Answer:
add baking soda maybe
Explanation:
Answer and Explanation
__________________________________________________________
All of the Information below is not owned by me, it is owned by CCBCMD.
__________________________________________________________
Colas are also carbonated beverages. The carbonation can produce some carbonic acid in the Cola, which would affect your results. Therefore, to ensure that you are only titrating the phosphoric acid you will use de-carbonated soda. This can easily be obtained by gently heating the soda, or as you may already know, by rapidly shaking the bottle. It is also important that we do not use diet Colas since the artificial sweeteners that they contain have acidic functional groups that will also interfere with the titration.
__________________________________________________________
1Use a 25.00-mL pipet to deliver exactly 25.00 mL of room temperature, de-carbonated
Cola into a 250-mL beaker. Check out a magnetic stir bar and gently add it to the
beaker. Place the beaker on a stir plate. Set up a pH meter so that the probe is completely immersed, but in a way that the stir bar will not hit it. The tip of the probe
has a thin glass membrane. Handle it with care! Position the beaker so that the stir bar
is as close to the center of the beaker as possible for optimal stirring. It should stir
rapidly enough to ensure thorough mixing but not so rapidly as to cause splattering.
__________________________________________________________
2Obtain about 75 mL of 0.0100 M NaOH in a beaker. Use this NaOH to fill a buret.
Remember that you should always rinse a buret 2-3 times with the solution that you are
about to put into it and remove air bubbles at the buret tip. If you do not remember how
The initial level of the NaOH should be at exactly
0.00 mL. Once the buret is ready, place it over the beaker containing the Cola
__________________________________________________________
Hope this helps! <3
__________________________________________________________
why do boys my age not like me ?
Answer:
Because boys are overrated
Explanation:
Answer:
id.k, I've been asking myself the same thing.
Explanation:
-_-
which cycle results in death of the host cell
A.lytic cycle
B.lysogenic cycle
C.both
Answer:
A. lytic cycle is the correct answer
True or False? When a gas condenses to a liquid it absorbs heat from its
surroundings.
1.True
2.False
Answer:
True
Explanation:
because it never stops doing it
Which of the following statements does not describe a physical property of chlorine?
O The color of chlorine gas is green.
O The density of chlorine gas at standard temperature and pressure is 3.17 g/L. OChlorine combines with sodium to form table salt.
O The freezing point of chlorine is -101°C.
Answer:
the chlorine gas is green
Explanation:
the density of
Therefore, the first option A is correct.
Learn more at :https://brainly.com/question/18327661?referrer=searchResults
Help please!! I'll name you brainliest!!
Answer:
magesium di chloride
Explanation:
it has one magnesium and 2 chlorines
Answer:
Magnesium Chloride
CuSO4 +
KI →
Cul +
12 +
K2SO4
Consider the reaction and the rate law below.
2O3 → 302
R= k[03]2
What is the overall order of the reactants in this rate law?
A. 0
B. 1
C. 2
D. 3
The overall order of the reactants in this rate law : 2
Further explanationGiven
Reaction
2O3 → 302
The rate law :
R= k[03]²
Required
The overall order
Solution
The overall order : the sum of orders for each reactant
For A + B ---> C + D
r = k [A]ᵃ[B]ᵇ
The overall reaction order is m+n
So for the rate law of R= k[03]², the overall order = 2
Consider the rate law below.
R=k[A]2
What effect does doubling the concentration have on the rate?
A. doubles the rate
B. triples the rate
C. quadruples the rate
D. no effect on the rate
C. quadruples the rate
Further explanationGiven
The rate law :
R=k[A]²
Required
The rate
Solution
There are several factors that influence reaction kinetics :
1. Concentration 2. Surface area 3. Temperature 4. Catalyst 5. Pressure 6. StirringThe rate is proportional to the concentration.
If the concentration increased, the reaction rate will increase
The reaction is second-order overall(The exponent is 2)
The concentration of A is doubled, the reaction rate will increase :
r = k[A]² ⇒ r= k[2A]²⇒r=4k[A]²
The reaction rate will quadruple.
transfer of energy by electromagnetic -science question
A.conduction
B.convection
C.radiation
D.reflection
Answer:
B. convention
Explanation:
hope you get the right answer
What is a poverty line?
