Answer:
Angle of incline is 20.2978°
Explanation:
Given that;
Gravitational acceleration on a planet a = 3.4 m/s²
Gravitational acceleration on Earth g = 9.8 m/s²
Angle of incline = ∅
Mass of the stone = m
Force on the stone along the incline will be;
F = mgSin∅
F = ma
The stone has the same acceleration as that of the gravitational acceleration on the planet.
so
ma = mgSin∅
a = gSin∅
Sin∅ = a / g
we substitute
Sin∅ = (3.4 m/s²) / (9.8 m/s²)
Sin∅ = 0.3469
∅ = Sin⁻¹( 0.3469 )
∅ = 20.2978°
Therefore, Angle of incline is 20.2978°
Suppose you had 10 identical molecules enclosed by a box. At a given instant, one molecule has an energy of 100 Joules, and the others are all stationary. (A) What is the average kinetic energy of the 10 molecules
Answer:
the average kinetic energy of the 10 molecules is 10 J.
Explanation:
Given;
energy on one molecule in motion, E = 100 J
number of molecules, n = 10
(A) The average kinetic energy of the 10 molecules
since the remaining 9 molecules are at rest, their kinetic energy = 0
[tex]E_{Avg} = \frac{E_1 + E_9}{10} \\\\E_{Avg} = \frac{100J+ 0}{10} \\\\E_{Avg} = \frac{100J}{10} \\\\E_{Avg} = 10J[/tex]
Therefore, the average kinetic energy of the 10 molecules is 10 J.
1. In calculating the work W necessary to stretch a spring from its natural length of 8 centimeters to a length of 12 centimeters, we need some more information about the spring. There are two distinct kinds of information, each of which separately would provide the necessary assistance so we could find W. Describe what the two additional kinds of information are.
Answer:
* displacement from equilibrium position
* The spring constant,
Explanation:
The work done by a spring is two times the expressions
W = ∫ F. dx
in a spring the force is given by hooke's law
F = - k Δx
we substitute
W = - k ∫ x dx cos θ
In the case of the spring, the displacement is in the same direction of work, therefore the angle is zero and the cosine is equal to 1
we integrate
W = ½ k Δx²
we can see that we need two parts to calculate the work
* displacement from equilibrium position
Δx = 12 -8 = 4 cm
* The spring constant, this constant can be found from the displacement measurements as a function of the applied force.
The electric potential inside a living cell is lower than the potential outside. Suppose the electric potential difference between the inner and the outer cell wall is 0.095 V, a typical value. To maintain the internal electrical balance, the cell pumps out sodium ions. How much work must be done to remove a single sodium ion (charge e)
Answer:
1.52 × 10⁻²⁰ J
Explanation:
The electrical potential difference is defined as the amount of work done in carrying a unit charge from one point to another point in an electric field. Electric potential difference is measured in volts. It is given by the formula:
ΔV = ΔU / q
ΔV is electric potential difference between the two points, ΔU is the work done and q is the unit charge.
Given that ΔV = 0.095 V, q = 1.6 × 10⁻¹⁹ C. Hence:
ΔU = ΔV.q
ΔU = 0.095 V * 1.6 × 10⁻¹⁹ C
ΔU = 1.52 × 10⁻²⁰ J
The electric potential difference is the amount of effort done in an electrical field to shift a unit charge from one spot to another.The electric potential difference will be 1.52×10⁻²⁰J.
What is the electric potential difference ?
The electrical potential difference is the amount of effort done in an electrical field to shift a unit charge from one spot to another.
Traditional current flows from positive to negative terminals, signifying positive charge transfer in that direction.
The given data in the problem is
[tex]\triangle V[/tex] is the electric potential difference between the inner and the outer cell wall = 0.095 V
[tex]\triangle U[/tex] is the amount of work done
q is the charge on the electron =1.6×10⁻¹⁹C
Electric potential difference is given by the formula
[tex]\triangle V=\frac{\triangle U}{q} \\\\ \triangle U=\triangle Vq\\\\\triangle U=0.095 V\times1.6\times10^{-19}\\\\ \triangle U=1.52\times10^{-20}J[/tex]
Hence the electric potential difference will be 1.52×10⁻²⁰J.
To learn more about the electric potential difference refer to the link;
https://brainly.com/question/9383604
Two identical conducting spheres, fixed in place, attract each other with an electrostatic force of 0.0988 N when their center-to-center separation is 44.5 cm. The spheres are then connected by a thin conducting wire. When the wire is removed, the spheres repel each other with an electrostatic force of 0.0276 N. Of the initial charges on the spheres, with a positive net charge, what was (a) the negative charge on one of them and (b) the positive charge on the other
Answer:
(a) The negative charge on one of the charges is -8.79630245 × 10⁻⁷C
(b) The positive charge on one of the other charges is 8.79630245 × 10⁻⁷C
Explanation:
The given parameters are;
The force of attraction between the two spheres = 0.0988 N
The distance between their centers = 44.5 cm = 0.445 m
Therefore, we have;
[tex]F = \dfrac{k \cdot q_1 \cdot q_2}{d^2}[/tex]
Therefore, we have;
[tex]0.0988 \ N = -\dfrac{8.99 \times 10^9 N\cdot m^2 \cdot C^{-2}\cdot q_1 \cdot q_2}{(0.445 \ m)^2}[/tex]
Therefore, we have;
q₁·q₂ = -0.0988 N × (0.445 m)²/(8.99 × 10⁹ N·m²·C⁻²) = -2.17629255 × 10⁻¹² C²
q₁·q₂ = -2.17629255 × 10⁻¹² C²...(1)
When the two charges are connected, we get;
[tex]F_2 = \dfrac{k \cdot \left (\dfrac{q_1 + q_2}{2} \right) ^2}{d^2}[/tex]
Therefore, we have;
[tex]q_1 + q_2 = \sqrt{\dfrac{4 \cdot F_2 \cdot d^2}{k} }[/tex]
[tex]q_1 + q_2 = \sqrt{\dfrac{4 \times 0.0276 \ N \times(0.445 \ m)^2}{8.99 \times 10^9 N\cdot m^2 \cdot C^{-2}} } = 1.59446902743 \times 10^{-6} \ C[/tex]
q₁ + q₂ = 1.59446902743 × 10⁻⁶ C...(2)
From, equation (2), we have;
q₁ = 1.59446902743 × 10⁻⁶ C - q₂
Plugging in the value of q₁ in equation (1) givens;
q₁·q₂ = -2.17629255 × 10⁻¹²
Therefore, we have;
(1.59446902743 × 10⁻⁶ - q₂) × q₂ = -2.17629255 × 10⁻¹²
Which gives;
-q₂² + 1.59446902743 × 10⁻⁶·q₂+2.17629255 × 10⁻¹² = 0
Solving, with a graphing calculator, we get;
q₂ = 2.4741×10⁻⁶ C, or -8.79630245 × 10⁻⁷C
q₁ = 8.79630245 × 10⁻⁷C or -2.4741×10⁻⁶ C
Therefore, we have;
(a) The negative charge on one of the charges = -8.79630245 × 10⁻⁷C
(b) The positive charge on one of the other charges = 8.79630245 × 10⁻⁷C
Why do birds not get shock when they
sit on high power live wire but we do?
Answer:
Their bodies don't conduct electricity like we do.
Explanation:
Answer:
birds dont get shocked because they sit on their talons and their talons are a different type of skin then the rest of their body
Explanation:
what is a Lever?
what is wedge
what is a inclined Plane/screw
what is a wheel and axle
what is a Pulley?
Answer:lever
Explanation:
An electric vehicle starts from rest and accelerates at a rate of 2.3 m/s2 in a straight line until it reaches a speed of 29 m/s. The vehicle then slows at a constant rate of 1.5 m/s2 until it stops. (a) How much time elapses from start to stop
Answer:
t = 12.6 seconds
Explanation:
Given that,
Initial velocity, u = 0
Acceleration of an electric vehicle, a = 2.3 m/s²
Final velocity, v = 29 m/s
We need to find the time elapses from start to stop. The acceleration of an object is given by the relation as follows :
[tex]a=\dfrac{v-u}{t}\\\\t=\dfrac{v-u}{a}\\\\t=\dfrac{29-0}{2.3}\\\\t=12.6\ s[/tex]
So, 12.6 seconds is elapsed from start to stop.
A ball is dropped from a building taking 3sec to fall to the ground. Calculate:
Speed when falling to the ground
The height of the building
Answer:
Vf = 29.4 m/s
h = 44.1 m
Explanation:
Data:
Initial Velocity (Vo) = 0 m/sGravity (g) = 9.8 m/s²Time (t) = 3 sFinal Velocity (Vf) = ?Height (h) = ?==================================================================
Final Velocity
Use formula:
Vf = g * tReplace:
Vf = 9.8 m/s² * 3sMultiply:
Vf = 29.4 m/s==================================================================
Height
Use formula:
[tex]\boxed{h=\frac{g*(t)^{2}}{2}}[/tex]Replace:
[tex]\boxed{h=\frac{9.8\frac{m}{s^{2}}*(3s)^{2}}{2}}[/tex]Multiply time squared:
[tex]\boxed{h=\frac{9.8\frac{m}{s^{2}}*9s^{2}}{2}}[/tex]Simplify the s², and multiply in the numerator:
[tex]\boxed{h=\frac{88.2m}{2}}[/tex]It divides:
[tex]\boxed{h=44.1\ m}[/tex]What is the velocity when falling to the ground?
The final velocity is 29.4 meters per seconds.
How high is the building?
The height of the building is 44.1 meters.
A spacecraft and a staellite are at diametrically opposite position in the same circular orbit of altitude 500 km above the earth. As it passes through point A, the spacecraft fires its engine for a short interval of time to increase its speed and enter an elliptical orbit. Knowing that the spacecraft returns to A at the same time the satellite reaches A after completing one and a half orbits, determine (a) the increase in speed required, (b) the periodic time for the elliptic orbit
Answer:
Hello the diagram related to your question is attached below
answer: a) 851 m/s
b) 8506.1 secs
Explanation:
calculate the periodic time of the satellite using the equation below
t = [tex]\frac{2\pi }{R} \sqrt{\frac{(R+h)^{3} }{g} }[/tex] -- ( 1 )
where ; R = 6370 km
h = 500 km
g = 9.81 m/s^2
input given values into equation 1
t = 5670.75 secs
next calculate the periodic time taken by the space craft
a) determine the increase in speed
V = v - [tex]\sqrt{\frac{gR^2}{R + h} }[/tex]
where ; v = 8463 m/s , R = 6370 km, h = 500 km
V = 851 m/s
b) Determine the periodic time for the elliptic orbit
τ = [tex]\frac{3t}{2}[/tex]
= [tex]\frac{3*5670.76}{2}[/tex] = 8506.1 secs
attached below is the remaining part of the detailed solution
1. li took 2 } seconds for a car's vclocity to change from 20 m/s to 15 m/s. The mass of the car was 1370 kg. What force was required to cause the acceleration? (Hint: First calculate the acceleration.
Answer:
Do you still need help??
Explanation:
The design of interior spaces is relatively unimportant to good
architecture?
A body is dropped from the roof of a 20 m high building by how much:
Does it take to reach the ground? How fast does it hit the ground?
Answer:
t = 2.01 s
Vf = 19.7 m/s
Explanation:
It's know through the International System that the earth's gravity is 9.8 m/s², then we have;
Data:
Height (h) = 20 mGravity (g) = 9.8 m/s²Time (t) = ?Final Velocity (Vf) = ?==================================================================
Time
Use formula:
[tex]\boxed{t=\sqrt{\frac{2*h}{g}}}[/tex]Replace:
[tex]\boxed{t=\sqrt{\frac{2*20m}{9.8\frac{m}{s^{2}}}}}[/tex]Everything inside the root is solved first. So, we solve the multiplication of the numerator:
[tex]\boxed{t=\sqrt{\frac{40m}{9.8\frac{m}{s^{2}}}}}[/tex]It divides:
[tex]\boxed{t=\sqrt{4.08s}}[/tex]The square root is performed:
[tex]\boxed{t=2.01s}[/tex]==================================================================
Final Velocity
use formula:
Vf = g * tReplace:
Vf = 9.8 m/s² * 2.01 sMultiply:
Vf = 19.7 m/s==================================================================
How long does it take to reach the ground?
Takes time to reach the ground in 2.01 seconds.
How fast does it hit the ground?
Hits the ground with a speed of 19.7 meters per seconds.
Which is the weakest of the four fundamental forces?
strong nuclear
weak nuclear
electromagnetic
gravitational
Answer:
Gravitational
Explanation:
gravitational
Answer:
Gravitational
Explanation:
In order from strongest to weakest.
Strong nuclear
Electromagnetic
Weak nuclear
Gravitational
you describe a friend’s position by including distance, direction, and what other term?
