Flapping flight is very energy intensive. A wind tunnel test
on an 89 g starling showed that the bird used 12 W of
metabolic power to fly at 11 m/s. What is its metabolic power for starting flight?

Answer:

TRUE

Explanation:

Answer:

θ₄ = 37.2º

Explanation:

For this exercise it must be solved in two parts, the first part we look for the critical angle, for this we use the law of refraction with the angle in the middle of transmission of tea = 90º

        n₁ sin θ₁= n₂ sin  90

        θ₁ = sin⁻¹ [tex]\frac{n_2}{n_1}[/tex]

        θ₁ = sin⁻¹ (1.33 / 1.43)

        θ₁ = 68.4º

They indicate that the angle of incidence is half of the critical angle

        θ₃ = 68.4 / 2 = 34.2º

Let's use the law of refraction again

         n₁ sin θ₃ = n₂ sin θ₄

         sin θ₄ = [tex]\frac{n_1}{n_2}[/tex]   sin θ₃

         sin θ₄ = [tex]\frac{1.43}{1.33}[/tex]  sin 34.2

         θ₄ = sin⁻¹ 0.604345

        θ₄ = 37.2º

Answer:

The launched angle θ = 30 degrees, the initial velocity Vo = 20 m/s, the initial horizontal velocity Vox= ?, the initial vertical velocity Voy = ?, the time of flight t = ? the maximum height h = ?

Vox = Vo * (cos of 30 degrees)

Voy = Vo * (sin of 30 degrees)

t = 2 * (Voy / g)

h = Voy * 0.5 t - 1/2 g * (0.5t)^2

I have given the equations for you to use, just plug – in the values and then solve in a step by step manner.

Answer:

approximately 15.68 meters.

Explanation:

Here is how;

First, let's calculate the time of flight for the t-shirt. We can use the vertical motion equation:

y = y0 + v0y * t - 0.5 * g * t^2

where:

y is the vertical displacement (27.7 m)

y0 is the initial vertical position (0 m)

v0y is the vertical component of the initial velocity (v0 * sin(theta))

g is the acceleration due to gravity (9.8 m/s^2)

t is the time of flight

Plugging in the values:

27.7 = 0 + (25.8 * sin(63.6°)) * t - 0.5 * 9.8 * t^2

Simplifying the equation, we get a quadratic equation:

4.9t^2 - (25.8 * sin(63.6°))t + 27.7 = 0

Solving this quadratic equation will give us the time of flight, t. Using the quadratic formula, we find that:

t ≈ 1.23 s

Now, let's find the horizontal displacement of the t-shirt using the horizontal motion equation:

x = x0 + v0x * t

where:

x is the horizontal displacement

x0 is the initial horizontal position (0 m)

v0x is the horizontal component of the initial velocity (v0 * cos(theta))

t is the time of flight

Plugging in the values:

x = 0 + (25.8 * cos(63.6°)) * 1.23

Calculating this:

x ≈ 14.92 m

The t-shirt falls short of reaching the person by the horizontal distance of:

Shortfall = 30.6 m - 14.92 m

Calculating this:

Shortfall ≈ 15.68 m

Therefore, the t-shirt will be approximately 15.68 meters short of reaching the person.

Answer:

T1 = 736.6 N, T2 = 193.5 N

Explanation:

W = 76 N

The tension is T1 and T2.

By use of Lami's theorem

[tex]\frac{T_1}{Sin100}=\frac{T_2}{Sin165}=\frac{W}{Sin 95}\\\\So, \\\\T_1 = \frac{76\times 9.8\times Sin 100}{Sin 95} = 736.6 N \\And\\T_2 = \frac{76\times 9.8\times Sin 165}{Sin 95} = 193.5 N \\[/tex]

Answer:

the energy released or created is  4.5 x 10¹⁸ J

Explanation:

Given;

mass of the given matter (man), m = 50 kg

Apply Einstein's mass defect equation.

When a mass of any given matter is completely destroyed, the energy released is calculated as follows;

E = mc²

where;

E is the released or created

c is the speed of light = 3 x 10⁸ m/s

E = (50) x (3 x 10⁸)²

E = 4.5 x 10¹⁸ J

Therefore, the energy released or created is  4.5 x 10¹⁸ J

Answer:

A green object will absorb all light except for green light and reflect blue and yellow light.

Answer:

Option D.

Explanation:

From the question given above, the following data were obtained:

Force applied (F) = 5 N

Extention (e) = 0.075 m

Spring constant (K) =?

The spring constant for the spring can be obtained as follow:

F = Ke

5 = K × 0.075

Divide both side by 0.075

K = 5 / 0.075

K = 67 N/m

Thus, the spring constant for the spring is 67 N/m

Answer: D. 0 m

Explanation:

Concept:

Here, we need to know the concept of displacement.

Displacement is defined to be the change in position of an object.

The difference between displacement and distance is the total movement of an object without any regard to direction, while displacement is the pure change of position.

If you are still confused, please refer to the attachment below for a graphical explanation.

Solve:

STEP ONE: the boy walks from point C to point D (a distance of 50 m)

C ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ D

                                              50 m

STEP TWO: the boy walks from point D to point C (a distance of 50 m)

D ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ C

                                               50 m

STEP THREE: find the displacement

The boy started with point C

The boy ended with point C

He did not change his position throughout the journey.

Therefore, his displacement is 0 m.

Hope this helps!! :)

Please let me know if you have any questions

Explanation:

Given:

t = 20 seconds

x = 3000 m

y = 450 m

a) To find the vertical component of the initial velocity [tex]v_{0y}[/tex], we can use the equation

[tex]y = v_{0y}t - \frac{1}{2}gt^2[/tex]

Solving for [tex]v_{0y}[/tex],

[tex]v_{0y} = \dfrac{y + \frac{1}{2}gt^2}{t}[/tex]

[tex]\:\:\:\:\:\:\:=\dfrac{(450\:\text{m}) + \frac{1}{2}(9.8\:\text{m/s}^2)(20\:\text{s})^2}{(20\:\text{s})}[/tex]

[tex]\:\:\:\:\:\:\:=120.5\:\text{m/s}[/tex]

b) We can solve for the horizontal component of the velocity [tex]v_{0x}[/tex] as

[tex]x = v_{0x}t \Rightarrow v_{0x} = \dfrac{x}{t} = \dfrac{3000\:\text{m}}{20\:\text{s}}[/tex]

or

[tex]v_{0x} = 150\:\text{m/s}[/tex]

Answer:

杰杰伊杜杜杜伊格富尔杰迪耶赫分离福音

Explanation:

莱德利 · 赫耶尔伊 3uritievrirjrirhruebwkwieheoo2hfjcbvi3hd

Answer:

B velocity

Explanation:

Answer:

Answer:

vdhdbdnnsnsbdhhshzbhshsbbsbd is not ask you to be able and r in the exam qq and

Answer:

φ = 13.43 x 10⁻¹⁹ J = 8.4 eV

Explanation:

Using the Einstein's Photoelectric equation:

Energy of Photon = Work Function + Kinetic Energy of Electron

[tex]\frac{hc}{\lambda} = \phi + K.E[/tex]

where,

h = Plank's Constant = 6.625 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength = 124 nm = 1.24 x 10⁻⁷ m

φ = work function = ?

K.E = Kinetic Energy of Electrons = (4.16 eV)([tex]\frac{1.6\ x\ 10^{-19}\ J}{1\ eV}[/tex]) = 2.6 x 10⁻¹⁹ J

Therefore,

[tex]\frac{(6.625\ x\ 10^{-34}\ J.s)(3\ x\ 10^8\ m/s)}{1.24\ x\ 10^{-7}\ m} = \phi + 2.6\ x\ 10^{-19}\\\\\phi=16.03\ x\ 10^{-19}\ J - 2.6\ x\ 10^{-19}\ J[/tex]

φ = 13.43 x 10⁻¹⁹ J = 8.4 eV

Temperature in kelvin scale=300k

We know

[tex]\boxed{\sf 0°C=273K}[/tex]

[tex] \\ \Large\sf\longmapsto 300K[/tex]

[tex] \\ \Large\sf\longmapsto 300-273[/tex]

[tex] \\ \Large\sf\longmapsto 27°C[/tex]

Answer:

The pressure near the surface of the pool will be less as compared that the bottom of the pool as water has weight. This is in relation to gravity

Explanation:

Answer:

Acceleration:

[tex]{ \tt{a = \frac{v - u}{t} }} \\ { \tt{a = \frac{20 - 10}{5} }} \\ { \tt{a = 2 \: m {s}^{ - 2} }}[/tex]

From third equation:

[tex]{ \bf{ {v}^{2} = {u}^{2} + 2as}} \\ { \tt{s = \frac{ {20}^{2} - {10}^{2} }{2 \times 2} }} \\ = { \tt{s = 75 \: m}}[/tex]

Answer:

Formula = m/s

Explanation:

The answer is 10 m / 5 seconds = 2 meters distance

The answer is 20 m / 5 seconds = 4 meters distance

Answer:

0.023 Ohms

Explanation:

Given data

Length= 2.8m

radius= 1.03mm

current I= 1.35 A

voltage V= 0.032V

We know that from Ohm's law

V= IR

Now  R= V/I

Substitute

R= 0.032/1.35

R= 0.023 Ohms

Hence the resistance is 0.023 Ohms

Answer:

The block will not move.

Explanation:

We'll begin by calculating the frictional force. This can be obtained as follow:

Coefficient of friction (µ) = 0.6

Mass of block (m) = 3 Kg

Acceleration due to gravity (g) = 10 m/s²

Normal reaction (R) = mg = 3 × 10 = 30 N

Frictional force (Fբ) =?

Fբ = µR

Fբ = 0.6 × 30

Fբ = 18 N

From the calculations made above, the frictional force of the block is 18 N. Since the frictional force (i.e 18 N) is bigger than the force applied (i.e 14 N), the block will not move.

Answer:

V = 168 km³

Explanation:

...............

Answer:

The rise in temperature is 0.06 K.

Explanation:

mass of bullet, m = 15 g

initial speed, u = 865 m/s

final speed, v = 534 m/s

mass of water, M = 13.5 kg

specific heat of water, c = 4200 J/kg K

The change in kinetic energy

[tex]K = 0.5 m(u^2 - v^2)\\\\K = 0.5\times 0.015\times (865^2-534^2)\\\\K = 3473 J[/tex]

According to the conservation of energy, the change in kinetic energy is used to heat the water.

K = m c T

where, T is the rise in temperature.

3473 = 13.5 x 4200 x T

T = 0.06 K

Answer:

down below

Explanation:

Image 1- wheels of train showing both translatory motion as well as rotatory motion.

Image 2- rotation of ball shows both rotatory motion as well as translatory motion.

Image 3- the earth rotates about its axis, same time it revolves around the sun thus showing both rotatory motion and curvilinear motion in a fixed time. (perodic motion)

Image 4- while cutting wood, the

carpenter's saw has both

translatory motion and oscillatory

motion, as it moves down while

oscillating.

Answer:

Explanation:

kinematic equation (g will have a negative value if we assume UP is positive)

v² = u² + 2as

a) v = √(0² + 2(g)(y - h))

b) v = √(vi² + 2(g)(y - h))

Answer:

hhhhhhhjjjkkllkcftkbgfjknhglncg

Answer:

Explanation:

The formula for determining the Emf induced in a loop is:

[tex]\varepsilon = \dfrac{d \phi}{dt}[/tex]

[tex]\varepsilon = \dfrac{d (B*A)}{dt}[/tex]

[tex]\varepsilon = A \times \dfrac{dB}{dt}[/tex]

[tex]\varepsilon = (side (l))^2 \times \dfrac{dB}{dt}[/tex]

where;

square area A = ( l²)

l² = 6.0 cm = 6.0 × 10⁻²

∴

[tex]\varepsilon = ( 6.0 \times 10^{-2})^2 \times 5.0 \times 10^{-3} \ T/S[/tex]

[tex]\varepsilon =18 \times 10^{6} \ V[/tex]

Recall that:

The resistivity of copper = [tex]1.68 \times 10^{-8}[/tex] ohm m

We can as well say that the length of the copper wire = perimeter of the square loop;

The perimeter of the square loop = 4L

Thus, the length of the copper wire  = 4 (6.0 × 10⁻² )m

= 24× 10⁻² m

Finally, the current in the loop is determined from the formula:

V = IR

where,

V = voltage

I = current and R = resistance of the wire

Making "I" the subject:

I = V/R

where;

[tex]R = \dfrac{\rho \times l}{A}[/tex]

[tex]R = \dfrac{\rho \times l}{\pi * r^2}[/tex]

[tex]R = \dfrac{1.68 *10^{-8} \times 24*10^{-2}}{\pi * (1*10^{-3})^2}[/tex]

[tex]R = 0.001283 \ ohms[/tex]

∴

[tex]I = \dfrac{18*10^{-6}}{0.001283}[/tex]

I = 14.029 mA

Answer:

The lowest possible frequency of sound for which this is possible is 1307.69 Hz

Explanation:

From the question, Abby is standing 5.00m in front of one of the speakers, perpendicular to the line joining the speakers.

First, we will determine his distance from the second speaker using the Pythagorean theorem

l₂ = √(2.00²+5.00²)

l₂ = √4+25

l₂ = √29

l₂ = 5.39 m

Hence, the path difference is

ΔL = l₂ - l₁

ΔL = 5.39 m - 5.00 m

ΔL = 0.39 m

From the formula for destructive interference

ΔL = (n+1/2)λ

where n is any integer and λ is the wavelength

n = 1 in this case, the lowest possible frequency corresponds to the largest wavelength, which corresponds to the smallest value of n.

Then,

0.39 = (1+ 1/2)λ

0.39 = (3/2)λ

0.39 = 1.5λ

∴ λ = 0.39/1.5

λ = 0.26 m

From

v = fλ

f = v/λ

f = 340 / 0.26

f = 1307.69 Hz

Hence, the lowest possible frequency of sound for which this is possible is 1307.69 Hz.

Answer:

Distance is a scalar quantity that refers to "how much ground an object has covered" during its motion. Displacement is a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.

Explanation:

Answer:

The depth of the resulting stream is 3.8 meters.

Explanation:

Under the assumption that streams are formed by incompressible fluids, so that volume flow can observed conservation:

[tex]\dot V_{1} + \dot V_{2} = \dot V_{3}[/tex] (1)

All volume flows are measured in cubic meters per second.

Dimensionally speaking, we can determine the depth of the resulting stream ([tex]h_{3}[/tex]), in meters, by expanding (1) in this manner:

[tex]w_{1}\cdot h_{1}\cdot v_{1} + w_{2}\cdot h_{2}\cdot v_{2} = w_{3}\cdot h_{3}\cdot v_{3}[/tex]

[tex]h_{3} = \frac{w_{1}\cdot h_{1}\cdot v_{1}+w_{2}\cdot h_{2}\cdot v_{2}}{w_{3}\cdot v_{3}}[/tex] (2)

[tex]v_{1}, v_{2}[/tex] - Speed of the merging streams, in meters per second.

[tex]h_{1}, h_{2}[/tex] - Depth of the merging streams, in meters.

[tex]w_{1}, w_{2}[/tex] - Width of the merging streams, in meters.

[tex]w_{3}[/tex] - Width of the resulting stream, in meters.

[tex]v_{3}[/tex] - Speed of the resulting stream, in meters per second.

If we know that [tex]w_{1} = 8.3\,m[/tex], [tex]h_{1} = 3.2\,m[/tex], [tex]v_{1} = 2.2\,\frac{m}{s}[/tex], [tex]w_{2} = 6.8\,m[/tex], [tex]h_{2} = 3.2\,m[/tex], [tex]v_{2} = 2.4\,\frac{m}{s}[/tex], [tex]w_{3} = 10.4\,m[/tex] and [tex]v_{3} = 2.8\,\frac{m}{s}[/tex], then the depth of the resulting stream is:

[tex]h_{3} = \frac{(8.3\,m)\cdot (3.2\,m)\cdot \left(2.2\,\frac{m}{s} \right) + (6.8\,m)\cdot (3.2\,m)\cdot \left(2.4\,\frac{m}{s} \right)}{(10.4\,m)\cdot \left(2.8\,\frac{m}{s} \right)}[/tex]

[tex]h_{3} = 3.8\,m[/tex]

The depth of the resulting stream is 3.8 meters.

Answer:

The initial velocity is 1.27 m/s.

Explanation:

distance, s = 1.8 m

acceleration, a = - 0.45 m/s^2

final velocity, v = 0

let the initial velocity is u.

Use third equation of motion

[tex]v^2 = u^2 + 2 a s \\\\0 = u^2 - 2 \times 0.45\times 1.8\\\\u = 1.27 m/s[/tex]

We have that the Initial velocity  is mathematically given as

u=1.27m/s

Question Parameters:

a slight push toward an end stop 1.80 meters away

he fan of the cart engages and slows the cart with an acceleration of -0.45 m/s2

Generally the equation for the  third equation of motion    is mathematically given as

Vf^2 = Vi^2 + 2ad

Therefore

0=u^2+0.45*1.8

u=1.27m/s

For more information on velocity visit

https://brainly.com/question/17617636

Answer:

0.37 m

Explanation:

Given :

Window height, [tex]h_1[/tex] = 1.27 m

The flowerpot falls 0.84 m off the window height, i.e.

[tex]h_2[/tex] = (1.27 x 0.84 ) m in a time span of [tex]$t=\frac{8}{30}$[/tex]   seconds.

Assuming that the speed of the pot just above the window is v then,

[tex]h_2=ut+\frac{1}{2}gt^2[/tex]

[tex]$(1.27 \times 0.84) = v \times \left( \frac{8}{30} \right) + \frac{1}{2} \times 9.81 \times \left( \frac{8}{30} \right)^2$[/tex]

[tex]$v=\left(\frac{30}{8}\right) \left[ (1.27 \times 0.84) - \left( \frac{1}{2} \times 9.81 \times \left( \frac{8}{30 \right)^2 \right) \right]}$[/tex]

[tex]$v= 2.69$[/tex] m/s

Initially the pot was dropped from rest. So,  u = 0.

If it has fallen from a height of h above the window then,

[tex]$h = \frac{v^2}{2g}$[/tex]

[tex]$h = \frac{(2.69)^2}{2 \times 9.81}$[/tex]

h = 0.37 m