Answer:
A simple siphon raises water over a crest and discharges it at a lower level.It works coninueasly due to pull of gravity.
Explanation:
Siphons are tubes which draw fluid over the rim of a tank to a lower point. After an initial pressure change to initiate the flow, siphons operate continuously due to the pull of gravity.
Working:
A simple siphon raises water over a crest and discharges it at a lower level. As water flows through a siphon, energy due to pressure and elevation is either lost to pipe friction or converted to velocity energy.
A 50 kg swimmer goes off end of water slide at 10 m/s- what is swimmers momentum ?
Answer:
The swimmer's momentum is 500 Kg m/s.
Hope you could get an idea from here.
Doubt clarification - use comment section.
HELP!!!
Which of the following statements is true about magnets?
A. The molecules of the atom are unaligned
B. The orientation of atoms does not affect a magnet
C. The north pole is stronger than the south pole
D. The molecules of the atom are all aligned
Giving brainliest to the correct answer! (If both are correct I'll give whoever answered correctly 1st brainliest!)
Answer:
Explanation:
A is not correct. That means that D is since they offer exactly the opposite meanings.
C is rubbish. One pole could not be stronger than the other. Heaven help us if touched the stronger pole.
B the very point of a magnet is that it does matter how the atoms are orientated.
a race car is traveling at a speed of 80.0m/s on a circular race track of radius 450m what is the centripetal acceleration
Answer:
The answer of this question is =1.258*10-4
An engine has an energy input of 125 J, and 35 J of that energy is transformed into useful energy. What is the efficiency of the engine? 28% 35% 72% 90%.
The efficiency of the engine at the given useful energy and input energy is 28%.
The given parameters:
Input energy of the engine, = 125 JUseful energy of the engine, 35 JThe efficiency of the engine is defined as the ratio of the output energy (useful energy) to the input energy and it is calculated as follows;
[tex]efficiency\ = \frac{0ut put \ energy}{1nput \ energy} \times \ 100\%\\\\efficiency\ = \frac{35}{125} \times 100\%\\\\efficiency\ = 28 \ \%[/tex]
Thus, the efficiency of the engine at the given useful energy and input energy is 28%.
Learn more about efficiency of engine here: https://brainly.com/question/6751595
Answer:
ITS A
Explanation:
what does it mean to be skeptical of health fraud
Something that is falsely advertised to help different health issues. An example could be Eyeball massagers
A multi-dimensional being reaches down to Earth and pulls you out of the universe. You are then thrown back into the universe at a place and time of the being's choosing, and you are permitted to leave only after you have identified your surroundings. This process is repeated several times. Through a scientifically unexplainable miracle, you are able to survive in every one of the places that you find yourself. In each scenario below, identify your surroundings (and potentially your cosmic era) from among the choices given. You find yourself in a place that is unimaginably hot and dense. A rapidly changing gravitational field randomly warps space and time. Gripped by these huge fluctuations, you notice that there is but a single, unified force governing the universe.
Required:
Where are you?
You are in an early universe.
In the study of the evolution of the universe, it has been determined before Plank time (before the big bang and right after it), the early universe had the following characteristics:
There was only one single force acting over all that existed.The early universe was very hot and dense because all matter had contracted before the big bang.Space and time were wrapped.These characteristics match the ones described, based on this, we can conclude you are in an early universe.
Learn more about universe in: https://brainly.com/question/9724831
where in space did the expansion of the universe begin?
Answer:
The big bang
Explanation:
It is theorized the expansion of the universe began with the big bang, the universes expansion therefore did not begin in a spot of the universe rather the universe expanded from the big bang.
The relationship between Acceleration and Mass is described as:
O a. Equal
O b. Directly Proportional
O c. Inversely Proportional
O d. Opposite
O e. None of these
Explanation:
According to Newton's second law
[tex]\\ \sf{:}\dashrightarrow Force=Mass\times Acceleration [/tex]
[tex]\\ \sf{:}\dashrightarrow Mass=\dfrac{Force}{Acceleration}[/tex]
[tex]\\ \sf{:}\dashrightarrow Mass\propto \dfrac{1}{Acceleration}[/tex]
Option C
Draw a diagram that represents how a mechanical wave interacts with a particular material.
Create a diagram and include reflection, absorption, and transmission.
Write a brief description (3+ sentences) of the interaction of the mechanical waves and the material. Include an explanation of how the amplitude and frequency of the wave are affected.
85 POINTS!!
When mechanical waves interact with material, it transfer its energy to the material.
What are mechanical waves?Mechanical waves are the type of waves that require a medium for transporting their energy from one region to another. Mechanical waves depend on particle interaction in order to transport their energy.
The amplitude and frequency of the wave are negatively affected due to the striking of mechanical waves with the material.
Learn more about waves here: https://brainly.com/question/75996
Answer:
i have a screenshot just use mine https:/ss27
Explanation:
What is an object's mass if it accelerates at 5 m/s2 when a force of 0.5 N is applied?
Answer:
0.1kg
Explanation:
mass = force / acceleration
0.5 / 5
0.1kg
The apparent brightness of stars in general tells us nothing about their distances; we cannot assume that the dimmer stars are farther away. In order for the apparent brightness of a star to be a good indicator of its distance, all the stars would have to be:__________.
a. at the same distance
b. the same composition
c. the same luminosity
d. by themselves instead of in binary or double-star systems
e. a lot farther away than they presently are
How do you find the input distance
Answer:
The work efficiency formula is efficiency = output / input, and you can multiply the result by 100 to get work efficiency as a percentage. This is used across different methods of measuring energy and work, whether it's energy production or machine efficiency.
Explanation:
(a) One medium is air, in which the speed of light is 3.00 x 108 m/s. The other
medium is ice, in which light has a speed of 2.29 x 108 m/s. Use this information to
identify medium A and medium B. Explain
Answer:
WARNING WRONG SPELLING.that is a ternadow and very dangeruse air .How does production and possibilities curve show efficiency grouth and opportunity cost
Answer:
The Production Possibilities Curve (PPC) is a model that captures scarcity and the opportunity costs of choices when faced with the possibility of producing two goods or services. Points on the interior of the PPC are inefficient, points on the PPC are efficient, and points beyond the PPC are unattainable.
Explanation:
True or false organisms only compete with their own species?
Answer: yes
Explanation:
Animals of different species typically compete with each other only for food, water and shelter. But they often compete with members of their own species for mates and territory as well.
what is the purpose of the thermal energy tranfer lab
Answer:thermal Energy Transfer in Mixtures Purpose: The purpose of this experiment is to discover how exactly the final temperature of a mixture, involving a substance and hot water, is affected and impacted by the type of substance used. This means that when hot water is mixed with another substance, it must be determined
Explanation:
did this on edge
A digital stopwatch reading 0:13 37. Read the elapsed time on the stopwatch and answer the questions. In which digit is there the least amount of confidence? How many significant figures does this measurement have?.
The digit with the least amount of confidence can be seen in the second part which is 7.
The number of significant figures in the measurement of the stopwatch is 4.
An elapsed time is the difference between the time prior to the commencement of an event and the time at which the event has ended.
From the stopwatch, the elapsed time is given as:
0hour : 13 minutes : 37 seconds
The digit with the least amount of confidence can be seen in the seconds part is 7.
A significant figure is a real figure that is dependable and absolutely essential to convey the quantity of something.
The number of significant figures in the measurement of the stopwatch is 4.
Learn more about elapsed time here:
https://brainly.com/question/10403745
Answer: 7 and 4
Explanation: A digital stopwatch reading 0:13 37.
Read the elapsed time on the stopwatch and answer the questions.
In which digit is there the least amount of confidence?
7
How many significant figures does this measurement have?
4
what was stored when you bent the ruler in your left hand?
Answer:
potential energy
the name comes from the fact that the ruler has "potential" to act
Explanation:
Explanation:
The deformation of the ruler creates a force in the opposite direction, known as a restoring force.
I'm not sure if it's correct...
what is the danger to spacecraft and astronauts from micrometeoroids?
Answer:
Suppose the micrometeoroid weighed 1 g = .001 kg
Suppose also the spacecraft were moving at 18,000 mph (1.5 hrs per rev)
Usually, the smaller particle would be moving but for simplicity suppose that it were stationary wrt the ground
v = 18000 miles / hr * 1500 m/mile / 3600 sec/hr = 7500 m/s
KE = 1/2 * .001 kg * (7500 m)^2 = 28,125 Joules
One can see that 28000 Joules could be damaging amount of energy
(50 POINTS) please answer each question:
what is the Distance from Earth (light years)
what is the Visual Luminosity in comparison to Sun
what is the Surface Temperature (Kelvin)
stars:
Sun
Alpha Centauri A
Sirius B
Barnard’s Star
Vega
Proxima Centauri
Answer:
i know the first one.
Explanation:
the distance from earth in light years is 6 trillion miles.
Does the coefficient of kinetic friction depend on the speed?
Answer:
yes because if the speed/K.E. of body increases the friction will also apply more instantly
On a frictionless surface how much force is necessary to accelerate a 0.49 kg object to the left at 4.8 m/s2?
Answer:
2.35 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question
force = 0.49 × 4.8 = 2.352
We have the final answer as
2.35 NHope this helps you
I'll give brainlest
*the first pic is for Alberto and second for the mouse*
Question 1
Alberto created a graph to illustrate his trip. Answer the questions below.
