Explanation:
Given that,
Maximum potential, V = 4. mV
Distance, d = 0.350 m
Frequency of the wave, f = 100 Hz
(a) The maximum electric field strength created is given by:
[tex]E=\dfrac{V}{d}\\\\E=\dfrac{4.1\times 10^{-3}}{0.350 }\\\\E=0.0117\ V/m[/tex]
(b) The corresponding maximum magnetic field strength in the electromagnetic wave is given by :
[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.0117}{3\times 10^8}\\\\B=3.9\times 10^{-11}\ T[/tex]
(c) The wavelength of the electromagnetic wave can be calculated as :
[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{100}\\\\=3\times 10^6\ m[/tex]
So, the wavelength of the electromagnetic wave is [tex]3\times 10^6\ m[/tex].
what is simple machine?
Explanation:
Those tools that helps to make our work easier ,faster and more convenient in our daily life it is called simple Machine.
why do atom absorb photon since it makes it unstable??
[tex]\textsf{When an electron is hit by a }[/tex] [tex]\textsf{photon of light, it absorbs the quanta}[/tex] [tex]\textsf{of energy the photon was carrying}[/tex] [tex]\textsf{and moves to a higher energya}[/tex] [tex]\textsf{ state. Electrons therefore have to }[/tex] [tex]\textsf{jump around within the atom as }[/tex] [tex]\textsf{they either gain or lose energy. }[/tex]
When an electron is hit by a photon of light, it absorbs the quanta of energy the photon was carrying and moves to a higher energy state. Electrons therefore have to jump around within the atom as they either gain or lose energy.
Hope this answer helps you..!!!
.
.
Select it as the BRAINLIEST..!!
Which of the following is not an example of approximate simple harmonic motion
Answer:
where are the options
it's not full question
When a charged particle moves at an angle of 26.1 with respect to a magnetic field, it experiences a magnetic force of magnitude F. At what angle (less than 90o) with respect to this field will this particle, moving at the same speed?
Answer:
The angle is 153.9 degree.
Explanation:
Let the magnetic field is B and the charge is q. Angle = 26.1 degree
The force is F.
Let the angle is A'.
Now equate the magnetic forces
[tex]q v B sin 26.1 = q v B sin A'\\\\A' = 180 - 26.1 = 153.9[/tex]
Xác định ứng lực trong các thanh BC,
CF và FE của hệ giàn và chỉ rõ các thanh
chịu kéo hay nén. Cho P1=P2=600 lb,
P3=800 lb
Answer:
............................................
Explanation:
A gymnast weighs 450 N. She stands on a balance beam of uniform construction which weighs 250 N. The balance beam is 3.0 m long and is supported at each end. If the support force at the right end is four times the force at the left end, how far from the right end is the gymnast
Answer:
x = 9.32 cm
Explanation:
For this exercise we have an applied torque and the bar is in equilibrium, which is why we use the endowment equilibrium equation
Suppose the counterclockwise turn is positive, let's set our reference frame at the left end of the bar
- W l / 2 - W_{child} x + N₂ l = 0
x = [tex]\frac{-W l/2 + n_2 l}{W_{child}}[/tex] 1)
now let's use the expression for translational equilibrium
N₁ - W - W_(child) + N₂ = 0
indicate that N₂ = 4 N₁
we substitute
N₁ - W - W_child + 4 N₁ = 0
5 N₁ -W - W_{child} = 0
N₁ = ( W + W_{child}) / 5
we calculate
N₁ = (450 + 250) / 5
N₁ = 140 N
we calculate with equation 1
x = -250 1.50 + 4 140 3) / 140
x = 9.32 cm
Definition of distance in physics
Answer:
Distance is a scalar quantity that refers to "how much ground an object has covered" during its motion. Displacement is a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.
