If there were no dark energy in the universe, the value of __________ would solely determine the evolution and fate of the universe.

Answers

Answer 1

Answer:

Ωmass

Explanation:

If there were no dark energy in the universe, the value of Ωmass would determine the evolution and fate of the universe.


Related Questions

Explain why a person travelling in a bus falls forward when bus stops suddenly

Answers

Answer:

Cause of Inertia of Motion

Explanation:

It can be explained as follows...when the moving bus suddenly stops, the lower part of the body of the passenger contact with the bus suddenly comes to rest while the upper part of the body tends to retain its state of motion due to inertia. As a result, the passenger is thrown forward.

A particle makes 800 revolution in 4 minutes of a circle of 5cm. Find
i. it's period
ii. Angular Velocity
iii. Linear Velocity
iv. It's acceleration
PLEASE FORMULAE SHOULD BE WRITTEN CLEARLY.
YOU CAN SNAP AND SEND

Answers

Answer:

i) The period of the particle is 0.3 seconds

ii) The angular velocity is approximately 20.94 rad/s

iii) The linear velocity is approximately 1.047 m/s

iv) The centripetal acceleration is approximately 6.98 m/s²

Explanation:

The given parameters are;

The number of revolution of the particle, n = 800 revolution

The time it takes the particle to make 800 revolutions = 4 minutes

The dimension of the circle = 5 cm = 0.05 m

Given that the dimension of the circle is the radius of the circle, we have;

i) The period of the particle, T = The time to complete one revolution

T = 1/(The number of revolutions per second)

∴ T = 1/(800 rev/(4 min × 60 s/min)) = 3/10 s

The period, T = 3/10 seconds = 0.3 seconds

ii) The angular velocity, ω = Angle covered/(Time)

800 revolutions in 4 minutes = Angle of (800 × 2·π) in 4 minutes

∴ ω = (800 × 2·π)/(4 × 60) = 20·π/3

The angular velocity, ω = 20·π/3 rad/s ≈ 20.94 rad/s

iii) The linear velocity, v = r × ω

∴ The linear velocity, v = 0.05 m × 20·π/3 rad/s = π/3 m/s ≈ 1.047 m/s

iv) The centripetal acceleration, [tex]a_c[/tex] = v²/r

∴ The centripetal acceleration, [tex]a_c[/tex] = (π/3)²/(0.05) = 20·π/9

The centripetal acceleration, [tex]a_c[/tex] = 20·π/9 m/s² ≈ 6.98 m/s²

help me guys, i am illiterate
if the mass of the moon 7.2*10^22 kg and and the radius is 1.7*10^6m , what will be the acceleration due to gravity of the moon ? what will be the weight of a person of 60 kg mass on the surface of moon ?

Answers

Answer:

A. 1.66 N/Kg or m/s²

B. 99.6 N

Explanation:

A. Determination of the acceleration due to gravity of the moon.

Mass of the moon (Mₘ) = 7.2×10²² Kg

Radius of the moon (rₘ) = 1.7×10⁶ m

Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²

Acceleration due to gravity of the moon (gₘ)

gₘ = GMₘ / rₘ²

gₘ = (6.67×10¯¹¹ × 7.2×10²²) / (1.7×10⁶)²

gₘ = 1.66 N/Kg

Acceleration due to gravity on the moon is 1.66 N/Kg or m/s²

B. Determination of the weight of a 60 kg person on the moon.

Acceleration due to gravity of the moon (gₘ) = 1.66 N/Kg

Mass of person (m) = 60 Kg

Weight on the moon (Wₘ) =?

Wₘ = m × gₘ

Wₘ = 60 × 1.66

Wₘ = 99.6 N

Thus, the weight of a 60 kg person on the moon is 99.6 N

Define SI units. Also mention their importance. SI unit The​

Answers

Answer:

SI unit is an internationally accepted system and have the same value all over the world .

I don't know the importance sotry

Answer:

SI unit is an internationally accepted system that have same value all over the world.

Name the type of motion executed by the motion of the moon around the earth.

Answers

Answer:

The motion of the moon around the earth is circular motion

Explanation:

A train travels 600 kilometers in 1 hour. What is the train's velocity in meters/second?

