Goods sold on cash Rs 18000 d)Cash paid Ram Rs 10000 e)A gain goods purchase from Ram of rs 20000 f) Paid to Ram Rs 24000 in full settlement of his account.Required a) journal entries
Answer:
a) Dr: Cash 20000
Cr: Equity/Capital 20000
b) Dr: Goods 15000
Cr: Payable 15000
c) Dr: Cash 18000
Cr: Sales 18000
d) Dr: Payable 10000
Cr: Cash 10000
e) Dr: Goods 20000
Cr: Payable 20000
f) Dr: Payable 30000
Cr: Cash 24000
Cr: Profit and Loss 6000
Sales totaled $1,277,750 for the year, variable selling and administrative expenses totaled $158,710, and fixed selling and administrative expenses totaled $212,190. There was no beginning inventory. Assume that direct labor is a variable cost. Under variable costing, the company's net operating income for the year would be:
Complete Question:
Krepps Corporation produces a single product. Last year, Krepps manufactured 32,150 units and sold 26,900 units. Production costs for the year were as follows: Direct materials Direct labor Variable manufacturing overhead Fixed manufacturing overhead $234, 695 $154, 320 $279, 705 $482, 250 Sales totaled $1,277,750 for the year, variable selling and administrative expenses totaled $158,710, and fixed selling and administrative expenses totaled $212.190. There was no beginning inventory. Assume that direct labor is a variable cost. Under variable costing, the company's net operating income for the year would be:
Multiple Choice
O $28,350 higher than under absorption costing.
0 $28,350 lower than under absorption costing.
0 $78,750 lower than under absorption costing,
0 $78,750 higher than under absorption costing.
Answer:
Krepps Corporation
Under variable costing, the company's net operating income for the year would be:
0 $78,750 lower than under absorption costing
Explanation:
a) Data and Calculations:
Production units = 32,150 units
Sales units = 26,900 units
Production costs :
Direct materials $234, 695
Direct labor $154, 320
Variable manufacturing overhead $279, 705
Fixed manufacturing overhead $482, 250
Sales for the year $1,277,750
Variable selling and administrative expenses $158,710
Fixed selling and administrative expenses $212,190
Income Statement under variable costing:
Sales for the year $1,277,750
Variable cost of goods sold $559,520
Variable selling and administrative expenses $158,710
Total variable costs $718,230
Contribution margin $559,520
Fixed manufacturing overhead $482,250
Fixed selling and administrative expenses $212,190
Total fixed costs $694,440
Net operating loss $134,920
Direct materials $234, 695
Direct labor $154, 320
Variable manufacturing overhead $279, 705
Total variable manufacturing cost $668,720
Production units = 32,150
Unit costs = $20.60
Cost of goods sold = $559,520 ($20.80 * 26,900)
Income Statement under absorption costing:
Sales for the year $1,277,750
Cost of goods sold $963,020
Gross profit $314,730
Fixed selling and administrative expenses $212,190
Variable selling and administrative expenses $158,710
Total fixed costs $370,900
Net operating loss $56,170
Direct materials $234, 695
Direct labor $154, 320
Variable manufacturing overhead $279, 705
Fixed manufacturing overhead $482, 250
Total manufacturing costs $1,150,970
Production units = 32,150
Cost per unit = $35.80
Cost of goods sold = $963,020 ($35.80 * 26,900)
Difference = $78,750 ($134,920 - $56,170)
Pop owns 87% of the common stock of Sugar. On December 31, 2017, Pop's Receivables include $296,880 that Pop advanced to Sugar. What portion (stated in dollars) of the intercompany receivable should be eliminated in preparing Pop's consolidated financial statements
Answer: $296,880
Explanation:
Pop owns more than 50% of Sugar which means that Sugar is a subsidiary of Pop's. When this happens, trade between the two are not shown in the consolidated financial statement unless the goods traded have been sold off to a third party.
As these goods have not, and are still considered accounts receivable to Sugar, the entire amount will be removed from the consolidated financial statements.
