In the diagram, disk 1 has a moment of inertia of 3.4 kg · m2 and is rotating in the counterclockwise direction with an angular velocity of 6.1 rad/s about a frictionless rod passing through its center. A second disk rotating clockwise with an angular velocity of 9.3 rad/s falls from above onto disk 1. The two then rotate as one in the clockwise direction with an angular velocity of 1.8 rad/s. Determine the moment of inertia, in kg · m2, of disk 2.

Answers

Answer 1

Answer:

I = 3.6 kg•m²

Explanation:

Conservation of angular momentum

Let's assume CW is the positive direction

3.4(-6.1) + I(9.3) = 3.4(1.8) + I(1.8)

I(9.3 - 1.8) = 3.4(1.8 + 6.1)

I(7.5) = 3.4(7.9)

I = 3.4(7.9)/(7.5) = 3.5813333333...

Answer 2

The moment of inertia of the second disk will be  [tex]I=3.58\ kg-m^2[/tex]

What is moment of inertia?

The moment of inertia is defined as the product of mass of section and the square of the distance between the reference axis and the centroid of the section.

here it is given that

MOI of disk one   [tex]I_1=3.4\ kg-m^2[/tex]

Angular velocity  [tex]w_1=6.1\ \frac{rad}{s}[/tex]

Angular velocity of disk two  [tex]w=1.8\ \frac{rad}{s}[/tex]

MOI of the disk two [tex]I=?[/tex]

The final angular velocity [tex]w_f= 1.8\ \frac{rad}{sec}[/tex]

Now from the conservation of the momentum the angular momentum before collision will be equal to the angular momentum after collision.

[tex]I_1w_1+I_2w_2=(I_1+I_2)w_f[/tex]

Now put the values in the formula

[tex](3.4\times 6.10)+(I_2\times 9.3)=(3.4+I_2)\times 1.8[/tex]

[tex]I_2=3.58\ kg-m^2[/tex]

Thus the moment of inertia of the second disk will be  [tex]I=3.58\ kg-m^2[/tex]

To know more about moment of inertia follow

https://brainly.com/question/18721435


Related Questions

(0.50kg)(6.0mls)+(1.00kg)(-12.00mls)

Answers

Answer:

-9.0 × 10-6 m3 kg

Explanation:

I'm not sure if that's what you're looking for nor do I know how to explain it.

13) A mass attached to the free end of a spring executes simple harmonic motion according to the equation y = (0.50 m) sin (18π t) where y is in meters and t is seconds. What is the period of vibration?

Answers

Hi there!

The period is given by:

[tex]T = \frac{2\pi}{w}[/tex]

T = Period (sec)

w = angular frequency (rad/sec)

According to the equation for SHM in terms of position:

y(t) = Asin(ωt + φ)

A = Amplitude (m)

ω = angular frequency (rad/sec)

t = time (sec)

φ = phase angle

In this instance, the angular frequency is given as 18π.

Plug this value into the equation for T:

[tex]T= \frac{2\pi}{18\pi} = \frac{1}{9} = \boxed{0.111 s}[/tex]

Use the sentence to answer the question.

Light is affected by gravity.

Which inference can be made based on this fact?

(1 point)

Light behaves differently in space than on Earth.
Light behaves differently in space than on Earth.

Gravity causes light to refract.
Gravity causes light to refract.

Light moves faster in space than on Earth.
Light moves faster in space than on Earth.

Stronger gravity causes an increase in light.

Answers

Answer:

Light behaves differently in space than on Earth.

Explanation:

Because the gravity field is greater near earth than in most of space. Not the areas near stars, black holes, pulsars, and such but in the vast emptyness between the clumpy spots.

Which of the following is most likely to be a secondary source

Answers

Answer:

analyze, assess or interpret an historical event, era, or phenomenon,.

Explanation:

Secondary sources are works that analyze, assess or interpret an historical event, era, or phenomenon, generally utilizing primary sources to do so. Secondary sources often offer a review or a critique. Secondary sources can include books, journal articles, speeches, reviews, research reports, and more.