Answers

here's the answer to your question

1. Una carga Q1 = + 12 μC se coloca a una distancia r = 0.024 m desde una carga Q2 = + 16 μC. a) Determina la magnitud de la fuerza electrostática que actúa sobre las dos cargas, Q1 y Q2. b) ¿Es la fuerza la atracción o repulsión? 2. Determina la intensidad del campo eléctrico a una distancia radial de r = 48 mm desde una carga de Q = 24 μC. 3. Una carga Q1 = 24 mC se coloca a una distancia r = 0.032 m desde una carga Q2 = - 12 μC. a. Determina la cantidad de energía potencial eléctrica que tiene la carga Q1. b. Determina el potencial eléctrico en la posición de Q2.

Answers

Answer:

1. a. 3,000 N

b. Repulsión

2. 46.875 × 10⁶ N/C

3. a. 81,000 J

b. 6.75 × 10⁹ V

Explanation:

1. Los parámetros dados son;

Q₁ = +12 μC, Q₂ = +16 μC

La distancia entre las cargas, r = 0.024

La magnitud de la fuerza electrostática, F, entre cargas se da como sigue;

[tex]F = k \times \dfrac{Q_1 \cdot Q_2}{r^2}[/tex]

Donde, k = constante de Coulomb = 9.0 × 10⁹ N · m² / C²

Por lo tanto, obtenemos;

F = 9.0 × 10⁹ × 12 × 10⁻⁶ × 16 × 10⁻⁶ / 0.024² = 3.000

La magnitud de la fuerza electrostática, entre las cargas, F = 3000 N

(b) Dado que tanto Q₁ como Q₂ son cargas positivas, y las cargas iguales se repelen entre sí, la fuerza es la repulsión.

2) La intensidad de un campo eléctrico, E, se da como sigue;

[tex]E = \dfrac{k \cdot Q}{r^2}[/tex]

La magnitud de la carga, Q = 24 μC

La distancia donde se mide el campo, r = 48 mm = 0.048 m

Por lo tanto, E = 9.0 × 10⁹ × 12 × 10⁻⁶ / 0.048² = 46,875,000 N / C

La intensidad de un campo eléctrico, E = 46,875,000 N / C = 46.875 × 10⁶ N / C

3. La magnitud de las cargas son;

Q₁ = 24 mC

Q₂ = -12 μC

La distancia entre las cargas, r = 0.032 m

un. El potencial eléctrico de una carga, [tex]U_E[/tex] , se da de la siguiente manera;

[tex]U_E = k \times \dfrac{Q_1 \cdot Q_2}{r}[/tex]

Por lo tanto;

[tex]U_E[/tex] = 9.0×10⁹ × 24 × 10⁻³ × (-12) × 10⁻⁶ /0.032 = -81,000

La energía potencial eléctrica entre la carga, Q₁ y Q₂= -81,000 J

b. El potencial eléctrico de Q₁ en Q₂, V₁ = [tex]k \times \dfrac{Q_1 }{r}[/tex]

Por lo tanto, V₁ = 9.0×10⁹ × 24 × 10⁻³/0.032 = 6.75 × 10⁹

El potencial eléctrico de Q₁ en Q₂, V₁ = 6.75 × 10⁹ V

A spacecraft orbits the Earth at height of 1600km. Calculate the escape velocity for the spacecraft.
[G= 6.67×10^-11Nm^2kg^-2, mass of the Earth= 5.97×10^24kg, radius of the Earth= 6.37×10^6m]​

Answers

Answer:

what do u need help with

Explanation:

Calculate the escape velocity for the spacecraft. [G= 6.67×10^-11Nm^2kg^-2, mass of the Earth= 5.97×10^24kg, radius of the Earth= ...

Squids rely on jet propulsion to move around in water. A 1.5 kg squid at rest suddenly expels 0.12 kg of water backward to quickly get itself moving forward at 2.8 m/s. If other forces (such as the drag force on the squid) are ignored, what is the speed with which the squid expels water

Answers

Answer:

The speed of water is 32.2 m/s .

Explanation:

Mass of squid, M = 1.5 kg

mass of water, m = 0.12 kg

velocity of squid, V = - 2.8 m/s

Let the speed of water is v.