Mussatto Corporation produces snowboards. The following per unit cost information is available: direct materials $17, direct labor $6, variable manufacturing overhead $3, fixed manufacturing overhead $19, variable selling and administrative expenses $1, and fixed selling and administrative expenses $13. Using a 30% markup percentage on total per unit cost, compute the target selling price. (Round answer to 2 decimal places, e.g. 10.50.)
Answer:
the target selling price is $76.70
Explanation:
The computation of the target selling price is shown below:
= Total cost + 1 × markup percentage
= ($17 + $6 + $3 + $19 + $1 + $13) × (1.30)
= $76.70
hence, the target selling price is $76.70
We simply applied the above formula so that the target selling price could be determined
Entries for Notes Payable A business issued a 60-day, 10% note for $96,000 to a creditor on account. Journalize the entries to record (a) the issuance of the note and (b) the payment of the note at maturity, including interest. Assume a 360-day year. If an amount box does not require an entry, leave it blank. If required, round yours answers to whole dollar.
Answer:
Business A
Journal Entries:
Debit Accounts Payable $96,000
Credit 10% Notes Payable $96,000
To record the issuance of a 60-day, 10% note to a creditor on account.
Debit 10% Notes Payable $96,000
Debit Interest Expense $1,600
Credit Cash $97,600
To record the payment of the note at maturing, including interest.
Explanation:
a) Data and Analysis:
Accounts Payable $96,000
10% Notes Payable $96,000
10% Notes Payable $96,000
Interest Expense $1,600
Cash $97,600
Luthan Company uses a plantwide predetermined overhead rate of $23.90 per direct labor-hour. This predetermined rate was based on a cost formula that estimated $286,800 of total manufacturing overhead cost for an estimated activity level of 12,000 direct labor-hours. The company incurred actual total manufacturing overhead cost of $266,000 and 11,100 total direct labor-hours during the period.
Required:
Determine the amount of manufacturing overhead that would have been applied to units of product during the period.
Answer:
Allocated MOH= $262,900
Explanation:
Giving the following information:
Plantwide predetermined overhead rate= $23.90 per direct labor hour.
The company incurred actual 11,100 total direct labor hours during the period.
To allocate overhead costs, we need to use the following formula:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Allocated MOH= 11,000*23.9
Allocated MOH= $262,900
Allie, a human resource manager at an electronics firm, observes that many employees who are reaching the traditional retirement age are not interested in leaving the organization. Which statement best explains the reason for this trend among older employees?
A) There are laws against gender discrimination.
B) There is a rise in the availability of pensions.
C) Jobs are becoming less physically demanding.
D) Phased-retirement programs require employees to work longer hours.
E) Older workers generally don't have much debt.
Answer:
C) Jobs are becoming less physically demanding.
Explanation:
Since in the question it is mentioned that at the time when the employee reaches to the retirement age so they are not interested in leaving the organization as they dont want to search for a new job also they are happy with the current job. In addition to this, jobs are very less physical demanding because of their ages
Therefore the option c is correct
Precision Corporation used a predetermined overhead rate last year of $3 per direct labor-hour, based on an estimate of 24,000 direct labor-hours to be worked during the year. Actual costs and activity during the year were: Actual manufacturing overhead cost incurred $84,000 Actual direct labor-hours worked 27,000 The overapplied or underapplied manufacturing overhead for the year was:
Answer:
$12,000 Overhead Underapplied
Explanation:
Calculation to determine what The overapplied or underapplied manufacturing overhead for the year was:
Total pre-determined manufacturing overhead $72,000
($3*24,000)
Less Actual manufacturing overhead cost incurred ($84,000)
Overhead Underapplied $12,000
Therefore The overapplied or underapplied manufacturing overhead for the year was:$12,000 Overhead Underapplied
g. provides the following information for 20X8: Net income $260,000 Market price per share of common stock $60 per share Dividends paid $200,000 Common stock outstanding at Jan. 1, 2018 150,000 shares Common stock outstanding at Dec. 31, 2018 230,000 shares The company has no preferred stock outstanding. Calculate the price/earnings ratio of common stock.
