The question requires a good knowledge of the meaning of Tyndall effect or scattering of light by false solutions in chemistry
The student observed a beam of visible light through mixture A because A exhibits Tyndall effect
Tincture of Iodine does not show Tyndall effect because its solution consists of particles less than 1 nanometer in solution.
A solution may be classified as a true solution or a false solution. A true solution consists of particles which are less than 1 nanometer in solution. A true solution does not scatter visible light.
A false solution, on the other hand consists of particles larger than 1 nanometer and does scatter visible light.
Starch in water is an example of a false solution or colloid hence it exhibits Tyndall effect. The scattering of visible light by a solution is known as Tyndall effect.
Tincture of iodine and sodium chloride in water are all true solutions hence they do not scatter visible light.
https://brainly.com/question/23487849
Which atom is abundant on earth
Answer:
Oxygen
Explanation:
Oxygen is abundant on earth
cual es la importancia de los solidos en la vida ?
Answer:
La comida es un sólido y no podemos vivir sin comida. Algunos sólidos son buenos conductores de calor y electricidad; otros son aislantes. Los sólidos se utilizan todos los días en la vida.
cho hỗn hợp gồm alcl3 và fecl3 trình bày cách tách từng muối riêng ra khỏi hỗn hợp
Answer:
ném NaOH vào thì th AlCl3 tan hết còn lại kết tủa Fe(OH)3 lần.
Lọc kết tủa riêng phần dung dịch tan riêng
Rồi Cho HCl vô lại là xong
Explanation:
Choose the answer that is not correct: RER is: Group of answer choices The ratio of carbon dioxide produced to oxygen consumed An indication of the percentage of carbohydrate metabolized An indication of the percentage of lipid metabolized An approximation of kilocalories obtained per liter of oxygen consumed An indication of calories consumed during anaerobic energy production
Answer:
An indication of calories consumed during anaerobic energy production
Explanation:
RER stands for respiratory exchange ratio, which is the ratio of the volume of carbon dioxide, CO₂, produced to the volume of oxygen, O₂ used in metabolism. RER is used in determining the respiratory quotient during aerobic exercise and rest, from which it can be determined if carbohydrate or fat is the source of fuel consumed in the production of energy for the body through metabolism
Therefore, the answer that is not correct is an indication of calories consumed during anaerobic energy production
which statement is generally true about CaCaI2 ?
Explanation:
"Its bonds are formed by large differences in electronegativity" is the statement among the choices given in the question that is generally true about CaCl2.
Two glasses labeled A and B had equal amounts of water. Ted heated the water in one of the glasses. He then put two drops of food coloring into each of the two glasses. The table shows the time taken by the food coloring in the two glasses to spread out.
Which of the following statements is correct?
A - The water in Glass B was heated; therefore, the particles in Glass B have greater kinetic energy and move faster.
B - The water in Glass A was heated; therefore, the particles in Glass A have greater kinetic energy and move faster.
C - The water in Glass B was heated; therefore, the particles in Glass B move slower.
D - The water in Glass A was heated; therefore, the particles in Glass A move slower.
Answer:
The answer is A: The water in Glass B was heated; therefore, the particles in Glass B have greater kinetic energy and move faster.
Explanation:
Think about it, if you boil water, whatever you put in the water is going to move around faster than if you put something in standing water.
(PLEASE mark Brainliest!)
The water in Glass B was heated; therefore, the particles in Glass B have greater kinetic energy and move faster. The correct answer is A.
What is food coloring?Food coloring, or color additive, is any dye, pigment, or substance that imparts color when it is added to food or drink.
The food coloring we add to the water is pushed around by the water molecules. Since the molecules in warm water move around faster, the food coloring spreads out quicker in warm water than in cold water.
From the table, we can say that the water in glass B was heated by Ted and the molecules of food coloring spread out quickly in warm water and they have greater kinetic energy and move faster.
On the other hand, in glass A, the water is cold, so food coloring will not dissolve quickly.
Therefore, The water in Glass B was heated; therefore, the particles in Glass B have greater kinetic energy and move faster. The correct answer is A.