1. How many moles of Boron is 1.25 x 1023 atoms of Boron? *
O 0.208 mol B
0 7.53 x 1046 mol B
O 1.35 x 1025 mol B
0 4.82 mol B
Answer:
0.208 mol B
Explanation:
There are 6.02 × 10^23 atoms in one mole of a substance, according to Avagadro's law.
According to this question, there are 1.25 x 10^23 atoms of Boron. This means that the number of moles in the Boron atom can be calculated thus:
number of moles (n) = number of boron atoms (nA) ÷ Avagadro's number
n = 1.25 x 10^23 ÷ 6.02 × 10^23
n = 0.2076 × 10^(23-23)
n = 0.208 × 10^0
n = 0.208 × 1
n = 0.208 moles of Boron
What is the mass of 0.55 mole
of magnesium chloride?
Answer:
SYMBOLS, FORMULAS AND MOLAR MASSES
OBJECTIVES
1. To correctly write and interpret chemical formulas
2. To calculate molecular weights from chemical formulas
3. To calculate moles from grams using chemical formulas
INTRODUCTION
Part I. Symbols and formulas
An element is a homogeneous pure substance made up of identical atoms. All matter is made
up of elements and, since chemistry is the study of matter, it is convenient to use symbols to represent
the elements rather than using the entire name.
By international agreement, specific symbols are assigned to each element (Note: This means
that while names of the elements vary with language, symbols are constant throughout the world.) Each
element is assigned a one- or two-letter symbol. The first letter is capitalized, the second (if there is
one) is not. While this often seems trivial, it is in fact a very important point. For example, in chemical
language Co represents cobalt, which is a metal and an element, while CO represents carbon monoxide,
a compound which is a colorless, odorless gas! Even when there is not an obvious correspondence,
for instance "MN", it can cause confusion. Do you mean the element manganese? Did you forget a
letter and mean something else? Are you using "M" to represent something else entirely? Chemists
sometimes use "M" to represent any metal. It is well worth the trouble to memorize the symbols for
common elements.
Since compounds consist of elements, the chemical formulas of compounds also consist of
elements with subscripts used to denote the number of atoms per molecule. If there is no subscript, it is
implied that there is one of that kind of atom. Ones never appear in chemical formulas. Not only do
subscripts denote ratios of atoms, they also denote the ratio of moles of element to one mole of
compound. Parentheses can be used to show groups of atoms, with the subscripts showing how many
groups there are. Parentheses are not used if there is only one group.
Examples: For one mole of the following compounds, how many moles of each element are
present?
MgCl2 1 mole Mg, 2 moles Cl
Mg(NO3)2 1 mole Mg, 2 moles N, 6 moles O
NaNO3 1 mole Na, 1 mole N, 3 mole O
AgCl 1 mole Ag, 1 mole ClPart II. Molar Masses
Each atom has a different size and therefore a different mass. The relative masses of each
element can be found on the periodic table. For example, one atom of magnesium weighs 24.31 amu
(atomic mass units). However, one mole of magnesium weighs 24.31 g. (Moles were planned that
way!) Since one mole of MgCl2 consists of one mole of magnesium and two moles of chlorine, the
mass of one mole of MgCl2 must be the sum of the masses of the elements. The mass of one mole of a
substance is called the molar mass or molecular weight.
Examples: What is the molar mass of the following compounds?
MgCl2 24.31 + 2(35.45) = 95.21 g/mol
Mg(NO3)2 24.31 + 2(14.01) + 6(16.00) = 148.33 g/mol
NaNO3 23.00 + 14.01 + 3(16.00) = 85.01 g/mol
AgCl 107.9 + 35.45 = 143.4 g/mol
(Note: Yes! You DO have to count significant figures when calculating molecular weight/molar
mass. However, the number of significant figures may vary depending on which periodic table you use.)
Chemists are generally interested in number of moles. Unfortunately, it is impossible to measure
moles directly. However, masses are easily measured, and if the chemical formula of the compound is
known, the molar mass can be used to determine the number of moles. The molar mass is defined as:
molar mass = grams/moles = g/mol (1)
Moles may be calculated by using molar mass as a conversion factor in dimensional analysis where
molar mass in grams = 1 (exactly) mole of compound (2)
This method is used in multi-step calculations. For example, if 0.873 g of MgCl2 is weighed out, it
is 9.17 x 10-3
moles.