Answer:
53.09
Explanation:
The price/earnings ratio of common stock is an investment ratio that compares the current price of the stock to its earnings per share, in a bid to assess the stock performance relative to its earnings
share price=$60
earnings per share=net income/year-end shares outstanding
net income=$260,000
year-end outstanding shares=230,000
earnings per share=$260,000/230,000
earnings per share=$1.13
price/earningsratio=$60/$1.13
price/earningsratio=53.09
Chance, Inc. sold 5,000 units of its product at a price of $172 per unit. Total variable cost per unit is $131, consisting of $92 in variable production cost and $39 in variable selling and administrative cost. Compute the manufacturing margin for the company under variable costing.
Answer:
$400,000
Explanation:
Computation for the manufacturing margin for the company under variable costing
Using this formula
Manufacturing margin= Sales - Total variable production cost
Let plug in the formula
Manufacturing margin=( 5,000*$172)- (5,000*$92)
Manufacturing margin=$860,000-$460,000
Manufacturing margin= $400,000
Therefore the manufacturing margin for the company under variable costing is $400,000
NSDC has a contract to produce 9 satellites to support a worldwide telephone system (for Alaska Telecom, Inc.) that allows individuals to use a single, portable telephone in any location on earth to call in and out. NSDC will develop and produce the 9 units. NSDC has estimated that the R&D costs will be NOK (Norwegian Krone) 12,000,000. Material costs are expected to be NOK 6,000,000. They have estimated the design and production of the first satellite will require 100,000 labor hours and an 80 percent improvement curve is expected. Skilled labor cost is NOK 300 per hour. Desired profit for all projects is 25 percent of total costs.
A. How many labor hours should the eighth satellite require?
B. How many labor hours for the whole project of eight satellites?
C. What price would you ask for the project? Why?
D. Midway through the project your design and production people realize that a 75 percent improvement curve is more appropriate. What impact does this have on the project?
E. Near the end of the project Deutsch Telefon AG has requested a cost estimate for four satellites identical to those you have already produced. What price will you quote them? Justify your price.
we have the following information:
R&D = NOK 12000000
Materials = 6000000
Labour hours = 100000
Improvement curve = 80%
Skilled labour = 300/hour
Desired profit = 25%
a. Number of hours:
Using the learning curves table, the value for 80% in the 8th unit is = 0.5120
therefore the number of learning hours = 100000 x 0.5120
= 51200 hours
the eight satellite would need 51200 hours of labor
b. The labour hours for the whole project of 8
The corresponding value using the learning curves cumulative value table = 5.346
so the labour hours = 100000*5.346
= 534600 hours
The whole project requires 534600 hours.
c. Price for the project
We first find the total cost of the project
Total cost of labor = required hours x cost of labor
= 534600 x NOK300
= 160380000
Then we find the margin of profit
25% x total cost
25% (160380000 + 12000000 + 6000000)
= 178380000 x 0.25
= 44595000
The proposed price would be
44595000+160380000+12000000+6000000
= 222,975,000 NOK
the total price is 222,975,000 NOK. This is the price I would ask for.
D. a 75% rate is = 4.802 at 8 units in the cumulative values table.
Total hours = 100000x4.802
= 480200 hours
Total hours = 480200x 300
= 144060000
profit margin = 25% (144060000x6000000x12000000)
= 40515000
The impact that this has is that the profit margin has now fallen from 44595000 Nok to 40515000 NOK
E.
To build these satellites NSDC had 6million NOK
6million/2 = 3000000
4 units at 80 percent in the learning curve = 3.142
100000x3.142 = 314200 hours
Total cost of labor = 314200 hours x 300
= 94260000 NOK
Profit margin = 25% x 94260000 x 12000000 x 3000000
= 27315000 NOK
The justified price that i would quote them = 27315000+94260000+3000000+12000000
= 136575000 NOK
This is the proposed price for the 4
Here is a similar question and solution: https://brainly.com/question/14398508?referrer=searchResults
A physical count of merchandise inventory on July 30 reveals that there are 180 units on hand. Using the FIFO inventory method, the amount allocated to ending inventory for July is
Answer: $3,708
Explanation:
Using FIFO means that the earlier goods are sold before the later ones so the closing inventory would have the latest goods purchased.
