Four balls with different masses are dropped from the heights shown. Air resistance may be ignored. Which ball has the greatest average speed?

Answer:

"the minimum frequency of radiation that will produce a photoelectric effect."

Explanation:

That answer was derived from gogle cuz my explanations was harder to explain but good luck

Answer:

x = 0.9 m

Explanation:

For this exercise we must use the rotational equilibrium relation, we will assume that the counterclockwise rotations are positive

          ∑ τ = 0

          60 1.5 - 78 1.5 + 30 x = 0

where x is measured from the left side of the fulcrum

           90 - 117 + 30 x = 0

           x = 27/30

           x = 0.9 m       

In summary the center of mass is on the side of the lightest weight x = 0.9 m

Answer:

The answer is "80 cm".

Explanation:

The distance of 21 cm between the speaker's effect of high strength but a spacing of 61 cm corresponds to a zero to zero intensity, that also is, the waves are all in phase with others [tex]\Delta \ x_1 = 21 \ cm[/tex] this is out of phase [tex]\Delta\ x_2 = 61\ cm[/tex]

[tex]\therefore\\\\\Delta\ x_2 -\Delta\ x_1 = \frac{\lambda}{2}\\\\\lambda= 2( \Delta\ x_2 -\Delta\ x_1)[/tex]

   [tex]= 2 ( 61\ cm - 21\ cm)\\\\ = 2(40\ cm)\\\\= 80\ cm[/tex]

Answer:

store a charge for later use

Answer:

The dimensional formula of Young's modulus is [ML^-1T^-2]

Answer:

G.oogle : The dimensional formula for Young’s modulus is:

A. [ML−1T−2]A. [ML−1T−2]

B. [M0LT−2]B. [M0LT−2]

C. [MLT−2]C. [MLT−2]

D. [ML2T−2]

Answer:

Explanation:

A bullet being shot out of a gun tends to leave tiny amounts of the bullet behind due to friction between the bullet and the gun barrel.

A roller skater pushing requires the conversion of food chemical energy to muscle contraction energy. This conversion increases the body temperature and sweat is excreted to counteract the heat increase. The evaporation of the sweat causes a slight decrease in body mass.

A jet plane taking off consumes some of the fuel carried onboard to provide thrust. The products of combustion become part of the exhaust stream leaving the airplane rearward providing forward thrust.

Answer: 26.84 m/s

Explanation:

Given

Original frequency of the horn [tex]f_o=228\ Hz[/tex]

Apparent frequency [tex]f'=246\ Hz[/tex]

Speed of sound is [tex]V=340\ m/s[/tex]

Doppler frequency is

[tex]\Rightarrow f'=f_o\left(\dfrac{v+v_o}{v-v_s}\right)[/tex]

Where,

[tex]v_o=\text{Velocity of the observer}\\v_s=\text{Velocity of the source}[/tex]

Insert values

[tex]\Rightarrow 246=228\left[\dfrac{340+v_o}{340-0}\right]\\\\\Rightarrow 366.84=340+v_o\\\Rightarrow v_o=26.8\ m/s[/tex]

Thus, the speed of the car is [tex]26.84\ m/s[/tex]

Answer:

A cloud can discharge as much as 20 coulombs in a lightning bolt.

Answer:

a politician is a person active in party politic or person holding os seeking an elected seat in government.politicans purpose, support,and create laws that govern the land and by extension ,it's people.

Answer:

W = 641.52 J

Explanation:

The work done here will be the sum of potential energy and the kinetic energy of the boy. Here potential energy accounts for vertical motion part while the kinetic energy accounts for the horizontal motion part:

[tex]Work\ Done = Kinetic\ Energy + Potential\ Energy\\\\W = K.E +P.E\\\\W = \frac{1}{2}mv^2+mgh\\\\[/tex]

where,

W = Work Done = ?

m = mass = 6 kg

v = speed = 4.2 m/s

g = acceleration dueto gravity = 9.81 m/s²

h = height = 10 m

Therefore,

[tex]W = \frac{1}{2}(6\ kg)(4.2\ m/s)^2+(6\ kg)(9.81\ m/s^2)(10\ m)[/tex]

W = 52.92 J + 588.6 J

W = 641.52 J

Explanation:

the process of conversion of energy from one form to another is called transformation of energy.

Answer:

The net electric field at the midpoint is 6.85 x 10^7 N/C.