1 mole
0.873g x 95.21 g = 9.17 x 10-3
mol MgCl2 (3)
However, 0.873 g of AgCl is only 6.09 x 10-3
mol.
1 mole
0.873g x 143.4 g = 6.09 x 10-3
mol AgCl (4)Molar mass may also be used to relate moles to grams. For example, 0.158 mol of MgCl2 is 15.2 g.
0.158 mol x 95.21 g = 15.2 g MgCl2 (5)
1 mol
Percent is used to express parts per one hundred. Usually in chemistry, it refers to
g of species of interest x 100 = % (6)
g of whole thing
Example: For the % Mg in MgCl2: In one mole of MgCl2, there are 24.31 g of Mg (molar mass of Mg,
the part we are interested in) and 95.21 g of MgCl2 (the whole thing), so %Mg in MgCl2 is
(24.31/95.21) x 100 = 25.53% Mg (7)
PROCEDURE
Work individually.
The formula for calcium phosphate is Ca3(PO4)2. Weigh about 2 g of calcium phosphate to the
nearest 0.001 g. In other words, you do not have to have exactly 2.000g, but you must know the
weight you have exactly. Acceptable results include but are not limited to: 1.985g , 2.035g, 2.314g
etc.
Be sure to report all results with the correct number of significant figures and appropriate units!
Which of the following statements best explains how the first generation 20 points
lady beetle from the above model changed in the later generations? *
Lady Booties
蒙赖隊徽
Finn
Gameretlen
Later
Genovation
In the first generation, the beetles with the dark spotted trait had a better chance of
survival. The beetles changed their color to better adapt to their environment, and the
species evolved to have a lighter color.
In the first generation, the beetles with the dark spotted trait had a better chance of
survival. The trait mutated over time, causing the beetles with that trait to be darker,
and the species evolved to have a darker color.
In the first generation, the beetles with the dark spotted trait had a lower chance of
sury The trait mutated over time, causing the beetles with that trait to be lighter,
and the species evolved to have a lighter color.
In the first generation, the beetles with the dark spotted trait had a lower chance of
survival. The beetles changed their color to better adapt to their environment, and the
species evolved to have a lighter color.
Answer:
In the first generation, the beetles changed to have light spots. The beetles with the light spotted trait had a better chance of survival causing the species evolved to have lighter spots.
Answer:
In the first generation, the beetles with the dark spotted trait had a better chance of survival. The trait mutated over time, causing the beetles with that trait to be darker.
Explanation:
In the picture that I had, it shows that some of the beetles in the first generation started to develop spots on their back or wings. It shows that later down the line, their backs start to get even more darker which means that is must be a trait that mutated over time that would allow the beetles with that trait to be significantly darker. They can't just change their traits if they want to so it would have to be something like mutation that caused it.
what are the steps to naming simple ionic compounds
Answer:
To name an ionic compound, you simply need to find the names of the cation and anion present in the compound and make sure to revise the ends of metal names as needed. First, write out the name of the metal, followed by the name of the non-metal with its new ending.
Explanation:
Write the name of the cation, and then write the name of the anion, changing the ending to "-ide" if it's a single element and leaving it as it is if it's a polyatomic ion.
I 3. How many moles of H, gas are made when 3.2 x 1023 molecules of HCl are used? 2A1 + 6HCI ----> 2AlCl3 + 3H2
Answer:
0.265 moles
Explanation:
From the equation given;
Number of moles of HCl is 6 while number of moles of H is 3.
Now, we know from avogadro's number that 1 mole of a gas = 6.022 × 10^(23) molecules.
We want to find the number of moles of Hydrogen gas made when 3.2 x 10^(23) molecules of HCl are used.
Thus, converting this to moles gives;
(3.2 × 10^(23))/(6.022 × 10^(23)) = 0.53 moles
Thus, we can find the number of hydrogen gas by proportion as;
n = 3/6 × 0.53
n = 0.265 moles
How many formula units are present in 25.0 mol of sodium chloride
25 x 6.022 x [tex]10^{23}[/tex]formula units are present in 25.0 mol of sodium chloride.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex]
of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
One mole of NaCl contains 6.022 x [tex]10^{23}[/tex] NaCl formula units.