To learn more about food coloring, click here:
https://brainly.com/question/6750847
Out of a box of 46 matches, 22 lit on the first strike. What percentage of the matches in the box did not light on the first strike?
Answer: 52.17%
Explanation:
Number of matches in the box = 46
Number of matches that lit on the first strike = 22
Number of matches that did not light on the first strike = 46 - 22 = 24
Therefore, the percentage of the matches in the box did not light on the first strike will be:
= (Number of matches that did not light on the first strike / Number of matches in the box) × 100
= 24/46 × 100
= 52.17%
Therefore, the percentage of the matches in the box that did not light on the first strike is 52.17%.
PLZ HELP There are two main ways that organisms reproduce, or make more Individuals of their own kind. Which of the following is true of these two types of reproduction?
A. In one way, two parents are involved. In the other, there is only one parent
B. In reproduction that involves only one parent, the offspring are different from the parent. In reproduction that involves two parents, the offspring receive exact copies of the parents' DNA.
C. In both ways, offspring share characteristics with their parents but are not exactly the same. O
D. In both ways, all offspring are identical to each other but maji different from their parents.
Answer:
A
Explanation:
Two parents are involved in Sexual Reproduction but only one is involved in Asexual Reproduction.
What is the pressure in atm exerted by 1.8 g of H2 gas exert in a 4.3 L balloon at 27ºC? R = 0.821(L*atm) / (mol*K)
kakamc cjdismxsjxj xjcodmd xksowmd x
The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm
What is Ideal gas law ?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Let's convert grams to moles (via molar mass).
Molar Mass (H₂) : 2 (1.008 g/mol)
Molar Mass (H₂) : 2.016 g/mol
1.8 grams H₂ 1 mole
---------------------- x ---------------------- = 0.893 moles H₂
2.016 grams
The Ideal Gas Law equation looks like this:
PV = nRT
In this equation,
P = pressure (atm) V = volume (L) n = moles R = Ideal Gas Constant (0.0821 L*atm/mol*K)T = temperature (K)After converting Celsius to Kelvin, you can put the given values into the equation and simplify to find the pressure.
P = ? atm R = 0.0821 L*atm/mol*K
V = 4.3 L T = 27 °C + 273.15 = 300.15 K
n = 0.893 moles
PV = nRT
P (4.3 L) = (0.893 moles) (0.0821 L*atm/mol*K)( 300.15 K)
P (4.3 L) = 22.0021
P = 5.12 atm
Therefore, The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm
Learn more about Ideal gas here ;
https://brainly.com/question/8711877
#SPJ2
Unknown # 21
Flame Test Color: Lilac
Addition of HCl(aq)= NR (No Reaction)
Addition of HCl(aq) and BaCl2(aq)= White precipitate
Addition of HNO3(aq) and AgNO3(aq)= NR (No Reaction)
What is the unknown ionic compund molecular formula?
What are the characteristics of ionosphere?
Explanation:
The ionosphere is a shell of electron and electrically charged atoms and molecular that surrounds, the earth.
A place where animals are protected in their natural habitat is called ------------------
answer is wildlife sanctuary
Answer:
a wildlife sanctuary
Explanation:
PLZ HELP ME WITH MY WORK
What is a compound?
A substance that is made from two different metals
B. A substance that cannot be broken into simpler substances
C. A substance that is made using a chemical reaction
D. A substance that can be separated by physical means
Answer:
C.
Explanation:
Answer A is incorrect because a compound doesn't have to be made with only metals.
Answer B is incorrect because that is actually the definition of a pure element.
Answer C is correct because to make a compound, there has to be a chemical reaction where bonds are formed and an entirely new substance is created.
Answer D is incorrect because compounds cannot be separated by physical means.
Hope this helps :D
Question 6 of 10 What is the function of mitochondria? O
A. The mitochondria use sugars as fuel to produce energy.
B. The mitochondria direct the cell's activities and hold its DNA.
C. The mitochondria surround the cell and control which materials come into and out of the cell.
D. The mitochondria use sunlight to produce sugars. SUBE
Answer:
A. The mitochondria use sugars as fuel to produce energy.Explanation:
The most prominent function of mitochondria is to produce the energy currency of the cell, ATP (i.e., phosphorylation of ADP), through respiration and using sugar as fuel, and to regulate cellular metabolism .