During what time period does the balloon drift in a counterclockwise direction?

Answers

Yeh it’s 9am to 10 pm

A 0.75 kg model car is moving west at a speed of 9.0 m/s when it collides head-on with a 2.00 kg model truck that is traveling east at a speed of 10.0 m/s. After the collision, the 0.75 kg model car is now moving east at 11 m/s. What is the speed and direction of the model truck after the collision?

Answers

Answer:

  2.5 m/s east

Explanation:

Let east be the positive direction for velocity.

The change in momentum of the 0.75 kg model car is ...

  m1·v2 -m1·v1 = (0.75 kg)(11 m/s) -(0.75 kg)(-9 m/s)

  = (0.75 kg)(20 m/s) = 15 kg·m/s

The change in momentum of the 2.0 kg model car is the opposite of this, so the total change in momentum is zero.

  m2·v2 -m2·v1 = (2 kg)(v2 m/s) -(2 kg)(10 m/s) = 2(v2 -10) kg·m/s

The required relation is ...

  15 kg·m/s = -2(v2 -10) kg·m/s

  -7.5 = v2 -10 . . . . divide by -2

  2.5 = v2 . . . . . . . add 10

The velocity of the model truck after the collision is 2.5 m/s east.

A 70 kg hunter, standing on frictionless ice, shoots a 42 g bullet horizontally at a speed of 650 m/s . Part A What is the recoil speed of the hunter

Answers

Answer:

Explanation:

momentum is conserved. Initial momentum was zero, so final total momentum must also be zero

0.042(650) + 70v = 0

v = -0.39 m/s

|v| = 0.39 m/s

Check if correct or not:

Directions: Using what you learned about energy describe the energy transfer or transformations for each of the items below.
1. Clapping Your Hands:
Kinetic- sound
2. Dropping Your Pencil:

3. The Toaster:
Electric-Thermal/Heat
4. A Cat Lying in a Sunny Window:
Light-Thermal/heat
5. Lifting a Book Over Your Head:
kinetic-potential
6. The Radio:
Electric-sound

Tell me if correct or not

Answers

Answer:

Looks good to me

Explanation:

#2 should probably be turning potential energy to kinetic.

Identify the type of chemical reaction:

CaCO3 -->CaO + CO2

Answers

Explanation:

decomposition reaction.....

Answer:

caco₃--cao+co₂

calcium oxide + carbon die oxide gives us calcium carbonate

this is the reaction of Acidic oxide(cao) and Basic oxide (co₂) to form salt.

The diagram below shows a 5.00-kilogram block
at rest on a horizontal, frictionless table.
5.00-kg
block
Table
Which of the following is the correct name and strength of the force holding the block up?

Answers

The name and strength of the force holding the block up is 50 N upward - Normal force.

The given parameters:

Mass of the block, m = 5 kg

The weight of the block acting downwards due to gravity is calculated as follows;

W = mg

where;

g is acceleration due to gravity = 10 m/s²

W = 5 x 10

W = 50 N (downwards)

Since the block is at rest, an a force equal to the weight of the block must be acting upwards. This force is known as normal reaction.

Fₙ = 50 N (upwards)

Thus, the name and strength of the force holding the block up is 50 N upward - Normal force.

Learn more about Normal force here: https://brainly.com/question/14486416

The block will remain on the table because the normal force balances with the weight of the block. The correct answer is  50 N upward normal force

From the diagram shown a 5.00-kilogram block at rest on a horizontal, frictionless table. The weight of the block will act downward which will be

Weight W = mg

let g = 10 m/[tex]s^{2}[/tex]

W = 5 x 10

W = 50 N

The block will also produce an equal but in opposite direction of a normal force which is equal to the weight of the block. That is,

Normal force N = 50 N

The block will remain on the table because the normal force balances with the weight of the block.    

Therefore, the correct name and strength of the force holding the block up is 50 N upward normal force.

