How does the appearance of a substance change when it
changes phase?

Answer:

where is diagram. sorry.

Answer:

Explanation:

1 mol of sodium = 23 grams (use the number on your periodic table).

0.7350 mol sodium = x

Cross multiply

1*x = 0.7350 * 23

x = 16.905

You will get slightly less than this, depending on your periodic table. But the method will be the same.

Answer:

ostrich??????????????????

Ionic compounds have a high boiling point and be a solid at STP.

Ionic compounds are those compounds which are formed due to high electrostatic attraction between cations and anions.

Ionic compounds are generally present in the solid state because of the presence of strong ionic bond. And due to this rigid structure boiling point of ionic compounds are very high as they want more energy to break their bonds.

Therefor, at standard temperature pressure (STP) ionic compounds will likely have a high boiling point and be a solid at STP.

To learn more about ionic compounds, visit below link:

https://brainly.com/question/11638999

Answer:

All of above.

Explanation:

Stars. They come in different sizes, temperatures, and colors. Not all are yellow, and not all are small or big. Some can be hot, and others can be cold. Stars can exist for a while, years on end. It just varies on how long it's been there.

I hope this helps you!

Answer:

Molar mass of Ca = 40 g / mol , given 123 g Ca is 123/40= 3.075 moles,

1 mole = 6.022 * 10^23 atoms, so 3.075 moles Ca= 18.51*10^23 atoms

Explanation:

The number of atoms present in 123 g of calcium is 18.51 x 10²³ atoms.

Calcium is an element present in the periodic table. It is very much needed for the strength of the bones and teeth.

"Molar mass of many compounds can be calculated by dividing the mass of the compound by the number of moles of the compound."

"The mole is a SI unit of measurement that is used to calculate the quantity of any substance".

First, calculate the moles

Moles = mass / molar mass

Molar mass of Ca = 40 g / mol

Given 123 g Ca is mass

123 / 40 = 3.075 moles,

1 mole = 6.022 x 10²³  atoms,

6.022 x 10²³ is the Avogadro number. It equals to one mole.

So 3.075 moles Ca= 18.51 x 10²³ atoms.

Thus, the number of atoms present in 123 g of calcium is 18.51 x 10²³ atoms.

To learn more about atoms, refer to the below link:

https://brainly.com/question/11763544

#SPJ2

Answer: Ca(NO3)2(aq) + 2NaOH(aq) —> Ca(OH)2(s) + 2NaNO3(aq)

Substitution

Explanation:

The given reaction is a substitution reaction in which hydroxil group is exchanged between compounds.

Substitution Reaction:

It is a reaction in which functional group of a compound replaced by the another functional group.

For example-

[tex]\bold {Ca(NO3)_2(aq) + 2NaOH(aq) \rightarrow Ca(OH)_2(s) + 2NaNO_3(aq)}[/tex]

In the reaction hydroxil group is exchanged between compounds.

1 mole of aqueous calcium nitrate react with  2 moles aqueous sodium hydroxide to produce  1 mole of solid precipitate calcium hydroxide and 2 moles aqueous sodium nitrate.

Therefore, the given reaction is a substitution reaction in which hydroxil group is exchanged between compounds.

To know more about Substitution Reaction,

https://brainly.com/question/16811879

Answer:

13. 2g

14. 5000mL

15. 104,000m

16. 160mm

17. 5600000mg

18. 10hs

19. 0.250km

20. 1daL

Explanation:

13. 1000milligram (mg) = 1gram (g)

Hence, 2000mg = 2000/1000

= 2g

14. 1 litre (L) = 1000millilitre (mL)

Hence, 5L = 5 × 1000

= 5000mL.

15. 1kilometre (km) = 1000metre (m)

Hence, 104km = 104 × 1000

= 104,000m

16. 1 centimetre (cm) = 10millimeters (mm)

Hence, 16cm = 16 × 10

= 160mm

17. 1kilogram (kg) = 1000000 milligram (mg)

Hence, 5.6kg = 5.6 × 1000000

= 5600000mg

18. 1 second (s) = 0.01 hectosecond (hs)

Hence, 1000s = 1000 × 0.01

= 10hs

19. 1000metre (m) = 1kilometre (km)

Hence, 250m = 250/1000

= 0.250km

20. 1 centiliter (cl) = 0.001 Decaliter (daL)

Hence, 1000cl = 1000 × 0.001

= 1daL

Answer:

The answer to your question is D. 25 grams.

Answer

22 grams hope this helps

Answer:

CH

Explanation:

CH, a typical sample of the compound contains one atom of carbon (C) to one atom of hydrogen (H).