25.0 mol of sodium chloride contains 25 x 6.022 x [tex]10^{23}[/tex].
Hence, 25 x 6.022 x [tex]10^{23}[/tex]formula units are present in 25.0 mol of sodium chloride.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
The number of formula units are present in 25.0 mol of sodium chloride is 25 x 6.022 x 10 ²³ formula units of sodium chloride.
What is formula Units ?A formula unit in chemistry is the empirical formula of any ionic or covalent network solid compound used as an independent entity for stoichiometric calculations.
It is the lowest whole number ratio of ions represented in an ionic compound.
Hence, The number of formula units are present in 25.0 mol of sodium chloride is 25 x 6.022 x 10 ²³ formula units of sodium chloride.
Learn more about formula Units here:
brainly.com/question/8455949
#SPJ2
What does the large number in front of
the molecule represent?
6. An unknown compound is analyzed and found to consist of 49% carbon, 2.7
% hydrogen, and 48.2 % chlorine. If the molecular mass of the compound is 150,
what is the molecular formula of the compound?
Answer:
Molecular formula = C₆H₄Cl₂
Explanation:
Given data:
Percentage of hydrogen = 2.7%
Percentage of carbon = 49%
Percentage of chlorine = 48.2%
Molar mass of compound = 150 g/mol
Molecular formula = ?
Solution:
Number of gram atoms of H = 2.7 / 1.01 = 2.67
Number of gram atoms of Cl = 48.2 / 16 = 1.36
Number of gram atoms of C = 49 / 12 = 4.08
Atomic ratio:
C : H : Cl
4.08/ 1.36 : 2.67/1.36 : 1.36/1.36
3 : 2 : 1
C : H : Cl = 3 : 2 : 1
Empirical formula is C₃H₂Cl.
Molecular formula:
Molecular formula = n (empirical formula)
n = molar mass of compound / empirical formula mass
Empirical formula mass = 12×3 + 1.01 ×2 + 35.5 = 73.52 g/mol
n = 150 / 73.52
n = 2
Molecular formula = n (empirical formula)
Molecular formula = 2 (C₃H₂Cl)
Molecular formula = C₆H₄Cl₂
Something that is made out of natural resources for human use is called
Answer:
Man-made resources
Explanation:
Humanized resources are items or substances that have value to human lives that do not occur in the natural world. Examples of man-made resources include plastic, paper, soda, sheet metal, rubber and brass. These contrast with natural resources, such as water, crops, sunlight, crude oil, wood and gold.
is aluminum intensive or extensive
Answer:
Intensive
Explanation:
Aluminium is an Intensive Metal
#HopeItHelps
Which compound below has the highest iron content?
Feo
FeCl2
FeSO4
Fe(OH)2
ANSWER:
Fe(OH)2
Explanation:
Fe(OH)2
The highest iron content.
A compound is a substance that consists of the atoms or the ions of the two or more different elements that are joined by a chemical bond and can't be separated by any physical means. Like water is a compound of oxygen and hydrogen.
This the answer is Fe(OH)2.
The highest iron content of the iron is the second iron hydroxide, and it is an inorganic compound that makes salts from a compound of iron sulfate. Has white sold traces of oxygen which gives it a greenish tint. It can be seen in its mineralogical forms as a form of green rusting.Hence the option D is correct.
Learn more about the compound below.
brainly.com/question/22282338.
The diagram illustrates the water cycle.
Parts of the water cycle labeled U through Z. U: Water moving from a lake into the clouds. V: Clouds. W: Water falling from clouds as rain and snow. X: Water moving from ground to the clouds. Y: Water flowing down the mountainside into a lake. Z: Underground water going into lake.
Which process occurs at location W?
precipitation
evaporation
condensation
transpiration
Answer:
The Answer is Precipitation
Explanation:
Look it up on and then also got it right on the Unit Test and the Quiz.
The diagram illustrates the water cycle, the process that occurs at location W is precipitation. The correct option is a.