Learn more about stability here: https://brainly.com/question/517289

AP Physical problem the wording is really throwing me off and im totally lost on how to do this. I would love some help please and thank you! ​

Answers

Explanation:

a) Here is the free-body diagram. Note that I included the components of the weight mg (shown in dotted arrows) for use in the other parts of the problem.

b) The component of the weight parallel to the plane (shown in the diagram as a dotted arrow along the x-axis) is [tex]mg\sin15[/tex] and it is equal to

[tex]mg\sin15 = (25\:\text{kg})(9.8\:\text{m/s}^2)\sin15 = 63.4\:\text{N}[/tex]

c) Applying Newton's 2nd law to the y-axis, we can write

[tex]y:\;\;\;N - mg\cos15 = 0 \Rightarrow N = mg\cos15[/tex]

[tex]N = (25\:\text{kg})(9.8\:\text{m/s}^2)\cos15 = 236.7\:\text{N}[/tex]

d) The component of the weight mg into the plane is the same as the normal force, hence it's also 236.7 N.

e) To solve for the coefficient of friction, we apply Newton's 2nd law to the x-axis:

[tex]x:\;\;\;mg\sin15 - F_f = 0[/tex]

[tex]\Rightarrow F_f = mg\sin15\;\;(2)[/tex]

where [tex]F_f[/tex] is the frictional force defined as [tex]F_f = \mu N[/tex] so we can use Eqn(1) on Eqn (2) to write

[tex]\mu (mg\cos15) = mg\sin15[/tex]

Solving for [tex]\mu,[/tex] we get

[tex]\mu = \dfrac{\sin15}{\cos15} = \tan15 = 0.27[/tex]

A stereo speaker produces a pure "A" tone, with a frequency of 220.0 Hz.

What is the period of the sound wave produced by the speaker?


T=


What is the wavelength water of the same sound wave as it enters some water, where it has a speed of about 1480 m/s?

λwater=


What is the wavelength air of this sound wave as it travels through air with a speed of about 341 m/s?

λair=

Answers

(a) The period of the sound wave is 0.005 s.

(b) The wavelength of the wave when the speed of the wave is 1480 m/s is 6.73 m.

(c) The wavelength of the sound wave as it travels through air is 1.55 m.

The given parameters;

Frequency of the wave, F = 220 Hz

The period of the sound wave is calculated as follows;

[tex]T = \frac{1}{f} \\\\T = \frac{1}{220} \\\\T = 0.005 \ s[/tex]

The wavelength of the wave when the speed of the wave is 1480 m/s is calculated as follows;

[tex]v = f\lambda \\\\\lambda = \frac{v}{f} \\\\\lambda = \frac{1480}{220} \\\\\lambda = 6.73 \ m[/tex]

The wavelength of the sound wave as it travels through air with a speed of about 341 m/s;

[tex]\lambda = \frac{v}{f} \\\\\lambda = \frac{341}{220} \\\\\lambda = 1.55 \ m[/tex]

Learn more about wave equation here: https://brainly.com/question/4692600

Two rocks with different masses fall side by side, pulled downward by gravity. Why are they able to experience the same motion?(1 point)

The rock with more mass will also have more force pulling it down. Even though the accelerations are different, the rocks will have the same speed.
The rock with more mass will also have more force pulling it down. Even though the accelerations are different, the rocks will have the same speed.

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.
The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Gravity will pull the rocks down equally, so the accelerations can be the same.
Gravity will pull the rocks down equally, so the accelerations can be the same.

Gravity will pull the rocks down equally. Even though the accelerations are different, the rocks will have the same speed.

Answers

Answer:

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Explanation:

An object following a straight-line path at constant speed

A.) has no forces acting on it.

B.) has a net force acting on it in the direction of motion.

C.) has zero acceleration.

D.) must be moving in a vacuum.

E.) none of the above

Answers

An object following a straight-line path at constant speed is option C.) has zero acceleration.

Are there any forces acting on a moving item traveling in a straight line at a constant speed?

There are no forces operating on a body if it is travelling straight ahead at a steady speed. There are no forces operating on a body if it is travelling straight ahead at a steady speed.

Note that the physics concept of acceleration measures how quickly an object's motion is changing. An object's speed or velocity is what largely defines its motion.

Therefore, An object is considered to be accelerating when its velocity changes over time and as such  since acceleration of the object is  said to be  zero, one can say that the net force acting on it is also zero.

Learn more about straight-line path from

https://brainly.com/question/23271529
#SPJ1

Help!
A man standing in front of a plane mirror finds his image to be at a distance of 6m from himself. The distance of man from the mirror is ​

Answers

Answer:

The distance of man from the mirror is 3 m

Refer to the attachment

[tex]\Large\textsf{Hope \: It \: Helped}[/tex]

The distance of the man from the mirror is 3m

From the characteristics of image formed in a plane mirror,

Virtual and erectFormed behind the mirrorSame size as the objectLaterally inverted Distance of the image behind the mirror is the same as the distance of   the object from the mirror.  

⇒ From the last point,

Let the distance of the image behind the mirror be xAlso the distance of the man from the mirror is x

⇒ From the question,

x+x = 62x = 6x = 6/2x = 3 m

Hence, The distance of the man from the mirror is 3m

Learn more about mirror here:

There is a bell at the top of a tower that is 45 m high. The bell weighs 15 kg. The bell has energy. Calculate it.

Answers

Answer:

6621.75J

Explanation:

In this case, the bell is not in motion. So we are going to calculate its potential energy rather than its kinetic energy since kinetic energy is the energy a body possesses in motion.

The formula for the potential energy is m*g*h, meaning the mass * acceleration due to gravity * height. Here the mass, m = 15kg, the acceleration due to gravity = 9.81m/s^2, and the height, h = 45m

Substituting our values, the answer becomes 15 * 9.81 * 45 = 6621.75J. Hope you understood my explanation?

Your friend's Frisbee has become stuck 19 m above the ground in a tree. You want to dislodge the Frisbee by throwing a rock at it. The Frisbee is stuck pretty tight, so you figure the rock needs to be traveling at least 4.1 m/s when it hits the Frisbee.

If you release the rock 1.8 m above the ground, with what minimum speed must you throw it?

Answers

Answer:

18.36 m/s

Explanation:

We can solve this using conservation of energy. The energy in the system will be conserved since there are no outside forces acting upon it so the potential energy and kinetic energy will be equal. Giving us this formula to start:

1/2mv^2=mgh

m=mass

g=gravity

h=height

v=velocity

We can start by figuring out the total height the rock travels which we can do by subtracting the height of the frisbee by the height the rock started at.

19m-1.8m=17.2m

Now we can plug in our variables to solve for velocity.

First we negate mass since its on both sides and cancels out leaving us with.

1/2v^2=gh

Plug in.

1/2v^2=(9.8)(17.2)

1/2v^2=168.56

v^2=337.12

v=18.36m/s

The equation below can be used to calculate a change in gravitational potential energy. What units must be used for h? Give the full name, not the abbreviation.
e=m x g x h

Answers

Answer:

h = change in vertical position (height)

has units of distance.

Explanation:

The equation below can be used to calculate a change in gravitational potential energy then the units used for the height would be meters.

What is mechanical energy?

The sum of all the energy in motion (total kinetic energy) and all the energy that is stored in the system (total potential energy) is known as mechanical energy.

As given in the problem, the equation below can be used to calculate a change in gravitational potential energy, the units used for the height of the object would be in meters, which is the SI unit of the length

The gravitational potential energy = mass×acceleration ×height

                                                         

Thus, the unit of height used in the gravitational potential energy formula would be meter.

To learn more about mechanical energy from here, refer to the link;

brainly.com/question/12319302

#SPJ2

8 N to the left , and 4 N to the right. Find the net force. Is this balanced?

Answers

Explanation:

12N by first law of newton is net force after colloision

please help 9.2.1 project in science just ned an example​

Answers

Answer:

Give me what kind of example you need please so I can help you. Put it in the comments.