Explanation:
Total Internal Reflection: A ray of light in glass strikes a water-glass interface at an angle of incidence equal to one-half the critical angle for that interface. The index of refraction for water is 1.33, and for the glass it is 1.43. What angle does the refracted ray in the water make with the normal
Answer:
θ₄ = 37.2º
Explanation:
For this exercise it must be solved in two parts, the first part we look for the critical angle, for this we use the law of refraction with the angle in the middle of transmission of tea = 90º
n₁ sin θ₁= n₂ sin 90
θ₁ = sin⁻¹ [tex]\frac{n_2}{n_1}[/tex]
θ₁ = sin⁻¹ (1.33 / 1.43)
θ₁ = 68.4º
They indicate that the angle of incidence is half of the critical angle
θ₃ = 68.4 / 2 = 34.2º
Let's use the law of refraction again
n₁ sin θ₃ = n₂ sin θ₄
sin θ₄ = [tex]\frac{n_1}{n_2}[/tex] sin θ₃
sin θ₄ = [tex]\frac{1.43}{1.33}[/tex] sin 34.2
θ₄ = sin⁻¹ 0.604345
θ₄ = 37.2º
Circular Motion of Charges: A charged particle is observed traveling in a circular path of radius R in a uniform magnetic field. If the particle were traveling twice as fast, the radius of the circular path would be
Answer:
V = 168 km³
Explanation:
...............
An astronaut on the moon drops a rock from rest. The rock falls 0.8m in one second of falling time. If the dropped rock fell for a total of two seconds of time instead of 1 second, then the distance traveled would be:____.
A) The same.
B) Doubled.
C) Tripled.
D) Quadruple.
E) None of the above.
Answer:
D) Quadruple.
Explanation:
We will use the second equation of motion to solve this problem:
[tex]s = v_it + \frac{1}{2}gt^2[/tex]
where,
s = distance travelled by the rock
vi = initial speed of rock = 0 m/s
t = time taken
g = acceleration due to gravity on the surface of the moon
Therefore,
[tex]s = (0\ m/s)t+\frac{1}{2}gt^2\\\\s =\frac{1}{2}gt^2[/tex]----------- equation (1)
Now, we double the time:
[tex]s' = \frac{1}{2}g(2t)^2\\\\s' = 4(\frac{1}{2}gt^2)[/tex]
using equation (1):
s' = 4s
Hence, the correct option is:
D) Quadruple.
A charge is moving in a magnetic field that points to the
left
What direction can the charge move and experience no
magnetic force? Check all that apply.
O up
O down
Oleft
Oright
O into the screen
O out of the screen
Answer:
Magnetic Forces on Moving Charges. The magnetic force on a free moving charge is perpendicular to both the velocity of the charge and the magnetic field with direction given by the right hand rule.
The direction of the charge where it does not experience magnetic force is left and right. The correct option is C and D.
What is a magnetic field?A magnetic field is a region in space where a magnetic force can be observed. It is created by moving electric charges, such as electrons, and is characterized by the direction and strength of the force it exerts on other magnetic materials or moving charges.
Magnetic field lines are used to visualize the direction and strength of the magnetic field. They represent the path that a small magnetic north pole would follow if placed in the magnetic field. The direction of the magnetic field is given by the direction in which the north pole of a compass needle would point if placed in the field.
Magnetic flux is the measure of the strength of the magnetic field passing through a surface. It is given by the product of the magnetic field strength and the area of the surface, as well as the cosine of the angle between the magnetic field and the surface normal. The unit of magnetic flux is Weber (Wb).
Magnetic flux is important in many applications, such as electric motors and generators, where the interaction between the magnetic field and moving charges produces electrical energy. It is also used in magnetic imaging techniques, such as MRI, to visualize the internal structures of the human body.
Here in the question,
Options A (up), B (down), E (into the screen), and F (out of the screen) are all perpendicular to the direction of the magnetic field and so will experience a magnetic force.
Therefore, options C and D are correct i. e left and right.as they are parallel and anti-parallel to the direction of the magnetic field, respectively.
To learn about Ohm's law click:
brainly.com/question/29775285
#SPJ7
how many rings does saturn have
Answer:
From far away, Saturn looks like it has seven large rings. Each large ring is named for a letter of the alphabet. The rings were named in the order they were discovered.