What is precipitation?Precipitation is any product of the condensation of atmospheric water vapour that falls under gravitational pull from clouds. The main forms of precipitation include drizzle, rain, sleet, snow, ice pellets, graupel and hail.
Precipitation occurs when a portion of the atmosphere becomes saturated with water vapour so that the water condenses and precipitates or falls. Thus, fog and mist are not precipitation but colloids, because the water vapour does not condense sufficiently to precipitate. Two processes, possibly acting together, can lead to air becoming saturated: cooling the air or adding water vapour to the air. Precipitation forms as smaller droplets coalesce via collision with other raindrops or ice crystals within a cloud. Short, intense periods of rain in scattered locations are called showers.
Precipitation is a major component of the water cycle and is responsible for depositing the fresh water on the planet.
Learn more about precipitation, here:
https://brainly.com/question/18109776
#SPJ6
What is the kinetic energy of a 9 kg object moving at a velocity of 5 m/s?
is a cellphone made from renewable resources *
Answer:
Mobiles are made from many non-renewable materials which have been extracted from the earth – such as: Metals. Plastics.
Explanation:
Answer: they are made from many metals,plastics. etc...
Explanation:
they also aren't bio-degradeable so they're also harmful for the environment.
Please help!!! How many moles are in 4.87x1024 atoms of Mg
4 Na + O2 → 2 Na2O
6.79 moles of O2 will react to form how many moles of Na2O?
Answer:
13.94moles of Na₂O
Explanation:
The balanced reaction expression is given as:
4Na + O₂ → 2Na₂O
Given parameters:
Number of moles of O₂ = 6.97moles
Unknown:
Number of moles of Na₂O
Solution:
To solve this problem;
1 mole of O₂ will produce 2 moles of Na₂O ;
6.97 moles of O₂ will produce 6.97 x 2 = 13.94moles of Na₂O
how many
moles are in 9.01 x 1023 molecules of water. answer should be rounded to three significant figures.
A. 1.50
B. 15.0
C. 0.150
D. None of the above
Answer:
A. 1.50
Explanation:
9.01 x 1023 molecules* 1 mol/ 6.022×1023 molecules= 1.49618067087 moles
Rounded would be 1.50
Dylan is completing an experiment in science class. The teacher gave Dylan a raw egg that had the shell removed. The egg is surounded by a membrane. Dylan gently placed the egg into a solution. Below is a diagram of the concentration of water molecules in the egg and in the solution.
Based on the diagram, what will happen to the egg?
A.
It will shrink because water molecules will move out of the egg until all the water molecules are in the solution.
B.
It will swell because water molecules will move into the egg until the concentrations are equal.
C.
It will swell because water molecules will move into the egg until all the water molecules are inside the egg.
D.
It will shrink because water molecules will move out of the egg until the concentrations are equal. HELPPPPPPPPPPPPPPPPPP PLS
Answer: AA
Explanation:
PLEASE ANSWER BY 9:00pm PT
“A person takes in a breath of 450.0 mL air at 756 mmHg and -10.0°C. Assuming that amount and pressure remains constant, what is the volume of air when it warm to body temp (37.0°C)? (Convert °C to Kelvins (+273))”
- my chem teachers question
The given answer is 58.9 mL
I didn’t know how to get to that conclusion
And I have to show my work
Answer:
thanks to all the mortal those who are born must die one day that it cut in cannot be avoided as ripe fruit fall of the tree so it is common to all the mortal those who are born must die one day that it cut
Explanation:
silghjnb bj i bb b nv bv hc U and lamenting produce a few of the tree so much for your time is common to both of us ☺️ to all the said that death of the tree so it cut in cannot be avoided as well as well but the mortal Kombat X the said
The reaction between gallium bromide and sodium sulfite will yield ___ ?
Answer:
An equation for a chemical reaction in which the number of atoms for each element in the ... sulfide: 8 Fe + S8 ---> 8 FeS o _____ DECOMPOSITION _____: Definition - A single ... Hydrogen peroxide will produce water and oxygen gas if left in sunlight. (a) ... Sodium oxide reacts with carbon dioxide to form sodium carbonate.
sorry if wrong:(
Explanation:
