This question is incomplete, the complete question;
you make an interferometer using 50-50 beam splitter and two mirrors, one being a perfect mirror and one which does not reflect all light. The wavelength of the 9 mW incident laser is 400 nm.
Because the top mirror is not perfectly reflective (it reflects 90% of the photons, allowing 10% of them to go through), the power measured at the detector when only the vertical arm is blocked is 2.25 mW, while the power measured at the detector when only the horizontal arm is blocked is only 2.025 mW. Assume initially the intensity is at its maximum. How much would we need to translate the perfect mirror to the right to get a minimum intensity at detector, and what is that minimum intensity
Options;
a) 200 nm; 0.9 mW
b) 100 nm, 0.0059 mW
c) 200 nm; 0 mW
d) 100 nm; 0.9 mW
e) 200 nm; 0.0059 mW
Answer:
the amount we need to translate the perfect mirror to the right to get a minimum intensity at detector and the minimum intensity are;
100 nm; 0.0059 mW
Option b) 100 nm, 0.0059 mW is the correct answer
Explanation:
Given that the instrument here is an interferometer.
Maximum intensity is obtained when the two waves are exactly in phase.
that is the peaks (crusts and troughs) and nodes (zero value points) of the two waves will be at the exact same point when the wave falls on the detector.
The phase factor of this point is taken as ∅ = 0
Now, to get a minimum point, the phase difference between the two waves should be should be ∅ = π
This corresponds to a path difference between the two waves as half of the wavelength. λ/2
The light gets reflected from the mirror.
Hence, when we move the mirror by a length l, the extra/less path the light has to travel is 2l (light is going and coming back)
hence, to get a path difference of λ/2 the mirror should move half of this distance only
so, the mirror should move;
[tex]l[/tex] = λ/4
here, wavelength is 400nm
the length moved by the mirror = 400/4 = 100 nm
The intensity is given by the equation;
[tex]l[/tex] = [tex]l[/tex]1 + [tex]l[/tex]2 + 2√[tex]l[/tex]1[tex]l[/tex]2cos(∅)
where
[tex]l[/tex]1 = 2.25 mW
[tex]l[/tex]2 = 2.025 mW
∅ = π
so we substitute
[tex]l[/tex] = 2.25 + 2.025 - 2√(2.25 × 2.025)
[tex]l[/tex] = 4.275 - 4.26907
[tex]l[/tex] = 0.0059
Therefore; the amount we need to translate the perfect mirror to the right to get a minimum intensity at detector and the minimum intensity are;
100 nm; 0.0059 mW
Option b) 100 nm, 0.0059 mW is the correct answer
Surface Features on earth combine to form the(blank) or area ,Will mark brainliest if someone give’s me the word that fit’s in there.
What is the symbol for carbonate ?
A lunar eclipse occurs when the Moon passes through Earth's
A spacecraft is flying away from the moon toward earth.
What will be true of the moon’s gravitational pull on the spacecraft?
It will decrease.
It will increase.
It will repel the spacecraft.
It will remain the same.
Answer:
it will decrease
Explanation:
According to the law of universal gravitation, the gravitational force exerted by the moon on the spacecraft is equal to the product of their masses and inversely proportional to the square of the distance that separates them. Therefore, as the spacecraft moves away, its distance increases and the force of attraction exerted by the moon decreases.
Answer:
A. It will increase
Explanation:
I took the quiz on K12 and this was the correct option.
Hope I helped
Thomas knows that many machines transform electrical energy into other forms of energy
Answer:
Only the car transforms electrical energy into more than one form of energy.
Explanation:
The motion of the car is mechanical energy but it can also transform into another energy witch is electrical energy
A motorcycle reaches the speed of 40 m / s, how far does it travel in 10 seconds?
Answer:
d = 200 m
Explanation:
Data:
Initial Velocity (Vo) = 0 m/s Final Velocity (Vf) = 40 m/s Time (t) = 10 s Distance (d) = ?Use formula:
[tex]\boxed{d=\frac{Vf+Vo}{2}*t}[/tex]Replace:
[tex]\boxed{d=\frac{40\frac{m}{s}+0\frac{m}{s}}{2}*10s}[/tex]Sum in the numerator:
[tex]\boxed{d=\frac{40\frac{m}{s}}{2}*10s}[/tex]It divides:
[tex]\boxed{d=20\frac{m}{s}*10s}[/tex]Simplify the seconds (s), and multiply:
[tex]\boxed{d=200\ m}[/tex]How far does it go?
Travel a distance of 200 meters.
Determine one way you can contribute to water in the atmosphere in your day-to-day activities pleaseeeee helppp
Answer:
agricultural production of food
Explanation:
A fan is set on a desk next to a stack of paper. The fan is turned on and then turned
on HIGH SPEED. Which of the following would best apply Newton's First Law to this
example.
The papers accelerated due to the force of the fan.
The papers are acted upon by an unbalanced force from the fan.
O The papers exerted an equal force on the air blown by the fan.
O The papers that were the heaviest were blown the closest.
Answer:
The second option - the papers are acted upon by an unbalanced force from the fan.