A car can go from 0 to 60 m/s in 5 seconds. What is the acceleration?
A) 50 m/s^2
B) 6 m/s^2
C) 12 m/s^2
D) 300 m/s^2
I think it’s 12 because I did the difference divided by 5 but some places said there was no acceleration
Answer:
12
Explanation:
i agree the answer is 12 because the acceleration is given by the difference in the velocity divided by the time taken
a=v-u/t
60-0/5
=12m/s²
I hope this helps
A) In terms of electrolysis, it’s been said from multiple sources online that “Using water's density and relative atomic populations, it is estimated by a mass balance that approximately 2.38 gallons of water are consumed as a feedstock to produce 1 kg of hydrogen gas (14.13 liters), assuming no losses.”
B) However, 1 Gallon of water is said to contain approximately 4,707 liters of hydrogen.
How can both statements be correct under normal atmospheric conditions, since even with 80% efficiency of current PEM electrolyzers the first statement (A) is nowhere near the +4,000 liters of the second approximation (B)?
Answer:
hhhhhhhjjjkkllkcftkbgfjknhglncg
The potential difference between the plates of a capacitor is 234 V. Midway between the plates, a proton and an electron are released. The electron is released from rest. The proton is projected perpendicularly toward the negative plate with an initial speed. The proton strikes the negative plate at the same instant the electron strikes the positive plate. Ignore the attraction between the two particles, and find the initial speed of the proton.
I have tried looking at the cramster.com solution manual and do not like the way it is explained. Simply put, I cannot follow what is going on and I am looking for someone who can explain it in plain man's terms and help me understand and get the correct answer. I am willing to give MAX karma points to anyone who can help me through this. Thank you kindly.
Answer:
The speed of proton is 2.1 x 10^5 m/s .
Explanation:
potential difference, V = 234 V
let the initial speed of the proton is v.
The kinetic energy of proton is
KE = q V
[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]
Which circuit element is of special importance in AC circuits?
A. Resistor
B. Ammeter
C. Battery
D. Capacitor
Answer:
Explanation:capacitor
Answer:
Ammeter
Explanation:
pls mark me as a brainlist
1 A thing ring has a mass of 6kg and a radius of 20cm. calculate the rotational inertia.
Answer:
2400kgm²
Explanation:
Rotational inertia=mass x radius²
Một bơm cánh gạt thủy lực có lưu lượng thực là 20lít/phút, tạo áp suất 230 bar, tốc độ bơm là 1400 vòng/phút. Biết công suất đầu vào là 10kW và hiệu suất cơ là 88%.
a) Tính hiệu suất thể tích của bơm
b) Tính thể tích riêng của bơm (cm/vòng). Câu 3 (2,5đ): Thiết kế hệ thống truyền động khí nén để điều khiển 02 xylanh tác động đơn, sử dụng 02 van đảo chiều 3/2 tác động bằng nút nhấn, 02 van tiết lưu - một chiều. Trình bày nguyên lý làm việc của của hệ thống.
Answer:
English please?
Explanation:
Explain in english?
In the diagram, disk 1 has a moment of inertia of 3.4 kg · m2 and is rotating in the counterclockwise direction with an angular velocity of 6.1 rad/s about a frictionless rod passing through its center. A second disk rotating clockwise with an angular velocity of 9.3 rad/s falls from above onto disk 1. The two then rotate as one in the clockwise direction with an angular velocity of 1.8 rad/s. Determine the moment of inertia, in kg · m2, of disk 2.
Answer:
I = 3.6 kg•m²
Explanation:
Conservation of angular momentum
Let's assume CW is the positive direction
3.4(-6.1) + I(9.3) = 3.4(1.8) + I(1.8)
I(9.3 - 1.8) = 3.4(1.8 + 6.1)
I(7.5) = 3.4(7.9)
I = 3.4(7.9)/(7.5) = 3.5813333333...