If there are 180 units on hand, the cost would be:
54 units purchased at $22(180 - 54) units purchased at $20Closing inventory is:
= (54 * 22) + ( (180 - 54) * 20)
= (54 * 22) + ( 126 * 20)
= $3,708
Midsouth Stitchery wants to improve their productivity. Their process yield is currently 91.56% based on 9816 yards of material. If they are going to improve their productivity to 92.10, how many yards of finished material will they have to produce from the same amount of material input
Answer:
9,040.54 yards
Explanation:
Input material amount I = 9,816 yards
Productivity P = 92.10%
Let Output Material amount be O
O = I * P
O = 9,816 yards * 0.9210
O = 9040.536
O = 9040.54 yards
So, the unit of yards they will have to produce from the same amount of material input is 9,040.54 yards
During its first year of operations, the McCormick Company incurred the following manufacturing costs: Direct materials, $4 per unit, Direct labor, $2 per unit, Variable overhead, $3 per unit, and Fixed overhead, $160,000. The company produced 20,000 units, and sold 15,000 units, leaving 5,000 units in inventory at year-end. What is the value of ending inventory under absorption costing
Answer: $85,000
Explanation:
Find out the cost of per unit of inventory under absorption costing:
= Direct materials + Direct labor + Variable overhead + Fixed overhead per unit
= 4 + 2 + 3 + 160,000 / 20,000 units
= 4 + 2 + 3 + 8
= $17 per unit
If 5,000 units are left, the value of those units are:
= 5,000 * 17
= $85,000
trình bày các vai trò của đạo đức kinh doanh trong phát triển doanh nghiệp
Answer:
Explanation:
Trung thực: Tính trung thực trong đạo đức kinh doanh thể hiện ở chỗ không buôn bán, sản xuất những mặt hàng nhà nước cấm, không dùng các chiêu trò dối trá để đạt được lợi ích của mình, không trốn thuế, làm ăn phi pháp; không tham ô, hối lộ; trung thành chấp hành đúng quy định của pháp luật…
Tôn trọng con người: Tôn trọng con người bao gồm tôn trọng nhân viên, đối tác khách hàng, đối thủ cũng như tất cả những người làm việc cùng với mình
Đạo đức kinh doanh gắn liền lợi ích của công ty doanh nghiệp với lợi ích chung của khách hàng và trách nhiệm đối với xã hội
Suppose an income tax is imposed that takes $2,000 from someone with an income of $20,000, $2,500 from someone with an income of $30,000, and $4,000 from someone with an income of $80,000. This tax would be classified as
Answer: Regressive tax
Explanation:
Regressive tax refers to a tax regime where the tax rate reduces as the level of income increases.
In the above scenario, the income tax rates are:
$20,000 income = 2,000 / 20,000 = 10%
$30,000 income = 2,500 / 30,000 = 8.3%
$8,000 income = 4,000 / 80,000 = 5%
Notice how the tax rates reduced as the income earned went up. This is why this is a regressive tax regime.
The members of a wedding party have approached Imperial Jewelers about buying 14 of these gold bracelets for the discounted price of $363.00 each. The members of the wedding party would like special filigree applied to the bracelets that would increase the direct materials cost per bracelet by $8. Imperial Jewelers would also have to buy a special tool for $461 to apply the filigree to the bracelets. The special tool would have no other use once the special order is completed. To analyze this special order opportunity, Imperial Jewelers has determined that most of its manufacturing overhead is fixed and unaffected by variations in how much jewelry is produced in any given period. However, $12.00 of the overhead is variable with respect to the number of bracelets produced. The company also believes that accepting this order would have no effect on its ability to produce and sell jewelry to other customers. Furthermore, the company could fulfill the wedding partyâs order using its existing manufacturing capacity.
Required:
a. What is the financial advantage (disadvantage) of accepting the special order from the wedding party?
b. Should the company accept the special order?
answers:
the financial advantage = 4,341 dollars
given that there is an advantage, then the project has to be accepted.
Explanation:
total incremental revenue from the 14 bracelets = 14 x 363 = $5082
direct material = 8 x 14 = 112
overhead = 12 x 14 = 168
we have the additional expense for this tool to be 461 dollars
for the special filigree that is to be attached to this bracelet e have
112 + 168 + 461 = $741
a. the financial advantage of accepting this = 5082 - 741 = 4341 dollars
b. given that there is a financial advantage then it is better that this order is accepted.
A company borrowed $10,000 from the bank at 5% interest. The loan has been outstanding for 45 days. Demonstrate the required adjusting entry for this company by completing the following sentence. The required adjusting entry would be to debit the Interest __________________ account and ___________________ the Interest ___________________ account.
Answer:
The required adjusting entry would be to debit the Interest expense account and credit the Interest payable account.
Explanation:
The number of days that a loan debt stays unpaid is referred to as the outstanding number of days.
In line with the general accounting rules, all expenses must be debited. Therefore, the interest expense has to be debited.
Interest payable, however, is the amount owed to a lender by a firm and is thus credited as the matching journal entry to the interest expense.
Therefore, we have:
The required adjusting entry would be to debit the Interest expense account and credit the Interest payable account.
Năm trước, doanh thu đạt được 1 triệu $, trong đó 250.000 là doanh thu bán chịu; số dư khoản phải thu khách hàng trung bình là 41.096$. Năm nay, công ty kỳ vọng doanh thu sẽ tăng thêm 50%, tỷ lệ doanh thu bán chịu/doanh thu không đổi, kỳ thu tiền bình quân tăng 50% (giả sử một năm có 365 ngày). Nếu khoản phải thu tăng thêm được tài trợ từ bên ngoài (chẳng hạn như vay ngân hàng) thì công ty cần thêm nguồn tài trợ này là bao nhiêu?
punda mavana Umbi. posddajh jzushl Unni Sunni nayye mayiru
Brad operates a hardware store. He maintains the books using the cash method. At the end of the year, his accountant computes his accrual basis income that is used on his tax return. For 2018, Brad had cash receipts of $2,200,000, which included $750,000 collected on accounts receivable from 2017 sales. At the end of 2018, he had $910,000 in accounts receivable from customers, all from 2018 sales. Brad paid cash for all of the purchases. The total amount he paid for merchandise in 2018 was $1,100,000. At the end of 2017, he had merchandise on hand with a cost of $165,000. At the end of 2018, the cost of merchandise on hand was $140,000.
a. Brad's accrual basis gross receipts for 2018 are: __________
b. The cost of goods sold for 2018 under the accrual method is: ____________
c. The gross profit from merchandise sales for 2018 under the accrual basis is:__________
Answer:
Brad Hardware Stores
a. Brad's accrual basis gross receipts for 2018 are: __________
= $1,450,000.
b. The cost of goods sold for 2018 under the accrual method is: ____________
= $1,125,000.
c. The gross profit from merchandise sales for 2018 under the accrual basis is:__________
= $1,235,000.