Answer:

That means we do not need to use chemical reactions to separate them. ... The one liquid component in milk is water, and the other is fatty oil. ... Identify the type of substances (solid, liquid or gas) that are mixed in each

Explanation:

Answer:

[tex] \huge \sf \colorbox{pink}{hey \: there}[/tex]

Explanation:

The mixture of clay or sand with water is muddy. The small clay particles become suspended in the water. This kind of mixture is called a suspension. Suspensions are opaque; that means they are cloudy and we cannot see through them very well.

Answer:

False.

Explanation:

(5 kilometers / 30 minutes), you could then say that in 60 minutes (one hour) you would be traveling at (10 kilometers / 60 minutes)...

Therefore, it is unlikely that you would be traveling at (6 kilometers / hour), so the answer should be... False.

 Answer:

I live in the USA so the questions have been answered to reflect that accordingly.

1. The letter which represents summer where I live is Letter C

Explanation:

Letter C represents the June solstice which usually takes place between June 20 and June 21.

2. The letter which represents winter where I live is letter A.

Explanation:

Letter A represents the December solstice. Another name for this is Winter Solstice. This usually takes place in December for those living in the Northern Hemisphere like me. It is projected that this will take place on Tuesday, 21 December 2021.

Another name for this is Northern Hemisphere Winter Solstice as it marks the first day of winter.

3. The correct seasons for June Solstice are:

Northern Hemisphere: Summer Solstice

This projected to occur on Sunday, 20 of June 2020. It will be characterized by 1 hour of twilight and approximately 10 hours each of daylight and night time.

4. Southern Hemisphere: Summer solstice

This is anticipated on Tuesday, 21 December 2021. It will also be characterized by 1 hour of twilight and approximately 10 hours each of daylight and night time.

5. Northern Hemisphere: Autumnal (Fall) Equinox  

6. Southern Hemisphere:  Spring (Vernal) equinox  

7. December Solstice - Northern Hemisphere: Winter Solstice is the Day of the Year with the shortest amount of sunlight

8. December Solstice - Southern Hemisphere: Summer Solstice. This is the day of the year with the longest amount of sunlight

9. March Equinox - Northern Hemisphere: Spring (Vernal) Equinox. This is the start of spring.

10. March Equinox - Southern Hemisphere: Autumnal (Fall) Equinox. This is the start of Fall.

Cheers!

Answer: The nuetron was

Explanation: sorry is this is incorrect but im

99% its right

Answer:

90 mV

Explanation:

Faraday constant, F = 96487

Gas constant, R = 8.314

Number of mole of electron transferred, Z = 2

MgCl in solution A, = 0.1 mm

MgCl in solution A, = 100 mm

Using the relation :

E=(RT/ZF) In(Mg out/Mgin)

E = (8.314*298) / (2*96485) * In(100/0.1)

E = (2477.572 / 192970) * 6.9077552

E = 0.0128391 * 6.9077552

E = 0.0886897 V

E = 88.68 mV (approximately 90 mV)

Answer:

Liquid oxygen evaporates at only a slightly higher temperature than liquid nitrogen because they have similarly low attraction between molecules. This would mean less liquid oxygen is coming out of tank 3 because some of it is evaporating as a gas instead.

The liquid oxygen machine is producing less liquid oxygen than normal because there's a low attraction between the molecules.

It should be noted that oxygen in its liquid state will take up less space. It can also be stored at a lower pressure than when it's in its gaseous state.

From the complete question, the liquid oxygen evaporates at a slightly higher temperature than the liquid nitrogen. The reason for this is due to the fact that they have similarly low attraction between molecules.

Read related link on:

https://brainly.com/question/16173485

Answer:

The ability to do work is energy.

Hope it helps!!!

Answer: See explanation

Explanation:

Here's the correct question:

The total ages of 5 children born at the intervals of 3 years each is 50 years. Find the age of the youngest and the oldest child.

From the information given, we can then make the following assumption with regards to their ages.

First child = y

Second child = y + 3.