The moment of inertia of the second disk will be [tex]I=3.58\ kg-m^2[/tex]
What is moment of inertia?The moment of inertia is defined as the product of mass of section and the square of the distance between the reference axis and the centroid of the section.
here it is given that
MOI of disk one [tex]I_1=3.4\ kg-m^2[/tex]
Angular velocity [tex]w_1=6.1\ \frac{rad}{s}[/tex]
Angular velocity of disk two [tex]w=1.8\ \frac{rad}{s}[/tex]
MOI of the disk two [tex]I=?[/tex]
The final angular velocity [tex]w_f= 1.8\ \frac{rad}{sec}[/tex]
Now from the conservation of the momentum the angular momentum before collision will be equal to the angular momentum after collision.
[tex]I_1w_1+I_2w_2=(I_1+I_2)w_f[/tex]
Now put the values in the formula
[tex](3.4\times 6.10)+(I_2\times 9.3)=(3.4+I_2)\times 1.8[/tex]
[tex]I_2=3.58\ kg-m^2[/tex]
Thus the moment of inertia of the second disk will be [tex]I=3.58\ kg-m^2[/tex]
To know more about moment of inertia follow
https://brainly.com/question/18721435
The resistance of the light bulb changed as the voltage (and current) changed. Why does this resistance change occur?
A projectile, fired with unknown initial velocity, lands 20sec later on side of hill, 3000m away horizontally and 450m vertically above its starting point. a) what is the vertical component of its initial velocity? b) what is the horizontal component of velocity?
Explanation:
Given:
t = 20 seconds
x = 3000 m
y = 450 m
a) To find the vertical component of the initial velocity [tex]v_{0y}[/tex], we can use the equation
[tex]y = v_{0y}t - \frac{1}{2}gt^2[/tex]
Solving for [tex]v_{0y}[/tex],
[tex]v_{0y} = \dfrac{y + \frac{1}{2}gt^2}{t}[/tex]
[tex]\:\:\:\:\:\:\:=\dfrac{(450\:\text{m}) + \frac{1}{2}(9.8\:\text{m/s}^2)(20\:\text{s})^2}{(20\:\text{s})}[/tex]
[tex]\:\:\:\:\:\:\:=120.5\:\text{m/s}[/tex]
b) We can solve for the horizontal component of the velocity [tex]v_{0x}[/tex] as
[tex]x = v_{0x}t \Rightarrow v_{0x} = \dfrac{x}{t} = \dfrac{3000\:\text{m}}{20\:\text{s}}[/tex]
or
[tex]v_{0x} = 150\:\text{m/s}[/tex]
Find out other examples of bodies showing more than one type of motion Tabulate your findings.
Answer:
down below
Explanation:
Image 1- wheels of train showing both translatory motion as well as rotatory motion.
Image 2- rotation of ball shows both rotatory motion as well as translatory motion.
Image 3- the earth rotates about its axis, same time it revolves around the sun thus showing both rotatory motion and curvilinear motion in a fixed time. (perodic motion)
Image 4- while cutting wood, the
carpenter's saw has both
translatory motion and oscillatory
motion, as it moves down while
oscillating.
The "Pressure" meter allows you to read the pressure at different depths in the fluid. Place the pressure meter close to the bottom of the pool, and read the pressure. Slowly move the pressure meter toward the surface of the water in the pool and read the pressure at different depths in the pool. What happens to pressure in the fluid as the depth of the fluid decreases?
Answer:
The pressure near the surface of the pool will be less as compared that the bottom of the pool as water has weight. This is in relation to gravity
Explanation:
There is a relationship between volume and pressure. The increase in depth leads to an increase in volume and an increase in the force of gravity near the surface as compared to lifting and rising light pressure as light air rises and heavy air sinks.Tay quay OB quay đều quanh trục cố định đi qua O với vận tốc góc không đổi ω. Con lăn A chuyển động trong rãnh thẳng đứng. Tại vị trí trên hình vẽ thì thanh OB thẳng đứng, OA có phương nằm ngang. Hãy xác định vận tốc góc thanh AB, vận tốc của con lăn A; gia tốc góc của thanh AB, gia tốc của con lăn A. Cho ω = 1,5 rad/s, r = 1 m.