Explanation:

q = − 8.3 μC

q' = + 7.8 μC

d =  9.2 cm

d/2 = 4.6 cm

The electric field due to the charge q at midpoint is

[tex]E = \frac{k q}{r^2}\\\\E = \frac{9\times 10^9\times 8.3\times 10^{-6}}{0.046^2}\\\\E = 3.53\times 10^7 N/C[/tex] leftwards

The electric field due to the charge q' at midpoint is

[tex]E' = \frac{k q}{r^2}\\\\E' = \frac{9\times 10^9\times 7.8\times 10^{-6}}{0.046^2}\\\\E' = 3.32\times 10^7 N/C[/tex]

The resultant electric field at mid point is

E'' = E + E' = (3.53 + 3.32) x 10^7 = 6.85 x 10^7 N/C

Answer:

a) 0.46875

b) 8 km

Explanation:

Smokestack height ( H ) = 50 m

speed of pollutant / wind speed = 3 m/s

Half width = 2 [tex]\sqrt{2Dt }[/tex] = 50 m  ---- ( 1 )

a) If L = 2 km

value of turbulent diffusion coefficient D

back to equation 1

50 = 2 √ 2 * D * ( 2000/3 )

2500 = 4 * 2 * D * ( 2000/3 )

D = 2500 / ( 8 * ( 2000/3 )  )

   = 0.46875

where : time to travel ( t ) = Distance / speed = 2000 / 3

b) when the smoke stack = 50 * 2 = 100 m

L = 800 m = 8 km

attached below is the detailed solution

Answer:

The answer is "[tex]0.3336\ m^3[/tex]"

Explanation:

Using the Promideal gas law:

[tex]P_A=P_B\\\\P_A(V_A-\eta_A b)= \eta_A RT......(1)\\\\P_B V_B=\eta_B \bar{R}T........(2)\\\\From (1) \zeta (2)\\\\[/tex]  

[tex]\frac{\eta_A}{V_A-\eta_A b}=\frac{\eta B}{V B}\\\\ \frac{V A- \eta_A b}{V B}=\frac{\eta A}{\eta B }\\\\ \frac{V A-b}{V B}=\frac{1}{2}\\\\V A+V B=1\\\\V B =1- V A\\\\\frac{V A-b}{1-V A}=\frac{1}{2}\\\\2V A-2b=1-V A\\\\3 V A=1+2b\\\\V A=\frac{1+2b}{3}\\\\[/tex]

      [tex]=\frac{1+2(4\times 10^{-4})}{3}\\\\=0.3336\ m^3[/tex]

The equilibrium value of Va is 0.3336 m³.

The equilibrium value of Va is determine by applying ideal gas law as shown below;

Pressure of gas A = Pressure of gas B

Pa = Pb

Pa(Va - nab) = naRT----(1)

PbVb = nbRT -----(2)

Solve equation (1) and (2)

[tex]\frac{P_b}{RT} = \frac{n_b}{V_b} \\\\\frac{P_b}{P_a(V_a- n_ab)/n_a} = \frac{n_b}{V_b}\\\\\frac{n_a}{V_a - n_ab} = \frac{n_b}{V_b} \\\\\frac{V_a - n_ab}{V_b} = \frac{n_a}{n_b} \\\\\frac{V_a - b}{V_b} = \frac{1}{2}[/tex]

Va + Vb = 1

Vb = 1 - Va

[tex]\frac{V_a - b}{1 - V_a} = \frac{1}{2}[/tex]

2Va - 2b = 1 - Va

3Va = 1 + 2b

[tex]V_ a = \frac{1 + 2b}{3} \\\\V_a = \frac{1 + (2 \times 4\times 10^{-4})}{3} \\\\V_a = 0.3336 \ m^3[/tex]

Thus, the equilibrium value of Va is 0.3336 m³.

Learn more about equilibrium value here: https://brainly.com/question/22569960

Answer

Explanation

:giác mạc

Answer:

nnnjjdndbsnnshfhhgbfbdbdh

Your friend would have a better experience of this event, than you .

An eclipse is produced when a planetary body moves in front of another planetary body and is visible from a third planetary body. Considering the sun, moon, and earth's locations in relation to one another during the time of the eclipse,

there are various types of eclipses in our solar system. For instance, a lunar eclipse occurs when the earth passes between the moon and the sun.

For the solar eclipse to happen the light from the sun is obstructed by the moon observing from the earth.

The buddies left Earth because they could view the whole eclipse, but you were on the moon and only saw parts of the eclipse turn black.