Use the conservation of momentum,

Momentum before expelling the water  momentum after expelling water

M x 0 = (M - m) x V + m x v

0 = - (1.5 - 0.12) x 2.8 + 0.12 v

3.864 = 0.12 v

v = 32.2 m/s

Object A has a mass of 5 kg and a velocity of 6 m/s to the east while Object 1 point B has a mass of 12 kg and velocity 0.6 m/s also to the east. What is the momentum of the system? (Let east be positive)
help plss I got family

Answers

Answer:

Momentum of system = 37.2 Kgm/s.

Explanation:

Given the following data;

Mass A = 5 kgVelocity A = 6 m/sMass B = 12 kgVelocity B = 0.6 m/s

To find the momentum of the system;

Momentum can be defined as the multiplication (product) of the mass possessed by an object and its velocity. Momentum is considered to be a vector quantity because it has both magnitude and direction.

Mathematically, momentum is given by the formula;

Momentum = mass * velocity

For object A;

Momentum A = 5 * 6

Momentum A = 30 Kgm/s

For object B;

Momentum B = 12 * 0.6

Momentum B = 7.2 Kgm/s

Next, we would determine the momentum of this system using the formula;

Momentum of system = Momentum A + Momentum B

Substituting the values into the formula, we have;

Momentum of system = 30 + 7.2

Momentum of system = 37.2 Kgm/s.

the power station uses some of its waste thermal energy to hear water for houses in a nearby town. State one problem of using waster energy in this way if the power station is far from town. Suggest a way of reducing this problem​

Answers

Answer:

Explanation:

By the time the hot water gets to the place where it can be used for heating, it will have lost a great deal of energy to the surroundings.

The way to prevent that from happening is to insulate the pipeline with fiber glass like house insulation. Of course since this is a physics question and not an engineering problem, you could move the power station closer to the houses to be heated.

The use of Insulating Layers with low Conduction Coefficients and radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

The main problem of Transportation of Waste Energy through Long Distances is the heat transfer between the Fluid flowing through the Tube and Surroundings. Heat Losses are directly proportional to the Distance travelled by the Fluid.

A possible way to minimize this Problem is to isolate outer surface of Tubes with materials with low Conduction Coefficients. at Critical Radius, in which Heat Losses reach its theoretical Maximum, from which Heat Transfer tends to diminish at greater radii.

According to the Theory of Heat Transfer, the Critical Radius of the Insulating Layer is equal to:

[tex]r_{c} = \frac{k}{h}[/tex] (1)

Where:

[tex]k[/tex] - Conduction coefficient, in watts per meter-Kelvin.[tex]h[/tex] - Convection coefficient, in watts per square meter-Kelvin.

Using materials with low Conduction Coefficient minimize Thickness requirements and, therefore, overall costs tends to sink when [tex]r > r_{c}[/tex].

Hence, the use of Insulating Layers with low Conduction Coefficients and Radii greater than Critical Radius diminish Losses and gives important Savings in terms of Energy Efficiency.

An ant moves towards the plane mirror with speed of 2 m/s & the mirror is moved towards the ant with the same speed. What is the relative velocity between the ant and its image?​

Answers

Speed of ant-V_a=2m/sSpeed of mirror =v_b=2m/s

We know

[tex]\boxed{\sf Relative\:velocity(V_{AB})=V_A-V_B}[/tex]

[tex]\\ \sf\longmapsto V_{AB}=2-2[/tex]

[tex]\\ \sf\longmapsto V_{AB}=0m/s[/tex]

The vector difference between the velocities of two bodies : the velocity of a body with respect to another regarded as being at rest  compare relative motion

[tex]Relative velocity $\left(\mathrm{V}_{\mathrm{AB}}\right)=\mathrm{V}_{\mathrm{A}}-\mathrm{V}_{\mathrm{B}}$$$\begin{aligned}&\longmapsto \mathrm{V}_{\mathrm{AB}}=2-2 \\&\longmapsto \mathrm{V}_{\mathrm{AB}}=0 \mathrm{~m} / \mathrm{s}\end{aligned}$$[/tex]

What is relative velocity and its unit?

The relative velocity of an object with respect to another is the velocity with which one object moves with respect to another object. The unit of velocity can be referred to as the ratio of unit of distance and that of time. The SI unit of Relative velocity is meter per second.

What is absolute velocity?

The concept of absolute velocity is mainly used in turbomachinery design and defines the velocity of a fluid particle in relation to the surrounding, stationary environment. Together with the relative velocity (w) and the circumferential speed (u), it forms the velocity triangle.