I’m a photoelectric effect, which property of the incident light determines how much kinetic energy the ejected electrons have ?
A) brightness
B) frequency
C) size of the beam
D) none of the above
Answer:
b = frequency
The resistance of a thermistor over a limited range of temperature is given by the equation R= ( c/T-203 )where c is a constant and T is the absolute temperature. What will be the temperature on the Celsius scale of the thermistor at absolute temperature of T = 300K?
Temperature in kelvin scale=300k
We know
[tex]\boxed{\sf 0°C=273K}[/tex]
[tex] \\ \Large\sf\longmapsto 300K[/tex]
[tex] \\ \Large\sf\longmapsto 300-273[/tex]
[tex] \\ \Large\sf\longmapsto 27°C[/tex]
1. There is a famous intersection in Kuala Lumpur, Malaysia, where thousands of vehicles pass each hour. A 750 kg Tesla Model S traveling south crashes into a 1250 kg Ford F-150 traveling east. What are the initial speeds of each vehicle before collision if they stick together after crashing into each other and move at an angle of 320 and a common velocity of 18 m/s.
Solution :
Let the positive [tex]x-axis[/tex] is along the East and the positive [tex]y[/tex] direction is along the north.
Given :
Mass of the Tesla car, [tex]m_1[/tex] = [tex]750 \ kg[/tex]
Mass of the Ford car, [tex]m_2 = 1250 \ kg[/tex]
Now let the initial velocity of Tesla car in the south direction be = [tex]-v_1j[/tex]
The initial momentum of Tesla car, [tex]p_1 = -750 \ v_1[/tex]
Let the initial velocity of Ford car in the east direction be = [tex]v_2 \ i[/tex]
So the initial momentum of the Ford car is [tex]p_2=1250\ v_2 \ i[/tex]
Therefore, the initial velocity of both the cars is [tex]p_i = p_1+p_2[/tex]
[tex]=1250 \ v_2 \ i - 750\ v_1 \ j[/tex]
Now the final velocity of both the cars is [tex]v = 18 \ m/s[/tex]
So the vector form is :
[tex]v = 18\cos 32\ i-18 \sin 32 \ j[/tex]
[tex]= 15.26 \ i - 9.54 \ j[/tex]
Therefore the momentum after the accident is
[tex]p_f=(m_1+m_2) \times v[/tex]
[tex]=(750+1250) \times (15.26 \ i - 9.54 \ j)[/tex]
[tex]= 30520\ i -19080\ j[/tex]
According to the law of conservation of momentum, we know
[tex]p_i = p_f[/tex]
[tex]1250 \ v_2 \ i - 750\ v_1 \ j[/tex] [tex]= 30520\ i -19080\ j[/tex]
[tex]1250 \ v_2 = 30520[/tex]
[tex]v_2=24.4 \ m/s[/tex]
From, [tex]750\ v_1 = 19080[/tex]
We get, [tex]v_1=25.4 \ m/s[/tex]
Therefore the speed of Tesla car before collision = 25.4 m/s
The speed of ford car before collision = 24.4 m/s
An auto mechanic needs to determine the emf and internal resistance of an old battery. He performs two measurements: in the first, he applies a voltmeter to the battery's terminals and reads 11.9 V;11.9 V; in the second, he applies an ammeter to the terminals and reads 16.1 A.16.1 A.
What are the battery's emf E and internal resistance r?
Answer:
Hence the battery's emf E is ε = 11.9 V.
The internal resistance is r = 0.739 ohms.
Explanation:
Now we know that
Voltage V = 11.9 V.
Current I = 16.1 A.
Hence this is an ideal voltmeter there are no current flows when the Voltmeter is applied.
ε = V + I r
∵ I = 0
ε = V
ε = 11.9 V
Then the ammeter is applied.
Let's take ( r ) to be the total resistance which is equal to internal resistance.
V = I r
r = [tex]\frac{V}{I}[/tex]
[tex]= \frac{11.9}{16.1}[/tex]
r = 0.739 ohms
The battery's emf (E) and internal resistance (r) are 11.9 Volts and 0.739 Ampere respectively.