To learn more about the eclipse from here, refer to the link;

brainly.com/question/4279342

#SPJ2

Answer:

The answer is "Option B".

Explanation:

[tex]r=15\times 10^{7}\ km\ = 15\times 10^{10}\ m\\\\w=\frac{2\pi}{1\ year}\\\\=\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec}\\\\a=w^2r\\\\=(\frac{2\pi}{1\times 365.24 \times 24 \times 60 \times 60\ sec})^2 \times 15 \times 10^{10}\ \frac{m}{s^2}\\\\[/tex]

[tex]=5.940 \times 10^{-3} \ \frac{m}{s^2}\\\\=6 \times 10^{-3} \ \frac{m}{s^2}\\\\=0.006\ \frac{m}{s^2}\\\\[/tex]

Answer:

  E_ {total} = [tex]\frac{Q }{L^2 \epsilon_o}[/tex]

Explanation:

In this exercise you are asked to calculate the electric field between two plates, the electric field is a vector

         E_ {total} = E₁ + E₂

         E_ {total} = 2 E

where E₁ and E₂ are the fields of each plate, we have used that for the positively charged plate the field is outgoing and for the negatively charged plate the field is incoming, therefore in the space between the plates for a test charge the two fields point in the same direction

to calculate the field created by a plate let's use Gauss's law

          Ф = ∫ E . dA = q_{int} /ε₀

As a Gaussian surface we use a cylinder with the base parallel to the plate, therefore the direction of the electric field and the normal to the surface are parallel, therefore the scalar product is reduced to the algebraic product.

           E 2A = q_{int} / ε₀

where the 2 is due to the surface has two faces

indicate that the surface has a uniform charge for which we can define a surface density

           σ = q_{int} / A

           q_{int} = σ A

we substitute

           E 2A = σ A /ε₀

           E = σ / 2ε₀  

therefore the total field is

           E_ {total} = σ /ε₀

let's substitute the density for the charge of the whole plate

           σ= Q / L²

            E_ {total} = [tex]\frac{Q }{L^2 \epsilon_o}[/tex]

Explanation:

OGLE-2005-BLG-390Lb.

PSR B1620-26 b. Surface Temperature: 72 Kelvin. ...

Neptune. Surface Temperature: 72 Kelvin. ...

Uranus. Surface Temperature: 76 Kelvin. ...

Saturn. Surface Temperature: 134 Kelvin. ...

Jupiter. Image Courtesy: NASA. ...

OGLE-2016-BLG-1195Lb. Surface Temperature: Unknown

Answer:

The correct solution is:

(a) 1.66

(b) 1.05

Explanation:

Given:

Bending stress,

[tex]\sigma_b = 25 \ kpsi[/tex]

Torsional stress,

[tex]\tau= 15 \ kpsi[/tex]

Yield stress of steel bar,

[tex]\delta_y = 60 \ kpsi[/tex]

As we know,

⇒ [tex]\sigma_{max}^' \ = \sqrt{\sigma_b^2 + 3 \gamma^2}[/tex]

        [tex]= \sqrt{(25)^2+3(15)^2}[/tex]

        [tex]=36.055 \ kpsi[/tex]

(a)

The factor of safety against static failure will be:

⇒ [tex]\eta_y = \frac{\delta_y}{\sigma_{max}^'}[/tex]

By putting the values, we get

        [tex]=\frac{60}{36.055}[/tex]

        [tex]=1.66[/tex]

(b)

According to the Goodman line failure,

[tex]\sigma_a = \sigma_b = 25 \ kpsi[/tex]

[tex]S_e = 40 \ kpsi[/tex]

[tex]\sigma_m = \sqrt{3} \tau[/tex]

     [tex]=\sqrt{3}\times 15[/tex]

     [tex]=26 \ kpsi[/tex]

[tex]Sut = 80 \ kpsi[/tex]

⇒ [tex]\frac{\sigma_a}{S_e} +\frac{\sigma_m}{Sut} =\frac{1}{\eta_y}[/tex]

      [tex]\frac{25}{40}+\frac{26}{80}=\frac{1}{\eta_y}[/tex]

              [tex]\eta_y = 1.05[/tex]

Answer:

Newton's First Law of Motion states that a body will stay at rest or continue its path with constant velocity unless an external force acts upon it. Newton's Second Law of Motion states that the net force that acts upon a body is equal to the mass of the body multiplied by the acceleration due to the net force.

Answer:

salt

Explanation:

salt is a component for many acid base reactions

Complete Question

The Question diagram is attached below

Answer:

a)  [tex]W_{Fg}= 12500 Nm[/tex]

b)  [tex]W_{T_1}= - 6339.3Nm[/tex]

c)  [tex]W_{T_2}= - 3662.8Nm[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=255kg[/tex]

Distance [tex]d=4m[/tex]

Generally the equation for Work done is mathematically given by

[tex]W=F*d[/tex]

For [tex]F_g[/tex]

[tex]W_{Fg}=2500 x 5.3[/tex]

[tex]W_{Fg}= 12500 Nm[/tex]

For [tex]T_1[/tex]

[tex]W_{T_1}= - {1830 sin(60) x 4}[/tex]

[tex]W_{T_1}= - 6339.3Nm[/tex]

For [tex]T_2[/tex]

[tex]W_{T_2}= - {1295 sin(45) x 4}[/tex]

[tex]W_{T_2}= - 3662.8Nm[/tex]

Answer:

   t = 2.09 10⁻³ s

Explanation:

We must solve this problem in parts, first we look for the acceleration of the electron and then the time to travel the distance

let's start with Newton's second law

        ∑ F = m a

the force is electric

        F = q E

we substitute

        q E = m a

        a = [tex]\frac{q}{m} \ E[/tex]

        a = [tex]\frac{1.6 \ 10^{-19}}{ 9.1 \ 10^{-31} } \ 7.8 \ 10^{-9}[/tex]

        a = 1.37 10³ m / s²

now we can use kinematics

        x = v₀ t + ½ a t²

indicate that rest starts v₀ = 0

        x = 0 + ½ a t²

        t = [tex]\sqrt{\frac{2x}{a} }[/tex]

        t = [tex]\sqrt{\frac {2 \ 3 \ 10^{-3}}{ 1.37 \ 10^3} }[/tex]

        t = 2.09 10⁻³ s

Answer:

the magnitude of the magnetic field is 1.23 x 10⁸ T.

Explanation:

Given;

magnitude of the electric field, E = 3.7 V/m

The magnitude of the magnetic field is calculated as;

E = cB

where;

B is the magnitude of the magnetic field

c is the speed of light = 3 x 10⁸ m/s

From the above equation, the magnetic field, B, is calculated as;

[tex]B = \frac{E}{c} \\\\B = \frac{3.7 }{3\times 10^8 } \\\\B = 1.23 \times 10^{-8 } \ T[/tex]

Therefore, the magnitude of the magnetic field is 1.23 x 10⁸ T.

Answer:

Answer:

Microwave is a types of a electromagnetic radiation

Answer:

Transvers

Explanation:

Because microwave is electromagnetic  waves and all electromagnetic waves are transvers.

Answer:

the change in the kinetic energy of the system is -42.47 J

Explanation:

Given;

mass A, Ma = 2 kg

initial velocity of mass A, Ua = 15 m/s

Mass M, Mm = 4 kg

initial velocity of mass M, Um = 7 m/s

Let the common velocity of the two masses after collision = V

Apply the principle of conservation of linear momentum, to determine the final velocity of the two masses;

[tex]M_aU_a + M_mU_m = V(M_a + M_m)\\\\(2\times 15 )+ (4\times 7) = V(2+4)\\\\58 = 6V\\\\V = \frac{58}{6} = 9.67 \ m/s[/tex]

The initial kinetic of the two masses;

[tex]K.E_i = \frac{1}{2} M_aU_a^2 \ + \ \frac{1}{2} M_mU_m^2\\\\K.E_i = (0.5 \times 2\times 15^2) \ + \ (0.5 \times 4\times 7^2)\\\\K.E_i = 323 \ J[/tex]

The final kinetic energy of the two masses;

[tex]K.E_f = \frac{1}{2} M_aV^2 \ + \ \frac{1}{2} M_mV^2\\\\K.E_f = \frac{1}{2} V^2(M_a + M_m)\\\\K.E_f = \frac{1}{2} \times 9.67^2(2+ 4)\\\\K.E_f = 280.53 \ J[/tex]

The change in kinetic energy is calculated as;

[tex]\Delta K.E = K.E_f \ - \ K.E_i\\\\\Delta K.E = 280.53 \ J \ - \ 323 \ J\\\\\Delta K.E = -42.47 \ J[/tex]

Therefore, the change in the kinetic energy of the system is -42.47 J