To learn more about relative velocity, refer

https://brainly.com/question/24430414

#SPJ2

A solenoid passing by a current of 5.0 A generates a magnetic field at its diameter of 50 μT. Thus the number of spirals per length scale is:

A. 5.0 / π Spear / m

B. 10 / π Spear / m

C. 20 / π Spear / m

D. 25 / π Spear / m

Answers

Answer:

D. 25 / π Spiral / m

Explanation:

Given;

current, I = 5 A

magnetic field strength, B = 50 μT = 50 x 10⁻⁶ T

The magnetic field strength is given as;

[tex]B = \mu_0 nI\\\\where;\\\\\mu_0 \ is \ permeability \ of \ free \ space = 4\pi \times 10^{-7} T/A.m\\\\n \ is \ the \ number \ of \ spirals \ per \ length\\\\n = \frac{B}{\mu_0 I} = \frac{50 \times 10^{-6}}{5\times 4\pi \times 10^{-7}} = \frac{25}{\pi } \ spirals /m \\\\[/tex]

Therefore, the correct option is D. 25 / π Spiral / m

describe the forest ecosystem with examples​

Answers

A forest ecosystem describes the community of plants, animals, microbes and all other organisms in interaction with the chemical and physical features of their environment: Specifically, a terrestrial environment dominated by trees growing in a closed canopy — a forest, in other words.

Hope this helps you buddy! :)

What comes before Action-reaction?

Answers

These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction. The statement means that in every interaction, there is a pair of forces acting on the two interacting objects.

Two rams run toward each other. One ram has a mass of 44 kg and runs south with a speed of 6 m/s, while the other has a mass of 50 kg and runs north with a speed of 3 m/s. What will the momentum of the system made up of the two rams be after they collide? Assume the total momentum of the system is conserved.
A. 114 kg-m/s south
B. 414 kg-m/s south
C. 414 kg m/s north
D. 114 kg-m/s north

Answers

Answer = D. 114 kg-m/s north

A car and a truck collide in an intersection and the merged wreck continues along. During the collision. both kinetic energy and momentum are conserved.B. neither kinetic energy not momentum is conserved.C. momentum is conserved but not kinetic energy.D. kinetic energy is conserved but not momentum.E. conservation depends upon the details of the collision.

Answers

Answer:

C. Momentum is conserved but not kinetic energy.

Explanation:

This case represents an entirely inelastic collision, that is, a collision between the car and the truck that reduces total kinetic energy of the entire system, whereas linear momentum is conserved. Hence, correct answer is C.

An astronaut on Pluto attaches a small brass ball to a 1.00-m length of string and makes a simple pendulum. She times 10 complete swings in a time of 257 seconds. From this measurement she calculates the acceleration due to gravity on Pluto. What is her result

Answers

Answer:

The acceleration due to gravity at Pluto is 0.0597 m/s^2.

Explanation:

Length, L = 1 m

10 oscillations in 257 seconds

Time period, T = 257/10 = 25.7 s

Let the acceleration due to gravity is g.

Use the formula of time period of simple pendulum

[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]

in a cathode-ray tube, particles are fired at the screen. What are these particles

Answers

Thomson's experiments with cathode ray tubes showed that all atoms contain tiny negatively charged subatomic particles or electrons.

A 750 kg National Geographic Drone is rising vertically up into the atmosphere at constant speed. The lift force pushing it upward is 125% of its weight. The drone reaches the cruising speed almost immediately. It takes 25 seconds for the drone to reach a height of 250m starting from the surface.
a. What is the mechanical energy of the drone at the surface?
b. What is the mechanical energy of the drone at the 150 m height?
c. Is the mechanical energy of the drone conserved, increased, or decreased. Explain your choice.
d. What is the work done by each force acting on the drone?