Given the following data:
Voltage = 11.9 Volts.Current = 16.1 Amperes.To determine the battery's emf (E) and internal resistance (r):
How to calculate emf (E).For an ideal voltmeter, there isn't a flow of current and as such the current is equal to 0.
Mathematically, emf (E) is given by this formula:
[tex]E = V + IR[/tex]
Substituting the given parameters into the formula, we have;
[tex]E = 11.9 + 0R\\\\E = 11.9 + 0[/tex]
E = 11.9 Volts.
For the internal resistance (r):
Note: The total resistance is equal to internal resistance.
Applying Ohm's law, we have:
[tex]R = \frac{V}{I} \\\\R = \frac{11.9}{16.1}[/tex]
R = r = 0.739 Ampere.
Read more current here: https://brainly.com/question/25813707
You are a detective investigating why someone was hit on the head by a falling flowerpot. One piece of evidence is a smartphone video taken in a 4th-floor apartment, which happened to capture the flowerpot as it fell past a window. In a span of 8 frames (captured at 30 frames per second), the flowerpot falls 0.84 of the height of the window. You visit the apartment and measure the window to be 1.27 m tall.
Required:
Assume the flowerpot was dropped from rest. How high above the window was the flowerpot when it was dropped?
Answer:
0.37 m
Explanation:
Given :
Window height, [tex]h_1[/tex] = 1.27 m
The flowerpot falls 0.84 m off the window height, i.e.
[tex]h_2[/tex] = (1.27 x 0.84 ) m in a time span of [tex]$t=\frac{8}{30}$[/tex] seconds.
Assuming that the speed of the pot just above the window is v then,
[tex]h_2=ut+\frac{1}{2}gt^2[/tex]
[tex]$(1.27 \times 0.84) = v \times \left( \frac{8}{30} \right) + \frac{1}{2} \times 9.81 \times \left( \frac{8}{30} \right)^2$[/tex]
[tex]$v=\left(\frac{30}{8}\right) \left[ (1.27 \times 0.84) - \left( \frac{1}{2} \times 9.81 \times \left( \frac{8}{30 \right)^2 \right) \right]}$[/tex]
[tex]$v= 2.69$[/tex] m/s
Initially the pot was dropped from rest. So, u = 0.
If it has fallen from a height of h above the window then,
[tex]$h = \frac{v^2}{2g}$[/tex]
[tex]$h = \frac{(2.69)^2}{2 \times 9.81}$[/tex]
h = 0.37 m
Two identical loudspeakers 2.00 m apart are emitting sound waves into a room where the speed of sound is 340 m/s. Abby is standing 5.00 m in front of one of the speakers, perpendicular to the line joining the speakers, and hears a maximum in the intensity of the sound.
Required:
What is the lowest possible frequency of sound for which this is possible?
Answer:
The lowest possible frequency of sound for which this is possible is 1307.69 Hz
Explanation:
From the question, Abby is standing 5.00m in front of one of the speakers, perpendicular to the line joining the speakers.
First, we will determine his distance from the second speaker using the Pythagorean theorem
l₂ = √(2.00²+5.00²)
l₂ = √4+25
l₂ = √29
l₂ = 5.39 m
Hence, the path difference is
ΔL = l₂ - l₁
ΔL = 5.39 m - 5.00 m
ΔL = 0.39 m
From the formula for destructive interference
ΔL = (n+1/2)λ
where n is any integer and λ is the wavelength
n = 1 in this case, the lowest possible frequency corresponds to the largest wavelength, which corresponds to the smallest value of n.
Then,
0.39 = (1+ 1/2)λ
0.39 = (3/2)λ
0.39 = 1.5λ
∴ λ = 0.39/1.5
λ = 0.26 m
From
v = fλ
f = v/λ
f = 340 / 0.26
f = 1307.69 Hz
Hence, the lowest possible frequency of sound for which this is possible is 1307.69 Hz.