Explanation:

which statement about metals is true?

Answers

All metals are solid at (our) living temperatures except for mercury which is a liquid. Metals are shiny for a while at least when properly finished. Metals are good conductors of both heat and electricity. This is due to the excess electrons in their valence clouds that facilitate energy transfer.What are 5 characteristics of metal?

Metals are lustrous, malleable, ductile, good conductors of heat and electricity

Silver conducts electricity better than any other metal.

Brass is an alloy made from zinc and copper.

Pure gold is too soft for many things so most gold is combined with other metals to make it stronger. ...

World time periods are often listed by the metal used.

If you are good at activities that require agility, what are you able to do well?
1.maintain your heart rate in the upper ranges
2.quickly change the direction of your movement
3.hold a difficult position for a long period of time
4.strategize about the best way to win a game

Answers

Answer:

2.quickly change the direction of your movement

Explanation:

why is it so important that you take care of your nervous system?

Answers

Answer:

The nervous system handles the stress response, which, if overworked, can eventually lead to diseases ranging from high blood pressure to diabetes.

Explanation:

hope I helped

During take-off a 8kg model rocket is burning fuel causing its speed to increase
at a rate of 4m/s2 despite experiencing a 90N drag.

What’s is the strength of the thrust?
(Answer unit is in N)( and the answer isn’t 212)

Answers

The strength of the thrust is 122 newtons.

The motion of the rocket is described by the second Newton's law, whose model is shown below:

[tex]\Sigma F = F - D = m\cdot a[/tex] (1)

Where:

[tex]F[/tex] - Thrust, in newtons[tex]D[/tex] - Drag, in newtons[tex]m[/tex] - Mass of the rocket, in kilograms[tex]a[/tex] - Net acceleration of the rocket, in meters per square second

If we know that [tex]D = 90\,N[/tex], [tex]m = 8\,kg[/tex] and [tex]a = 4\,\frac{m}{s^{2}}[/tex], then the strength of the thrust is:

[tex]F = D + m\cdot a[/tex]

[tex]F = 90\,N + (8\,kg)\cdot \left(4\,\frac{m}{s^{2}} \right)[/tex]

[tex]F = 122\,N[/tex]

The strength of the thrust is 122 newtons.

To learn more on Newton's laws, we kindly invite to check this verified question: https://brainly.com/question/13678295

Compare the time it
takes the light to travel from your
teacher to your eye with the time
it takes sound to travel the same
distance.

Answers

Answer:

Light takes less time than sound.

Explanation:

Let's say, the teacher and the student are at a distance "d" from each other.

The medium around them would be air.

And,

The speed of light in air is approx. 3× 10 m/s

while, the speed of sound in air is approx. 330 m/s

We have a formula that establishes the relation between speed, distance and time.

[tex] \boxed{ \mathsf{speed = \frac{distance}{time} }}[/tex]

Our hunt for time — Speed in both the scenarios is known to us whereas the distance is same.

Sound

[tex] \mathsf{330 = \frac{d}{time_{s}} }[/tex]

[tex] \underline{\mathsf{time _{s} = \frac{d}{330} }}[/tex]

Light

[tex] \mathsf{3 \times {10}^{8} = \frac{d}{time _{l} } }[/tex]

[tex] \underline{ \mathsf{ time _{l} = \frac{d}{3 \times {10}^{8}} }}[/tex]

The best way of comparison is finding their ratio.

[tex] \implies \mathsf{\frac{ time_{s}}{time_{l} } = \frac{ \frac{d}{330} }{ \frac{d}{3 \times {10}^{8} } } }[/tex]

simplifying the fraction

[tex] \implies \mathsf{\frac{ time_{s}}{time_{l} } = \frac{d \times (3 \times {10}^{8} )}{330 \times d}}[/tex]

d gets canceled and we're left with the following expression

[tex] \implies \mathsf{\frac{ time_{s}}{time_{l} } = \frac{ (3 \times10 \times {10}^{7} )}{330}}[/tex]

30, being a common factor in the numerator as well as denominator, gets canceled out. and in its place remains 1/ 11

(why?