A. How does Alberto's motion change at point B?
B. What is Alberto's speed from point C to point D?
C. What happens at point D? (1 point)
Question 2
Answer the question below about Smokey The Mouse.
A. Use inertia to explain how a balanced force will affect his motion. (Newton's 1st Law)
B. What are two ways Smoky can increase his speed? (Use Newton's 2nd Law to help you)
C. What is an example of an action and reaction at work in this picture? (Use Newton's 3rd Law to help you)
Answer:
The mouse exerts a force on the ground and the ground exerts an equal and opposite reaction force on the mouse.
At point B, Alberto's distance covered increases with time, equal distance is covered in equal time interval. The speed increases uniformly. At the point C to D, the distance covered with time remains the same. At the point D, equal distance is no longer covered in equal time intervals.
According to the law of inertia, an object will remain at rest or in a state of uniform motion unless it is acted upon by an unbalanced force. This means that smokey mouse will continue moving uniformly unless a force acts on it.
From Newton's second law; F = ma and a = F/m. F = force , m= mass, a = acceleration. This implies that smokey mouse can increase its speed by;
Increasing the force acting on the mouse
Decreasing the mass of the mouse
Action and reaction is encountered as the mouse is walking. The mouse exerts a force on the ground and the ground exerts an equal and opposite reaction force on the mouse.
Explanation:
do muscle and bone weigh more than fat
Answer: . You may have heard that muscle weighs more than fat. However, according to science, a pound of muscle and a pound of fat weigh the same. The difference between the two is density.
Explanation:
An astronomical unit (A.U.) is 1 point A) a term for defining the luminosity of a star B) the average distance from the Earth to the sun C) the average distance of any given planet to the sun D) equal to a light year
Answer:
B) the average distance from the Earth to the Sun
Explanation:
rube goldberg machine steps
Answer:
Rube Goldberg Machine is "a comically involved, complicated invention, laboriously contrived to preform a simple operation." 2. What are the 6 Simple Machines? A. The 6 Simple Machines are: wedge, screw, lever, wheel and axel, inclined plane and pulley.
Jeff Gordon leads his race and must drive into a curve at top speed to win it all. The radius of the curve is 1000 m and the coefficient of static friction between his tires and the dry pavement is 0.50.
Answer:
Apparently the curve is not banked.
The maximum frictional force is -
Ff = m g * .5
Fc = m v^2 / R where Fc is the centripetal force that must be present in
order for the car not to slip.
.5 g = v^2 / R equating forces
v^2 = .5 R g = .5 ^ 1000 * 9.80
v = (500 * 9.80)^1/2 = 70 m/s
(about 230 ft/sec = 230/88 * 60 = 157 mph
A projectile is fired with a velocity of 320 ms at an angle of 30 degree to a horizontal.1 Find the time to reach the maximum height. 2 it's horizontal range.
(a) The time taken for the projectile to reach the maximum height is 32.65 s.
(b) The horizontal range of the projectile is 9,049.1 m.
The given parameters:
Initial velocity of the projectile, u = 320 m/sAngle of projection, = 30 degreesThe time taken for the projectile to reach the maximum height is calculated as follows;
[tex]v_f = u- gt\\\\0 = 320 - 9.8t\\\\9.8t = 320\\\\t = \frac{320}{9.8} \\\\t = 32.65 \ s[/tex]
The horizontal range of the projectile is calculated as follows;
[tex]R = \frac{u^2 sin(2\theta)}{g} \\\\R = \frac{320^2 \times sin(2\times 30)}{9.8} \\\\R = 9,049.1 \ m[/tex]
Learn more about horizontal range here: https://brainly.com/question/12870645
What does electrical energy transform into when used by objects in a home?
Answer:
What can electrical energy be transformed into?
Electrical energy is transformed into many forms - mechanical/kinetic, sound, heat, light, and other forms of electromagnetic radiation - by everyday appliances.
Explanation:
Answer:
none of the other answers could be correct.
Explanation:
The sun nuclear energy transfers to radiant energy A fire Chemical energy transfers to thermal and radiant energy. wind turbine Kinetic motion energy transfers to electrical energy. Lightbulb Electrical energy transfers to radiant and thermal energy. Radio Electrical energy transfers to sound energy.
An object is struck by a 5N force for 8 seconds causing the object to experience a change in it's motion. What is the impulse acting on the object?
Hi there!
Recall the equation for impulse:
[tex]I = \Delta p = F * t[/tex]
Where:
I = Impulse (Ns)
F = Force (N)
t = Time (s)
Plug in the given values:
I = 5 · 8 = 40 Ns