Explanation:
a) Data and Calculations:
Sales revenue for 2018:
Cash receipts = $2,200,000
Less 2017 accounts receivable $750,000
Add 2018 accounts receivable $910,000
Sales revenue for 2018 = $2,360,000
Gross receipts for 2018:
Cash receipts = $2,200,000
Less 2017 accounts receivable $750,000
Gross cash receipts = $1,450,000
Purchases for 2018 = $1,100,000
Beginning inventory = $165,000
Ending inventory = $140,000
Cost of goods sold = $1,125,000
Accrual Basis:
Sales revenue for 2018 = $2,360,000
Cost of goods sold = 1,125,000
Gross profit $1,235,000
You are considering buying bonds in ACBB, Inc. The bonds have a par value of $1,000 and mature in 35 years. The annual coupon rate is 20.0% and the coupon payments are annual. If you believe that the appropriate discount rate for the bonds is 17.0%, what is the value of the bonds to you
Answer:
Bond Price= $121.27
Explanation:
Giving the following information:
Face value= $1,000
Coupon= 0.2*1,000= $20
Maturity= 35 years
Discount rate= 17%
To calculate the price of the bond, we need to use the following formula:
Bond Price= cupon*{[1 - (1+i)^-n] / i} + [face value/(1+i)^n]
Bond Price= 20*{[1 - (1.17^-35)] / 0.17} + [1,000/(1.17^35)]
Bond Price= 117.16 + 4.11
Bond Price= $121.27
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product are:
Answer:
1. The correct option is C. 54.
2. The correct option is E. 60.
3. The correct option is A. 3.
4. The correct option is E. 90%.
5. The correct option is E. y.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product:
Task Time (sec) Immediate Predecessor
u 30 none
v 30 u
w 6 u
x 12 w
y 54 x
z 30 v, y
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
A. 162
B. 72
C. 54
D. 12
E. 60
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
A. 162
B. 72
C. 54
D. 12
E. 60
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
A. 3
B. 4
C. 5
D. 6
E. 7
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
A. 100%
B. 92.5%
C. 75%
D. 87.5%
E. 90%
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
A. u
B. v
C. w
D. x
E. y
The explanation of the answers is now provided as follows:
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
The minimum cycle time is equal to the maximum task time. From the data in the question, it can be seen that the maximum task time is 54. Therefore, the correct option is C. 54. That is, the minimum possible cycle time (in seconds) for this situation is 54.
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
Desired cycle time (in seconds) = Demand rate / Number of hours per days = 480 / 8 = 60
Therefore, the correct option is E. 60.
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
Total task time = 30 + 30 + 6 + 12 + 54 + 30 = 162
Minimum possible cycle time = 54
Therefore, we have:
Minimum number of workstations needed = Total task time / Minimum possible cycle time = 162 / 54 = 3
Therefore, the correct option is A. 3.
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
Line efficiency = Total task time / (Minimum number of workstations needed * Desired cycle time) = 162 / (3 * 60) = 162 / 180 = 0.90, or 90%
Therefore, the correct option is E. 90%.
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
The last task should be the one has the longest task time. From the data table in the question, it can be observed that y is the task that has the longest task time. This implies y is the task to perform last.
Therefore, the correct option is E. y.
A manager spent 5 hours of his day in meetings. If he said that he spent 70% of his day, how many total hours did he work?
Answer:
The total hours the manager worked
= 7.14 hours
Explanation:
a) Data and Calculations:
Time spent by a manager in meetings per day = 5 hours
Percentage of time spent in meetings = 70%
Total hours the manager worked per day = 5/70% = 7.14 hours
b) The total hours that the manager worked per day = 7.14 hours or 7 hours 9 minutes (approximately). This is obtained by dividing the hours spent in meetings by the equivalent proportion that meetings consumed per day.
If money is your political voice, how loud is your voice? Who has the loudest voice?
Answer:
i....I honestly don't know I've tried online but it shows nothing sorry
Indy Company has the following data for one of its manufacturing plants:
Maximum units produced in a quarter (3-month period): 250,000 units
Actual units produced in a quarter (3-month period): 204,000 units
Productive hours in one quarter: 25,000 hours
Actual cycle time: 7.35 minutes
Theoretical cycle time: 6 minutes
Required:
1. Calculate the amount of processing time and the amount of nonprocessing time. If required, round your answers to two decimal places.
Processing time minutes
Nonprocessing time minutes
2. Calculate the MCE. If required, round your answer to nearest whole number. %
Answer:
1. Processing time:
Processing time = Theoretical time
Processing time is there for 6 minutes
Non processing time = Actual cycle time - processing time
= 7.35 - 6
= 1.35 minutes
2. Manufacturing Cycle Efficiency (MCE):
= Processing time / Actual cycle time
= 6 / 7.35
= 81.6%
The parts can be purchased from an outside supplier for only $28 each. The space in which the parts are now produced would be idle and fixed production costs would be reduced by one-fourth. If the parts are purchased from the outside supplier, the annual impact on the company's operating income will be:________
a) $24,000 increase
b) $24,000 decrease
c) $56,000 increase
d) $56,000 decrease
Answer:
d) $56,000 decrease
Explanation:
In the case when parts are produced by sharp corporation
Given that
Total cost per unit = $36
Total cost = Total cost per unit × parts
= $36 × 8,000
= $288,000
Now
If the parts are Purchased by the outside supplier, fixed costs decreased by one-fourth.
So, three-fourth fixed costs should be incurred.
Now
Total cost per unit = Purchase Price + three - fourth fixed costs
= $28 + (3 ÷4) × $20
= $28 + $15
= $43
Now
Total cost = $43 × 8,000
= $344,000
So, the operating income is
= $288,000 - $344,000
= $56,000 decrease
Fill in the missing information. Your broker faxed to you the following information about two semiannual coupon bonds that you are considering as a potential investment.â Unfortunately, your fax machine is blurring some of theâ items, and all you can read from the fax on the two different bonds is theâ following:
Features IBM Coupon Bond AOL Coupon Bond
Face value (Par) $5,000 $5,000
Coupon Rate 9.5% ?
Yield to maturity 6.5% 5.5%
Years to maturity 15 30
Price ? $8,302.28
Answer:
Filling the missing information:
Features IBM Coupon Bond AOL Coupon Bond
Face value (Par) $5,000 $5,000
Coupon Rate 9.5% 12.8%
Yield to maturity 6.5% 5.5%
Years to maturity 15 30
Price $6,410.40 $8,302.28
Explanation:
a) Data and Calculations:
Features IBM Coupon Bond AOL Coupon Bond
Face value (Par) $5,000 $5,000
Coupon Rate 9.5% ?
Yield to maturity 6.5% 5.5%
Years to maturity 15 30
Price ? $8,302.28
Features IBM Coupon Bond AOL Coupon Bond
Face value (Par) $5,000 $5,000
Coupon Rate 9.5% 12.8% ($640/$5,000 * 100)
Yield to maturity 6.5% 5.5%
Years to maturity 15 30
Price $6,410.40 $8,302.28
Price of IBM Coupon Bond:
N (# of periods) 15
I/Y (Interest per year) 6.5
PMT (Periodic Payment) 475
FV (Future Value) 5000
Results
PV = $6,410.40
Sum of all periodic payments $7,125.00
Total Interest $5,714.60
Coupon interest rate of AOL Bond:
N (# of periods) 30
I/Y (Interest per year) 5.5
PV (Present Value) 8302.28
FV (Future Value) 5000
Results
PMT = $640.27
Sum of all periodic payments $-19,208.06
Total Interest $5,905.78
Coupon interest rate = 12.8% ($640/$5,000 * 100)
A friend wants to borrow money from you. He states that he will pay you $4,700 every 6 months for 9 years with the first payment exactly 2 years and six months from today. The interest rate is an APR of 5.8 percent with semiannual compounding. What is the value of the payments today
Answer:
PV= $56,508.47
Explanation:
Giving the following information:
Semmiannual payment= $4,700
Number of periods (n)= 9*2= 18 semesters
Interest rate= 0.058/2= 0.029
First, we need to calculate the value of the payments at the moment of the first payment:
PV= A*{(1/i) - 1/[i*(1 + i)^n]}
A= Semmiannual payment
PV= 4,700*{(1/0.029) - 1/[0.029*(1.029^18)]}
PV= $65,191.42
Now, the present value using the following formula:
PV= FV / (1 +i)^n
n= 2.5*2= 5 semesters
PV= 65,191.42 / (1.029^5)
PV= $56,508.47