Answer choices:
A. Acceleration
B.displacement
C.Average speed
D. Reference point
PLEASE HELP I NEED THIS IN AN HOUR
Answer:
Acceleration
Explanation:
Answer: Acceleration
Explanation:
Starting from the front door of your ranch house, you walk 55.0 mm due east to your windmill, turn around, and then slowly walk 40.0 mm west to a bench, where you sit and watch the sunrise. It takes you 25.0 ss to walk from your house to the windmill and then 37.0 ss to walk from the windmill to the bench.
Required:
a. For the entire trip from your front door to the bench, what is your average velocity?
b. For the entire trip from your front door to the bench, what is your average speed?
Answer:
a) V = 0.24 m/s
b) v = 1.53 m/s
Explanation:
In this case, we are asked to find two values that are pretty similar and use the same units, however, there are differences between them.
The average velocity is often referred to a vector quantity, therefore, if time is a scalar magnitude, we need to find the vector quantity of distance. In this case, is the displacement, which is also referred as a vector.
So, to calculate the average velocity we need to determine first the displacement of the person. As the person heads east and then west, his total displacement (D) is:
D = 55 - 40 = 15 m
Now the total time would be the time taken to go to the windmill and then, to a bench:
t = 25 + 37 = 62 s
Finally, the average speed is:
V = D/t
V = 15 / 62
V = 0.24 m/sThe average speed is a scalar magnitude, so we use the covered distance by the person (d) and the total time:
d = 40 + 55 = 95 m
Then, the speed:
v = 95/62
v = 1.53 m/sHope this helps
Can someone please help me with this worksheet. It’s due today and I have no idea what to do.
Which elements have one valence electron?
A. Sodium
B. Carbon
C. Fluorine
D. Magnesium
The answer is A
Answer:
Well, you said the answer is A, so it’s A!
A π meson of rest energy 139.6 MeV moving at a speed of 0.921c collides with and sticks to a proton of rest energy 938.3 MeV that is at rest. (a) Find the total relativistic energy of the resulting composite particle. (b) Find the total linear momentum of the composite particle. (c) Using the results of (a) and (b), find the rest energy of the composite particle.
Answer:
A) 1268 MeV
B) 299MeV/c
C) 1268 MeV
Explanation:
Given :
π meson rest energy = 139.6 MeV
Speed = 0.921c
proton at rest energy = 938.3 MeV
a) Find the total relativistic energy of resulting composite particle
E = E(meson) + E(proton)
= [tex]\frac{(mc^2)_{meson} }{\sqrt{1-\frac{v^2}{c^2} } } + (mc^2)_{proton}[/tex]
= [tex]\frac{139.6MeV}{\sqrt{1-\frac{(0.906c)^2}{c^2} } } + 938.3[/tex]
E = 1268 MeV
B) determine the total linear momentum of the composite particle
= 299MeV/c
attached below is the detailed solution
C) Determine the rest energy of the composite particle
E = 1268 MeV
help? its a short question
Answer:
i think its ancestor
Explanation:
sry if im wrong
Answer:
scientists compare organisms DNA to support the theory that all species share a common Ancestor.
Peter, a 100 kg basketball player, lands on his feet after completing a slam dunk and then immediately jumps up again to celebrate his basket. When his feet first touch the floor after the dunk, his velocity is 5 m/s downward; when his feet leave the floor 0.50 s later, as he jumps back up, his velocity is 4 m/s upward. a. What is the impulse exerted on Peter during this 0.50 s
Answer:
Explanation:
Impulse = change in momentum
Initial momentum = mass x initial velocity = 100 x 5 = 500 kg m/s
final momentum = mass x final velocity = 100 x - 4 = -400 ( - ve sign due to reversal of direction )
change in momentum = final momentum - initial momentum
= - 400 - 500 = - 900 kg m/s .
As it is - ve , it acts upwards .
So magnitude of impulse on Perter = 900 kg m/s
Postural deviations can result in
Answer:
Postural deviations can cause poor balance, muscle pain and skeletal stress.
Explanation:
The mass percent of hydrogen in CH₄O is 12.5%.
What is the mass percent?Mass percent is the mass of the element divided by the mass of the compound or solute.
Step 1: Calculate the mass of the compound.
mCH₄O = 1 mC + 4 mH + 1 mO = 1 (12.01 amu) + 4 (1.00 amu) + 1 (16.00 amu) = 32.01 amu
Step 2: Calculate the mass of hydrogen in the compound.
mH in mCH₄O = 4 mH = 4 (1.00 amu) = 4.00 amu
Step 3: Calculate the mass percent of hydrogen in the compound.