Which statement describes the periodic law?
Help please now!
Answer:
Answer is: elements in the same group have similar chemical properties. Periodic law is the arrangement of the elements in order of increasing atomic number.
3. Determine the pH value for calcium hydroxide, Ca(OH), with concentration of
0.05 mol dm3. [pH + pOH = 14).
Explanation:
Ca(OH) is a base
pOH = -Log[OH]
[OH] = 0.05
pOH = -Log(0.05)
pOH = 1.3
pH + pOH = 14
pH = 14 - pOH
pH = 14 - 2
pH = 12.7
Which statement best describes what happens as thermal energy from the
sun warms the pavement?
A. The thermal energy absorbed by the pavement is destroyed.
B. The thermal energy that is not absorbed by the pavement is
destroyed.
C. Some thermal energy is absorbed by the pavement, and some is
destroyed.
D. The thermal energy of the sun is transferred to the pavement.
Answer:
D
Explanation:
The correct answer would be that the thermal energy of the sun is transferred to the pavement.
Thermal energy refers to the internal energy possessed by a system by virtue of the movement of molecules within such a system. In other words, it is the heat energy possessed by a system.
When the thermal energy from the sun warms the pavement, it means that the thermal energy from the sun has been successfully transferred to the pavement. Thermal energy can be transferred by conduction, convection, or by radiation depending on whether the system is a solid, liquid, gas respectively.
The correct option is, therefore, D.
How many moles are there in 2.3 x 1024 atoms of
sulfur?
Explanation:
The steps given in the question are incorrect.
Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).
Step 1
Use dimensional analysis to convert the number of atoms to moles.
1 mole atoms = 6.022 × 10²³ atoms
n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag
Step 2
Convert the moles of Ag to mass.
mass (m) = moles (n) × molar mass (M)
n(Ag) = 3.8193 mol Ag
M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag
m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures
The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.
Answer:
[tex]\boxed {\boxed {\sf 3.8 \ moles \ of \ sulfur}}[/tex]
Explanation:
We are asked to convert a number of atoms to moles.
We can convert atoms to moles using Avogadro's Number, which is 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this problem, the particles are atoms of sulfur. There are 6.022 ×10²³ atoms of sulfur in 1 mole of sulfur.
We use dimensional analysis to convert atoms to moles. This involves setting up ratios. Use Avogadro's Number and the underlined information to make a ratio.
[tex]\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
We are converting 2.3 ×10²⁴ atoms of sulfur to moles, so we multiply by this value.
[tex]2.3 \times 10^{24} \ atoms \ S *\frac {6.022 \times 10^{23} \ atoms \ S}{1 \ mol \ S}[/tex]
Flip the ratio. It is equivalent, but it allows the units of atoms of sulfur to cancel.
[tex]2.3 \times 10^{24} \ atoms \ S *\frac {1 \ mol \ S}{6.022 \times 10^{23} \ atoms \ S}[/tex]
[tex]2.3 \times 10^{24} *\frac {1 \ mol \ S}{6.022 \times 10^{23} }[/tex]
[tex]\frac {2.3 \times 10^{24} }{6.022 \times 10^{23} } \ mol \ S[/tex]
[tex]3.819329127 \ mol \ S[/tex]
The original measurement of atoms (2.3 ×10²⁴) has 2 significant figures, so our answer must have the same. For the number we calculated that is the tenths place. The 1 in the hundredths place to the right (3.819329127) tells us to leave the 8 in the tenths place (3.819329127).
[tex]3.8 \ mol \ S[/tex]
2.3 ×10²⁴ atoms of sulfur is equal to approximately 3.8 moles of sulfur.
How many Sodium (NA) Atoms are in Methylene?
Answer:
No Sodium(Na) in methylene
Explanation:
Methylene is an organic compound
What is the name of this molecule?