Answers

Answer:

a. 0

b. 1.103625 MJ

c. Conserved

d. 1.103625/n MJ where n = The number of forces

Explanation:

The mass of the drone, m = 750 kg

The upward lift force = 125% of the weight of the drone

The time it takes the drone to reach a height of 250 m = 25 seconds

a. The mechanical energy = The kinetic energy + Potential energy

Therefore, given that the drone stars motion from the surface and was initially at rest, the mechanical energy at the surface = 0

b. The mechanical energy at height, h = 150 m, ME₁₅₀ = The potential energy gained = m·g·h

Where;

g = The acceleration due to gravity = 9.81 m/s²

∴ ME₁₅₀ = 750 kg × 9.81 m/s² × 150 m = 1103625 J = 1.103625 MJ

c. The mechanical energy is equivalent to the potential energy of the drone at the 150 m height, therefore, it is conserved

d. The work done by the force = The energy gained

Therefore, where there are n number of forces, the work done by each force = 1.103625/n MJ

e. write unit of the following physical quantities

Answers

Answer:

electric current=ampere(A)

force=Newton (N)

area=metres square(m^2)

power=watt(w)

density=kg/m3 

amount of substance =mole per cubic meter (mol/m3).

volume=cubic meter (m3),

Answer:

thanks for brainlist brother.........

magnetised hacksaw blade is cut into two pieces..can there be two poles on both sides??​

Answers

Answer:

yes

Explanation:

because the dipoles are not arrange the same way they were in the full hacksaw

The needle in the following diagram rotates around a fixed point in the middle. Based on the information given, what way will the needle rotate when the current is applied?

Answers

Answer:

nods 40th anniversary rid off e 49en9 snns

The mass of earth 6*10^24kg its radius is 6.4*10^3km now calculate due to gravity on earth

Answers

Answer:

Explanation:

in your textbook, they have a formula like this:

g=mass of earth*G/R^2

G=6.67*10^-11

apply to this

we have g=6*10^2*4*6.67*10^-11/(6.4*10^3*1000)^2=9.78

Two Carnot air conditioners, A and B, are removing heat from different rooms. The outside temperature is the same for both rooms, 314 K. The room serviced by unit A is kept at a temperature of 292 K, while the room serviced by unit B is kept at 298 K. The heat removed from either room is 4430 J. For both units, find (a), (b) the magnitude of the work required and (c), (d) the magnitude of the heat deposited outside for A and B conditioners respectively

Answers

Answer:

(a)  333.77 J

(b) 237.85 J

(c) 4763.77 J

(d) 4667.85 J

Explanation:

Temperature of source, TH = 314 K

Temperature of A, Tc = 292 K

Temperature of B, Tc' = 298 K

heat taken out, Qc = 4430 J

Let the heat deposited outside is QH and QH' by A and B respectively.

[tex]\frac{Q_H}{Q_c}=\frac{T_H}{T_c}\\\\Q_H = \frac{4430\times314}{292}=4763.77 J[/tex]

Now

[tex]\frac{Q_H'}{Q_c}=\frac{T_H}{T_c'}\\\\Q_H' = \frac{4430\times314}{298}=4667.85 J[/tex]

(a) Work done for A

W = QH - QC = 4763.77 - 4430 = 333.77 J

(b) Work done for B

W' = QH' - Qc = 4667.85 - 4430 = 237.85 J

(c) QH = 4763.77 J

(d) QH' = 4667.85 J

hai vật chuyển động ngược chiều qua A với B cùng lúc, ngược chiều để gặp nhau . Vật qua A có vận tốc 10m/s, qua B có vận tốc 15m/s. AB=100m
a, lấy trục tọa độ là đường thẳng AB, gốc tọa độ ở B , có chiều dương từ A sang B , gốc thời gian là lúc chúng cùng đi qua A và B . Lập phương trình chuyển động của hai xe
b, xác định vị trí , thời điểm 2 xe gặp nhau
c, xác định vị trí , thời điểm 2 xe cách nhau 25m

Answers

Answer:

wah wats this again

Explanation:

Bhai mujhe samaj nahi ah Raha

Kya Bolne Chahtaa hu tum

Answer:

bạn vẽ ra rồi làm

Explanation:

A bullet of mass of 50g is moving with the velocity of 200km/h .calculate the kinetic energy of the bullet .​

Answers

Not sure if this it completely right but here’s what I got: 77.16050617284 J

Answer:

is 10³

Explanation:

cuz the formula of KE is 1/2mv²

covert 50g to kg first then plug in the formula

1/2 × 0.05 × 200 = 10³ J

A spring has a spring constant of 5 N/m and is stretched 10 m. What its U,?
a. 50 J
b. 70 J
c. 90 J
d. 250 J

Answers

Answer

I am not sure but it is may be 50J

I hope that's, this answer is fine.

Water falls down as a stream from a tap. Why does it not scatter?​

Answers

Answer:

as it hits the ground it's dispersed and this causes it to move in different directions

The image shows a landform created by Earth’s forces.

A dip in a mountain range between two plates.

Which describes this landform?

anticline
shearing
syncline
tension

Answers

The term that best describes the landform "dip in a mountain range" is C. Syncline.

Syncline is a term to refer to a fold of the Earth's crust caused by the tectonic effects of the earth's dynamics. A synclinal fold is characterized by being a concave fold, that is, in the shape of a U.

According to the above, answers A, B and D are not correct options because they refer to different shapes of the Earth. Therefore, the landform shown is syncline.

Learn more at: https://brainly.com/question/17137827

Answer: C

Explanation: E2022

Other Questions
which best describes nuclear energy?A the energy that matter has due to the vibrations of its particlesB the energy an object has due to its chemical bondsC the energy generated by a flow of electronsD the energy stored inside the center of an atom write an equation for a line that is perpendicular to 2x - 4y = 10 CUSTOMERS AT A STOREThe bar graph above shows the number of customers who shopped at a store Monday through Thursday ofone week. If the number of customers on Friday was a one-fifth increase over the number of customers onThursday, how many customers shopped at the store on Friday?O 480O 500O 525O 600 Mrs. Albert has three times as many gladiolas as Mr. Haas. Together they have 128 gladiolas. How many gladiolas does Mrs. Albert have? a-1/3 =3/4what is a In many cartoon shows, a character runs of a cliff, realizes his predicament and lets out a scream. He continues to scream as he falls. If the physical situation is portrayed correctly, from the vantage point of an observer at the foot of the cliff, the pitch of the scream should be Group of answer choices Period 1 (1491 to 1607)Write the Definitions of the following:-Maize cultivation-Pueblo culture-Fremont culture-Semi-nomadic-Mississippian culture-Iroquois Confederacy-Chinook-Chumash-Reconquista-Conquistadores-The Black Legend-Northwest Passage-The Columbian Exchange -Caravel-Compass and quadrant -Jointstock trading company -Smallpox epidemics-Introduction of horses-Encomienda system-Repartimiento system-African slave traders-Spanish caste system-Mestizo-Mulatto-Animism-Communal stewardship of land -Roanoke-North American Fur Trade-Juan de Sepulveda-Bartolome de Las Casa Please help explanation if possible Guided PracticeFind the first, fourth, and eighth terms in the sequence.an=5 3n1a subscript n baseline equals negative 5 times 3 superscript n minus 1 baselineA.15; 405; 32,805B.5; 135; 10,935C.5; 135; 10,935 What does union mean in a statistics problem? I need helpppp please I dont understand this question at alll which is not a common theory on how the effects of hypnosis occurs A spinner is divided into 4 equal sections numbered 1 through 4. It is spun twice, and the numbers from each spin are added.What is the probability that the sum is less than 6?0.5630.7140.6250.750 Find the missing number.____ 7 = 91please help me The following data relate to direct labor costs for August: actual costs for 5,500 hours at $24.00 per hour and standard costs for 5,000 hours at $23.70 per hour. The direct labor rate variance is a.$1,500 unfavorable b.$1,500 favorable c.$1,650 unfavorable d.$1,650 favorable please help me find what equals to x BRAINLIEST + 20 POINTSSelect the correctly punctuated absolute phrase from the drop-down menu to add it to the sentence.Seora Alvarez waited excitedly for her guests to arrive _____________.A. ,her house bedecked, garlands of flowers.B. her house bedecked, in garlands of flowers.C. ,her house bedecked in garlands of flowers.D. her house bedecked in garlands of flowers. (-1,6),(3,-4) find the slope and y intercept. The electronic arrangement of an atom shows how electrons are distributed across the different energy levels. Which of the following elements is represented by the electron arrangement 2, 8, 18, 6? a B. Mg C. S D Se E. Ga An analyst has decided to identify value stocks for investment by screening for companies with high book-to-market ratios and high dividend yields. A potential drawback of using these screens to find value stocks is that the firms selected may: be those that have significantly underperformed the market. be concentrated in specific industries. have unsustainable dividend payments.