=> 30÷330 = 1÷11)

[tex] \implies \mathsf{\frac{ time_{s}}{time_{l} } = \frac{ 1\times {10}^{7} }{11}}[/tex]

taking time to the numerator on the other side.

[tex] \implies \mathsf{time_{s} = \frac{ 1\times {10}^{7} }{11}\times time_{l}}[/tex]

Therefore, we get timeₛ is approx. 10⁶ times the timeₗ.

That's a big difference, no wonder light's way much faster than sound.

As lesser the time taken to cover a distance, faster is the wave.

The sound takes about 874,000 times MORE time than the light takes.

3. A 1500 kg car moving at 30 m/s strikes a 6000 kg van initially at rest. If the car
comes to a complete stop after the collision, what is the final velocity of the van?

Answers

Answer:

7.5m/s

Explanation:

Force= mass × velocity

Energy is conserved, the car and van should have the same overall force.

1500kg × 30m/s= 6000kg × final velocity

Final velocity = 7.5m/s

A wagon of dog treats (combined mass 55 kg) is rolling at 2.1 m/s. A dog with mass 21 kg dives into the wagon, colliding with just enough momentum to make both stop. If the collision between the dog and the wagon lasts 0.1 s, what is the magnitude of the average force that will be exerted on the dog by the collision with the wagon

Answers

Answer:

Explanation:

An impulse results in a change of momentum

If the wagon and dog both stop, they must have had equal and opposite momentums

FΔt = mΔv

F = mΔv/Δt = m(v₁ - v₀)/(t₁ - t₀)

v₁ = t₀ = 0

F = m(v₀)/t₁

F = 55(2.1)/0.1 = 1155 N

We could have also figured the dog's initial velocity and used the dog's mass in the equation as well. Result would be identical.

Name the energy possessed by hot air

Answers

Answer:

geothermal energy

Explanation:

the energy is obtained from the heat within the surface of earth

Answer:

heat energy

Explanation:

A mars surface exploration vehicle drops a rock off a 1.00 I'm high vertical Cliff. The sound of the rock landing at the base of the cliff is recorded by instruments on the vehicle 27.1 seconds later. Calculate the acceleration due to gravity on Mars given that the speed of sound on Mars is 320 m/s

Answers

The acceleration due to gravity on Mars is 11.81 m/s².

The given parameters:

Height of the cliff, h = 1 mTime of motion of the sound wave, t = 27.1 sSpeed of sound in mass, v = 320 s

The equation of motion to determine the acceleration due to gravity on the moon is calculated as follows;

[tex]s = vt + \frac{1}{2} gt^2[/tex]

where;

s is the distance traveledt is the time of motion

Since the time measured is two way time, the new equation for the total distance traveled is calculated as;

[tex]v = \frac{2d}{t} \\\\2d = vt\\\\d = \frac{vt}{2} \\\\d = \frac{320 \times 27.1}{2} \\\\d = 4,336 \ m[/tex]

The acceleration due to gravity is calculated as follows;

[tex]s = vt + \frac{1}{2} gt^2\\\\4,336 = 0 \ + \ \frac{1}{2} \times g \times (27.1)^2\\\\4,336 = 367.21g\\\\g = \frac{4,336}{367.21} \\\\g = 11.8 1 \ m/s^2[/tex]

Thus, the acceleration due to gravity on Mars is 11.81 m/s².

Learn more about acceleration due to gravity here: https://brainly.com/question/88039

Please respect! Can you answer this for me?