Third child = y + 6

Fourth child = y + 9

Fifth child = y + 12

Therefore, y + y+3 + y+6 + y+9 + y+12 = 50

5y + 30 = 50

5y = 50 - 30

5y = 20

y = 20/5

y = 4

Youngest child = 4 years

Oldest child = y + 12 = 4 + 12 = 16 years

Answer:

3rd

Explanation:

Answer:

Explanation:

From the information given:

(a)

[tex]Concentration \ in \ mg/L = \dfrac{Mass \ of \ MTBE \ in \ mg}{Total \ volume (in \ L)}[/tex]

[tex]Concentration \ in \ mg/L = \dfrac{222 \times 10^3 \ mg}{22}[/tex]

[tex]Concentration \ in \ mg/L = 111 \times 10^3 \ mg/L[/tex]

(b)

[tex]number \ of \ mole s= \dfrac{mass}{molar \ mass } \\ \\ number \ of \ mole s=\dfrac{222 \ g}{88.15 \ g/mol} \\ \\ \mathbf{= 2.518 mol}[/tex]

(c)

[tex]w/w \ percentage = \dfrac{mass \ of \ MTBE }{mass \ of \ solution (RFG)}\times 100\%[/tex]

[tex]where; \\ \\ mass \ of \ (RFG) = 2L \times 0.70 g/mL \\ \\ mass \ of \ (RFG) = 2000 ml \times 0.70 g/mL \\ \\ mass \ of \ (RFG) = 1400 g[/tex]

∴

[tex]w/w \ percentage = \dfrac{222 \ g}{1400 \ g}\times 100\% = \mathbf{15.8\%}[/tex]

(d)

[tex]Volume of MTBE =\dfrac{mass \ of \ MTBE}{density \ of \ MTBE}[/tex]

[tex]Volume \ of \ MTBE = 300 \ mL\\[/tex]

∴

[tex]v/v\% = \dfrac{volume \ of \ MTBE}{volume \ of \ RFG} \\ \\ v/v\% =\dfrac{300 \ mL}{2000 \ mL}\times 100\% \\ \\ \mathbf{v/v\% = 15.00\%}[/tex]

(e)

[tex]From \the \ given \ information; \\ \\ 2.5184 \ moles\ of \ MTBE contain \ 2.5184 \ mole of oxygen[/tex]

∴

[tex]mass of oxygen MTBE = 2.5284 mol \times 16\ g/mol \\ \\ mass of oxygen MTBE = 40.3 9 \ g\\ \\ mass\ of \ RFG = 1400 g[/tex]

∴

[tex]\% w/w = \dfrac{mass \ of \ oxygen}{mass \ of RFG }=\dfrac{40.22 \ g}{1400 \ g} \times 100\%[/tex]

[tex]\% w/w == 2.88\%[/tex]

Assume That The Density Of RFG Is 0.7 G/mL And The Density Of MTBE Is ... are added to gasoline, resulting in a total volume of 2 L of reformulated gas (RFG). ... Assume that the density of RFG is 0.7 g/mL and the density of MTBE is 0.74 g/mL. Determine the concentration of MTBE in the RFG in the following units (a-d)

Answer:

Option C

Explanation:

The answer is option C or "The amount of time it takes to rotate around it's axis is the same amount of time it takes to revolve around Earth."Remember that the Earth and the Moons amount of time to make a full rotation is almost in sync and they're two sides of the moon, one side we do not see and that's because that side is currently faced away from the Earth which is called the dark side of the moon. Each side has two weeks oh night, and two weeks of day because of how long it takes the moon to revolve, so while we have a side towards the Earth which is illuminated by the sun we have another pointing away in the dark.

Hope this helps.

Answer:

C4H10 has a higher boiling point due to stronger dispersion forces

1-butanol has the greater boiling point mainly due to hydrogen bonding influences

Explanation:

If we consider propane and n-butane, we discover that they are both alkanes. However, the magnitude of dispersion forces in alkanes depends on the length of the carbon chain. The greater the length of the carbon chain is greater in n-butane than in propane. The greater the chain length, the greater the magnitude of dispersion forces and the greater the boiling point. Hence, n-butane has a higher boiling point than than propane.

Also, if we compare the boiling points of 1-butanol to that of diethyl ether, we will discover that 1-butanol has a higher boiling point mainly due to intermolecular hydrogen bonding influences.

Answer:

1 ans is atmosphere

2 ans is Acid rain is a rain or any other form of precipitation that is unusually acidic, meaning that it has elevated levels of hydrogen ions. It can have harmful effects on plants, aquatic animals, and infrastructure.

Answer:

Oxygen and glucose

Explanation:

Plants use the sun, water, and CO2 to make their own energy. Glucose is the result, and Oxygen is just a biproduct.

Answer:

To answer this question we would need the Molecular empirical formula that relates the reactant of N2 to the final product of CH3NH2. Then it would be easily solved by using stoichiometric ratios. Basically it is done similar to unit conversion problems.

Answer:

Hope this helps! （；＿；)/

Explanation: