Answer: no
Explanation:
Atoms are not and have never been alive so they can't be considered dead. they simply do not meet any reasonable of life, primarily because they are not complex.
What is important about the properties of a substance that has undergone a chemical
change?
The substances created during chemical reactions, on the other hand, do not simply revert to their initial state. The most essential thing to remember is that the makeup of a material does not change when it undergoes a physical change, but it does change when it undergoes a chemical change.
Answer:
the most important thing for you to remember is that in a physical change composition of a substance does not change and in a chemical change the composition of a substance does change
Which example accurately describes a solution? (1 point)
Nonpolar oil molecules dissolve in water, which is polar.
Polar sugar molecules dissolve in water, which is polar.
Nonpolar fat molecules dissolve in water, which is polar.
Polar sugar molecules dissolve in oil, which is nonpolar.
The example which accurately describes a solution is; Polar sugar molecules dissolve in water, which is polar.
According to the question:
We are required to determine Which example accurately describes a solution.The formation of a solution requires that the solvent and solute be of the same polarity.
In essence, the example which accurately describes a solution is; Polar sugar molecules dissolve in water, which is polar.
Read more on solutions and polarity:
https://brainly.com/question/9485955
Answer:
Polar sugar molecules dissolve in water, which is polar.
Explanation:
I did the Exam and got it right!
A 0.1 M NaCl solution and a 0.2 M glucose solution are separated by a membrane that is impermeable to these solutes but is permeable to water. What will happen
nothing will happen
if you calculate the water potiential for both solutions
you get 2(0.1)(R)(T) and 1(0.2)(R)(T)
which is the same thing, so its isotonic.
6. The valence number of a metallic element x is 3. What is the chemical formula of its B. Nitride?
A baker was baking a cake which has burnt due to over heating. What kind of change is this ?
reversible
irreversible
burnt
heating
What is the molarity of the nitric acid solution if 20.5 mL of a 0.125 M lithium hydroxide solution are needed to titrate a 25.0 mL sample of the nitric acid solution
Answer:: We're asked to find the molar concentration of the NaCl solution given some titration data.
Explanation:
What is the molarity of a NaOH solution when 22.14 mL of 0.105 M oxalic acid is needed to
neutralize 25.0 mL of the base.
The molarity of the NaOH solution required for the reaction is 0.186 M
We'll begin by writing the balanced equation for the reaction
H₂C₂O₄ +2NaOH —> Na₂C₂O₄ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂C₂O₄ (nA) = 1
The mole ratio of the base, NaOH (nB) = 2
From the question given above, the following data were obtained:
Volume of the acid, H₂C₂O₄ (Va) = 22.14 mL
Molarity of the acid, H₂C₂O₄ (Ma) = 0.105 M
Volume of the base, NaOH (Vb) = 25 mL
Molarity of the base, NaOH (Mb) =?MaVa / MbVb = nA/nB
(0.105 × 22.14) / (Mb × 25) = 1/2
2.3247 / (Mb × 25) = 1/2
Cross multiply
Mb × 25 = 2.3247 × 2
Mb × 25 = 4.6494
Divide both side by 25
Mb = 4.6494 / 25
Mb = 0.186 MTherefore, the molarity of the base, NaOH solution is 0.186 M
Learn more: https://brainly.com/question/25739717
The frequency light of 3.52*10-7
Answer:
The speed of light, c, equals the wavelength, λ (pronounced lambda), times the frequency, ν, (pronounced noo).
c=λν
c is a constant. It is usually given as 3.00×108 m/s or 3.00×1010 cm/s rounded to three significant figures.❤
What is the percentage of nitrogen in ammonium chloride (NH4Cl)?
Answer:
25%
Explanation:
Ammonium Chloride NH4CI Fertilizer-grade NH4Cl usually contains 25% N. About two-thirds of the world capacity for manufacture of this material is located in Japan, with the remaining one-third situated in India and China.
What types of orbitals are found in the third energy level?
Answer:
1 s-orbital, 3 p-orbital and 5 d-orbital
Answer:
there are a total of nine orbitals in a third energy level
Explanation:
when a 2.71 mL sample of a 0.493 M aqueous nitrous acid solution is tutorage with a 0.308 M aqueous sodium hydroxide solution, what is the ph after 65.1 mL of sodium hydroxide have been added?
Answer:
0.10 M NaHA
Explanation:
What are the two elements sand is made of? *
Answer:
tiny crystals of the mineral quartz, which is made out of silica and oxygen
Well, much of the world's sand is made out of the same stuff, tiny crystals of the mineral quartz, which is made out of silica and oxygen, the two most common elements in Earth's crust.
Complete the balanced dissociation equation Cs2CO3
The balanced dissociation equation for Cs₂CO₃ is:
Cs₂CO₃(aq) —> Cs⁺(aq) + CO₃²¯(aq)
A dissociation equation is an equation showing the available ions present in a solution.
To obtain the dissociation equation, the compound must be dissolved in water to produce an aqueous solution.
The dissociation equation for Cs₂CO₃ can be written as follow
Cs₂CO₃(aq) —> Cs⁺(aq) + CO₃²¯(aq)
Learn more about dissociation equation: https://brainly.com/question/1903354
periodicity in chemical properties is based on atomic structure." explain.
Answer:
Periodicity is caused by regular and predictable variations in element atomic structure. ... The rows in the periodic table (the periods) reflect the filling of electrons shells around the nucleus, so when a new row begins, the elements stack on top of each other with similar please help me rank up
Periodicity means the repeating trends in properties of elements in a regular interval. Precocity in chemical properties depends on the atomic structure because, the size, number of electrons, etc affects their reactivity.
What is periodicity?Periodicity is the repetition in in trends in properties after a regular interval. In periodic table, all the elements are classified into different groups and periods.
Groups are vertical columns containing elements of same number of valence electrons and similar chemical and physical properties. Periods are horizontal rows where elements are arranges in the increasing order of atomic number.
Along a period the atomic size decreases, ionization energy and electronegativity increases. But down a group just the reverse for this happens.
In a chemical reaction only valence electrons are participating and the size and number of valence electrons etc affects the chemical reactivity of elements. That's why it is said like periodicity in chemical properties is based on the atomic structure.
To find more on periodicity, refer here:
https://brainly.com/question/16061498
#SPJ2
Acid hydrolysis of N-methylbutyramide in water and hydrochloric acid with heat produces______________________________.
a. Butyric acid and methylammonium chloride.
b. Butanoic acid and ammonium chloride.
c. Butanoate and methylamine.
Answer:
A- Butyric acid and methylammonium chloride.
Explanation:
The model below shows the equation that represents how hydrogen and oxygen combine to form water. In this chemical reaction, the reactants
are hydrogen gas and oxygen gas.
2H2 + O2 + 2H2O
True
False
Answer:
true
Explanation:
because they are balance
using the formula F=ma, what force is required to accelerate a car weighing 642 kg at 13 m/s2
REALLY NEED HELP RN
HELP ME ?
PLEASE!??
Answer:
8,346 kmxm/s2
Explanation:
this is physics not chem but you just multiply 13 by 642 to get 8,346. also I'm sorry but it's easy
a meter is defined as 100. cm. How many significant digits are there in the value
Answer:
3 significant figure
Explanation:
Trailing zeros in a number are significant ONLY is the number contains a decimal point.
So if it was 100cm with out the decimal point would only have 1 significant figure.
milk is heterogeneous mixture why
Answer:
Milk is essentially a colloidal dispersion of fat in water. ... However, the fact remains that the fat and water components cannot be mixed together from a solution. There are therefore, two distinct immiscible liquid phase's present, which is why it is a heterogeneous mixture.
If the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture in a buret
Answer:
f the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture
Partial pressure of H2 in gas mixture is :
739.765 torr .
Explain total pressure?The overall pressure ptot is the total of all pressures in a reference system. This pressure, according to Bernoulli (see Fluid mechanics), consists of the static pressure p, the dynamic pressure pdyn, and the geodetic component ( g z) that exists in a fluid along a stream line in a frictionless flow.The total pressure of a gas mixture is the sum of its component gases' partial pressures: Ptot = ∑Pi = P1 + P2 + P3... ntot = total number of moles in the gas mixture (the sum of all ni).Total pressure of mixture =
Partial of hydrogen + Partial pressure of oxygen
Partial of Hydrogen = Total pressure - partial pressure of oxygen
Here total pressure = 757.3 torr
Partial pressure of oxygen = 17 . 535 torr
Total pressure = 757 . 3 - 17 . 533
= 739.765 torr.
To learn more about total pressure refer to :
https://brainly.com/question/22264785
#SPJ2
When 2.0 mol of methanol is dissolved in 45 grams of water, what is the mole fraction of methanol
The mole fraction of methanol in the mixture is 0.444
We'll begin by calculating the number of mole of water.
Mass of water = 45 gMolar mass of water = 18 g/molMole of water =?Mole = mass / molar mass
Mole of water = 45 / 18
Mole of water = 2.5 moles
Finally, we shall determine the mole fraction of methanol.
Mole of water = 2.5 molesMole of methanol = 2 molesTotal mole = 2 + 2.5 = 4.5 molesMole fraction of methanol =?
Mole fraction = mole / total mole
Mole fraction of methanol = 2 / 4.5
Mole fraction of methanol = 0.444
Thus, the mole fraction of methanol is 0.444
Learn more about mole fraction:
https://brainly.com/question/15444997
If 9 moles of P203 are formed, how many
moles of O2 reacted?
Which functional group does the molecule below have?
Answer:
B
Explanation:
We can see here that the functional group that the molecule have is: B. Carbonyl
What is a functional group?A functional group is a specific group of atoms or bonds within a molecule that is responsible for the characteristic chemical reactions and properties of that molecule. Functional groups are the parts of organic molecules that determine their reactivity and the types of chemical reactions they can undergo.
In organic chemistry, functional groups play a crucial role in understanding the structure and behavior of molecules. Different functional groups confer distinct properties to molecules, influencing their physical properties, solubility, acidity or basicity, and interactions with other molecules.
Learn more about functional group on https://brainly.com/question/10058230
#SPJ2
1 point
Convert 3.79 x 10^24 atoms of sodium to grams.
Answer:
is easy to poiling
Explanation:
also is dificult to melting
Draw and Name the Cis- isomer for the following compound:
CH3 - CH = CH - CH2 - CH3
Answer:
Cis-2-pentene or Z-2-pentene
An aqueous solution was prepared by dissolving 266.07 g of AgNO3 ( 169.88 g/mol) in enough water to make a total volume of 250.0 ml. What is the molarity of the solution
Answer:
The correct answer is 6.265 M.
Explanation:
To find the molarity of the solution, we first must recall that molarity represents the number of moles of solute divided by the number of liters of solution. Thus, our first step should be to convert the solute amount in grams to moles, using the given molar mass.
266.07 g * (1 mol/169.88 g) = 1.5662 mol
Now, we can find the molarity using the following formula:
Molarity = moles solute/liters solution
M = 1.5662 mol/0.25 L
M = 6.265 M
Therefore, the molarity of the solution is 6.265 M.
Hope this helps!
If 0.45 mole oxygen gas occupies a volume of 1.5 L, what volumes will 2.0 moles of oxygen gas occupy at the same temperature and pressure?
please don't send YouT8ube link i need a solution
Answer:
1. How many moles of oxygen will occupy a volume of 2.5 liters at 1.2 atm and 25° C? PV = V (1.2 n. 0821) (298) = 123 mols 2.
2.0 moles of oxygen gas will occupy a volume of 6.67 L at the same temperature and pressure.
Moles is a unit of measurement used in chemistry to express the amount of a substance. It is a counting unit that represents the number of particles, such as atoms, molecules, or ions, in a given sample.
One mole of a substance is defined as the amount of that substance that contains Avogadro's number of particles, which is approximately 6.022 x 10²³. This number is based on the concept that atoms, molecules, and ions are extremely small and difficult to count individually, so using moles allows for a more practical and convenient representation of quantities.
Given:
Moles of oxygen gas (initial) = 0.45 mol
Volume of oxygen gas (initial) = 1.5 L
Moles of oxygen gas (final) = 2.0 mol
Volume of oxygen gas (final) = ?
Using the principle of molar volume, we can set up the following ratio:
(0.45 mol / 1.5 L) = (2.0 mol / V)
V = (1.5 L × 2.0 mol) / 0.45 mol
V = 6.67 L
Learn more about Moles, here:
https://brainly.com/question/26416088
#SPJ6
Electrical bonding refunding quick check!!
A team wants to understand the effects of molecular weight on boiling point. The team has access to five substances with
different molecular weights and the time to measure 50 boiling points. How can the team make the best use of the laboratory
testing time? (1 point)
O by taking 10 measurements of each of the five liquids and using the highest value from each set
O by taking 10 measurements of each of the five liquids and finding an average
O by taking measurements of the liquids one at a time, making sure that the correct results are achieved before
moving on to another liquid
O by taking one measurement of each liquid and then working to improve the least certain liquid in the group
Answer:
1. More data should be collected to get a more reliable average
2. A boiling point at 1.5 atmospheres could be predicted fairly well
3. The actual boiling point is probably between 34 C and 40 C
4. By taking 10 measurements of each of the five liquids and finding an average
5. The thermometer being used might need to be recalibrated
Explanation:
Took the quick check
List the four quantum numbers
Answer: In atoms, there are a total of four quantum numbers: the principal quantum number (n), the orbital angular momentum quantum number (l), the magnetic quantum number (ml), and the electron spin quantum number (ms).
Answer:
(n)
(i)
(mı)
(ms) s is suppose to be smaller than the m
Explanation:
the principal quantum number (n)
the orbital angular momentum quantum number (I)
the magnetic quantum number (ml)
the electronic spin quantum number (ms)
Octane has a density of 0.703 g/ml. Calculate the mass of CO2(g) produced by burning one
gallon of octane. There are 3.79 liters to one gallon.
The mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.
The given parameters:
Density of the octane, ρ = 0.703 g/mlVolume of octane, v = 3.79 litersThe mass of the octane burnt is calculated as follows;
[tex]m = \rho V\\\\m = 0.703 \ \frac{g}{ml} \times 3.79 \ L \ \frac{1000 \ ml}{L} \\\\m = 2,664.37 \ g[/tex]
The combustion reaction of octane is given as;
[tex]2C_8H_{18} + \ 25O_2 \ --> \ 16CO_2 \ + \ 18H_2O[/tex]
From the reaction above:
228.46 g of octane -------------------> 704 g of CO₂ gas
2,664.37 of octane --------------------> ? of CO₂ gas
[tex]= \frac{2,664.37 \times 704}{228.46} \\\\= 8,210.3 \ g\\\\= 8.21 \ kg[/tex]
Thus, the mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.
Learn more about combustion of organic compounds here: https://brainly.com/question/13272422