Answers

Answer:

ıf u find the answer can u comment me to notification thank u

Explanation:

Other Questions
What is the nineteenth term of an arithmetic sequence with first term 9 and common difference 5? Translate into algebraic expression: 22 decreased by y% Oscar has 1/5 of a jar of mustard. He puts equal amounts of the mustard onto 7 sandwiches and uses all of the mustard. What fraction of a jar of mustard does each sandwich have? Rewrite the following polynomial in standard form.123+04+8 what are microorganisms? write the living and non living characteristics of virus. A physics instructor wants to project a spectrum of visible-light colors from 400 nm to 700 nm as part of a classroom demonstration. She shines a beam of white light through a diffraction grating that has 600 lines per mm, projecting a pattern on a screen 2.9 m behind the grating.Required:How wide is the spectrum corresponding to m=1? Which expression is equivalent to(4x2x3)(3x*y)2? PLEASE FAST lenear equations In circle O, the length of radius OL is 6 cm and the length of arc LM is 6.3 cm. The measure of angle MON is 75. Circle O is shown. Line segments L O , M O, and N O are radii. The length of L O is 6 centimeters. Angle M O N is 75 degrees. The measure of arc L M is 6.3 centimeters. Rounded to the nearest tenth of a centimeter, what is the length of arc LMN? 7.9 cm 10.2 cm 12.6 cm 14.2 cm PLS HELP what reproductive process do bacteria use by forming two identical cells from one parent cell? a. binary fission b. fragmentation c. vegetative propagation d. fertilization pls answer quick , i have a time limit and i need help what will happen if you are not able to manage your time well ? Develop a hypothesis regarding one factor you think might affect the period of a pendulum or an oscillating mass on a spring. Potential factors include the mass, the spring constant, and the length of the pendulum's string. Write down your hypothesis. 2. Design a controlled experiment to test your hypothesis. Take extreme care to keep all factors constant except the variable you are testing. Find the solutions of the quadratic equation x2 + 7x + 10 = 0.Question 13 options:A) x = 2, 5B) x = 2, 5C) x = 7, 3D) x = 7, 3 ASAP pls answer immediatelyLiam wants to write an essay about how Ms. Webster, his english teacher, inspired his passion for reading during an ordinary class period. which detail would best support Liam's purpose? Use historical and geographic information to draw inferences and conclusionsWrite and cite evidence to defend a thesis statementBased on the information below.What did the Napoleonic Code have in common with the principles of the Enlightenment? It ensured that careers would be open on the basis of merit and not privileges of birth. It did not guarantee women equal rights but confirmed the existing supremacy of men over women; women had fewer rights than children. It didn't either enshrine individual rights or the security of the state- there was a balance. Write a paragraph comparing the changes in government after the American and French revolutions. Include information on each country's constitution and government role. After the American and French revolutions, there were many changes. America established a just government that protected the rights of their citizens. As for France, the third estate gained more rights for all male citizens. For example, before the revolution, the first and second estate did not have to pay any taxes. This changed, however, after the French revolution. Decide whether the following statement is TRUE or FALSE. A symporter would function as an antiporter if its orientation in the membrane were reversed (that is, if the portion of the protein normally exposed to the cytosol faced the outside of the cell instead). Which factors slowed the progress of the abolition movement in the United States?A. no significant abolitionist writers or speakers emerged in the United States.B. The abolishing slavery in the United States was left up to individual state governments.C. US citizens were largely hostile to any ideas associated with the enlightenment.D. Conflicts over slavery in the United States resulted in violence on a nationwide scale. a. In 2018, manufacturing workers in the United States earned average compensation of $21.86 per hour. That same year, manufacturing workers in Mexico earned average compensation of $3.20 per hour. U.S. manufacturers can possibly compete if multiple choice 1 the product in the United States is specialized. technology is cheaper in the United States. U.S. workers are more productive. some production is done in low-wage countries. b. All manufacturing is not done in Mexico and other low-wage countries because multiple choice 2 there is not enough foreign labor. of trade barriers. shipping costs are too high. consumers want domestically produced products. Morning Glory breakfast bars are packed full of the protein and complex carbohydrates your body needs to start your day on the right track. Which word in the sentence above has a positive connotation?A. needsB. packedC. startD. day A(x)=7x^3 -5x^4-2x +1 ;B(x)= 6x+ 5x^4 -7x^3 -17 tnh A(x) -B(x)