%H = (mH in mCH₄O / mCH₄O) × 100%
%H = 4.00 amu / 32.01 amu × 100% = 12.5%
The mass percent of hydrogen in CH₄O is 12.5%.
CO2 = 1.580 grams H2O = 0.592 grams Lookup the molar mass of each element in the compound Carbon = 12.0107 Hydrogen = 1.00794 Oxygen = 15.999 Calculate the molar mass of CH4O by adding the total masses of each element used. 12.0107 + 4 * 1.00794 + 15.999 = 32.04146 Now calculate how many moles of CH4O you have by dividing by the molar mass. m = 1.15 g / 32.04146 g/mole = 0.035891 mole Now figure out how many moles of carbon and hydrogen you have. Carbon = 0.035891 moles Hydrogen = 0.035891 moles *
Therefore, The mass percent of hydrogen in CH₄O is 12.5%.
Learn more about mass percent here:
https://brainly.com/question/5295222
#SPJ6
A 200-N force acts on a 10-kg object. The acceleration of the object is
A wheelbarrow is pushed 10 meters with a force of 75 N for 30 seconds. What is the work done?
How much power is needed?
The force of friction occurs primarily because:
A) two surfaces in contact have magnetic forces of attraction.
B) on the microscopic level, two surfaces in contact are rough even if they appear smooth to the touch.
C) two surfaces in contact have a gravitational attraction to one another.
D) both A and B.
Answer:
B
Explanation:
Friction is a force that opposes motion between any surfaces that are touching. Friction occurs because no surface is perfectly smooth Friction produces heat because it causes the molecules on rubbing surfaces to move faster and have more energy.
Rank the four fundamental forces from strongest to weakest. Use 1 to indicate the strongest force and 4 to indicate the weakest force. The gravitational force: The electromagnetic force: The strong nuclear force: The weak nuclear force:
Answer:
4
2
1
3
Explanation:
Be safe, lovelies <3
NEED HELP WITH THIS PLEASE
Answer:
A
Explanation:
I love buying physics toys. I recently broke out my new electromagnetic field meter and started playing with it. After turning it on, I noticed the device kept showing an electric field value of 200 N/C towards the ground, without being near anything obvious (e.g., an electronic device) that would be producing the electric field. I even took a long walk to check if the reading was somehow localized to my house, but I got the same result. How might you explain the reading (assuming the device is working properly)
Answer:
ionized particles from the sun.
* interactions in radiation belts.
* the friction of the planet in the solar wind
q = +9 10⁵ C
Explanation:
Due to being made up of matter, the planet Earth has a series of positive and negative charges, in general these charges should be balanced and the net charge of the planet should be zero, but there are several phenomena that introduce unbalanced charges, for example:
* ionized particles from the sun.
* interactions in radiation belts.
* the friction of the planet in the solar wind
This creates that the planet has a net electrical load
We can roughly calculate the charge of the planet
E = k q / r²
q = E r² / k
let's calculate
q = 200 (6.37 10⁶)²/9 10⁹
q = +9 10⁵ C
what are the precautions to be taken while performing a rectangular glass prism experiment
Answer:
PRECAUTIONS
-The refracting faces of the glass prism should be smooth, transparent and without any air bubble or broken edge. ...
-Use a sharp pencil to draw boundary of the prism and rays of light.
-The alpins should have sharp tip and should be fixed exactly vertical to the plane of the paper.
Explanation:
Please give thanks to all my answers and please mark as brilliant and please follow me
Micro-bats use a form of radar called echolocation to navigate and find their prey such as flying insects. They locate the surrounding objects by bouncing sound wave pulses off these objects and detecting the time delay between the emitted pulses and the reflected pulses. Determine the time delay between the pulse emitted by the micro-bat and the detected pulse reflected from an insect located 10 m away from the micro-bat. Assume the approximate speed of sound waves to be 340 m-s-1
Answer:
t = 5.88 10⁻² s
Explanation:
The speed of the sound wave after it is emitted by the bat is constant, so we can use the uniform motion relationships
v = [tex]\frac{x}{t}[/tex]
t = [tex]\frac{x}{v}[/tex]
in this case the distance is that of the sound in going from the bat to the insect and back
x = 2d
x = 2 10
x = 20 m
let's calculate
t = 20/340
t = 5.88 10⁻² s
We can see that the time is very short, so the distance traveled by the two animals has little influence on the result.
a. Use the graph and the element made in question 2 to determine the mass of the star.