H3C - C ≡ C - CH3
Answer: 1,2,3, or 4-butyne?
Explanation:
The given molecule is
H3C - C ≡ C - CH3
The numbering order is shown below:
H3C - C ≡ C - CH3
1 2 3 4
So, the alkyne group is in the second position.
The carbon chain has four carbons.
Hence, the IUPAC name of the given compound is:
2-butyne.
I have no idea how to do this and need help
Answer:
60.55%
Explanation:
nO3=155/48
nO2 used: 3/2nO3=4.84375
percent yield: 4.84375/8=60.55%
How much heat is added if .0948g of water is increased in temperature by .728 degrees C?
.289 J
.803 J
1.46 J
.055 J
Answer:
0.289J of heat are added
Explanation:
We can relate the change in heat of a substance with its increasing in temperature using the equation:
q = m*ΔT*S
Where Q is change in heat
m is mass of substance (In this case, 0.0948g of water)
ΔT = 0.728°C
S is specific heat (For water, 4.184J/g°C)
Replacing:
q = 0.0948g*0.728°C*4.184J/g°C
q = 0.289J of heat are added
17. The name of the reaction that produces esters is
A. addition.
B. anionic initiated polymerization.
C. radical initiated polymerization.
D. dehydration
Answer:
the name of reaction that produces esters is dehydration.
value of MA is always lesser thàn 1 why?
Answer:
because the load arm is greater than the effort arm. As we know that when the load arm is greater than the effort arm, the mechanical advantage will always be lesser than one, which results in gain in speed
which one of the following is not a mixture?Air,mercury ,milk,cement
mercury is not a mixture it is a element
Answer:
mercury
Explanation:
What is the mass, in grams, of one mole of any substance known as?
ОА.
atomic mass
OB.
molar mass
O C.
molecular weight
OD.
atomic number
Answer:
I think it's answer would be A
The addition of solute particles into a solution causes:
A. the solvent particles to be attracted to the solute particles and to have less kinetic energy.
B. the solute particles to bump the solvent particles out of the solution, making it easier to boil.
C. the solute particles to form seed crystals and make the solution freeze more easily.
D. the solvent particles to be spread further out and have more to move, increasing their kinetic energy.
Answer:
D. the solvent particles to be spread further out and have more to move, increasing their kinetic energy.
Explanation:
The addition of solute particles results in an increased boiling point. As the solutes increases so does the energy inside as the solutes add and occupies more space near the surface of the liquid.Which element will form In ion whose lonic radius is larger than its atomic radius?
(1) K
(2) F
(3) LI
(4) Mg
Answer:
Letter b so F
Explanation:
I hope this help
Explanation:
All five ions have an equal number of electrons and therefore share the same electron configuration. For example, a neutral calcium atom (Z=20) has 20 electrons; it loses two of them to form a Ca2+ cation, which would thus contain 20−2=18 electrons. Similarly, a phosphorus atom (Z=15) gains three electrons to form a P3− anion that contains 15+3=18 electrons.
Positively-charged protons in the nuclei attract the negatively-charged electron cloud. Each proton carries a +1 charge; the more protons an atom or ion contains the stronger the attraction it poses on its electron cloud. A nucleus of strong positive charge pulls its electron cloud towards itself tightly such that the latter would have a small radius.
The periodic table is arranged in the order of increasing proton number. Phosphorus comes the first among the five species and contains the least number of protons. Its ion would be the largest among the five. Calcium comes the last and forms the smallest ion.
Number of protons per nucleus P<S<Cl<K<CaStrength of Electrostatic attraction on the electron cloud P<S<Cl<K<CaIonic radius P3−>S2−>Cl−>K+>Ca2+
25. Production is a. Transformation b. Reduction c Consumption d. Valuation
Answer:
a
Explanation:
I think a is the answer because when you produce something you transform it's raw materials to a finished good.
I hope this helps
what is the percentage composition of water in crystallization of oxalic acid
Answer:
5.17 percentage is water
Explanation:
answer from gauth math