Explanation:
Henrietta is going off to her physics class, jogging down the sidewalk at a speed of 4.15 m/sm/s. Her husband Bruce suddenly realizes that she left in such a hurry that she forgot her lunch of bagels, so he runs to the window of their apartment, which is a height 55.2 mm above the street level and directly above the sidewalk, to throw them to her. Bruce throws them horizontally at a time 5.50 ss after Henrietta has passed below the window, and she catches them on the run. You can ignore air resistance.
(a) With what initial speed must Bruce throw the bagels so that Henrietta can catch the bag just before it hits the ground?
(b) Where is Henrietta when she catches the bagels?
Answer:
Explanation:
Distance travelled by Henrietta in 5.5 s = 4.15 x 5.5 = 22.825 m .
Time taken by lunch of bagels to fall vertically by 55.2 m . Let it be t .
s = ut + 1/2 g t²
55.2 = 0 + .5 x 9.8 x t²
t² = 11.26
t = 3.356 s
By the time the lunch of bagels touches the hand of Henrietta , she would have travelled further by distance
s = 3.356 x 4.15 = 13.9 m
She is now at distance of 22.825 + 13.9 = 36.725 m from window .
So lunch of bagels must travel a horizontal distance of 36.725 m in 3.356 s which the time of fall of bagel .
Speed of bagel = distance / time
= 36.725 / 3.356
= 10.94 m /s
b )
Henrietta is 36.725 m from window at the time when she catches the bangel.
Which of these is an effect of gravity?
А
A cup placed on a table won't float away.
B
You can throw a ball or a rock up.
С
The brakes on a bike can make it stop.
D
Liquid water can become a gas.
Answer:
(A)
A cup placed on a table won't float away
A 4 m long metal bar tapped by a hammer on one end. A microphone recording the sound at the other end picks up two sound pulses; one which traveled through the metal bar and other which was traveling through room temperature air. These two pulses are separated by 11 msec. What is the speed of sound in the metal
Answer:
Explanation:
Speed of sound in air at room temperature = 346 m /s
Let speed of sound in metal given = v m /s
Time take by sound wave travelling through air = 4 / 346 = .01156 s
Time taken by sound wave travelling through metal = 4 / v s
Given ,
.01156 - 4 / v = 11 x 10⁻³ s = .011 s ( time taken by sound travelling in air is more )
4 /v = .01156 - .011 = .00056
v = 4 / .00056 = 7142.85 m /s
Iron has a specific heat of o.45 J/g °C. Removing -1.16 E 2 J of energy lowered the temperature of iron from 89 °C to 26.41 °C. What was the mass of the iron?
Answer:
m = 4.11 grams
Explanation:
Given that,
The specific heat of Iron, c = 0.45 J/g°C
Heat removed, [tex]Q=1.16\times 10^2\ J[/tex]
Initial temperature, [tex]T_i=89^{\circ} C[/tex]
Final temperature, [tex]T_f=26.41^{\circ} C[/tex]
We need to find the mass of the iron. We know that the heat removed in terms of specific heat is given by :
[tex]Q=mc\Delta T\\\\m=\dfrac{Q}{c\Delta T}\\\\m=\dfrac{-1.16\times 10^2}{0.45\times (26.41-89)}\\\\m=4.11\ g[/tex]
So, the mass of the iron is 4.11 grams.
A car accelerates from zero to a speed of 110
km/hr in 15 seconds. What is the car's rate of
acceleration?
The car's rate of acceleration : a = 2.04 m/s²
Further explanationGiven
speed = 110 km/hr
time = 15 s
Required
The acceleration
Solution
110 km/hr⇒30.56 m/s
Acceleration is the change in velocity over time
a = Δv : Δt
Input the value :
a = 30.56 m/s : 15 s
a = 2.04 m/s²
In the 1986 Olympic Games, Abdon Pamich of Italy won the 50 km walk, in
4h, 11 min and 11.2 s. Find his average speed in m/s.
Answer: 4
Explanation: because my pet monkey said it was
Identify the independent variable(s) in Asch's original experiment.
Answer:
How do I answer this I don't understand the question
Explanation:
A wall clock has a minute hand with a length of 0.46 m and an hour hand with a length of 0.24 m. Take the center of the clock as the origin, and use a Cartesian coordinate system with the positive x axis pointing to 3 o'clock and the positive y axis pointing to 12 o'clock. Write the vector that describes the displacement of a fly if it quickly goes from the tip of the minute hand to the tip of the hour hand at 3:00 P.M. (Let vector D represents the displacement of the fly.)
Answer:
the vector that describes the displacement of a fly if it quickly goes from the tip of the minute hand to the tip of the hour hand at 3:00 P.M is ; { 0.24 m(i) - 0.46 m(j) }
Explanation:
Given the data in the question;
as illustrated in the image below,
3:00 pm means
the hour hand is on 3 i.e along x-axis
while the minute hand is on 12 i.e along y-axis
so Displacement will be;
D = ( 0.24 + 0i) - ( 0 + 0.46j )
D = { 0.24 m(i) - 0.46 m(j) }
Therefore, the vector that describes the displacement of a fly if it quickly goes from the tip of the minute hand to the tip of the hour hand at 3:00 P.M is ; { 0.24 m(i) - 0.46 m(j) }
On a level test track, a car with antilock brakes and 90% braking efficiency is determined to have a theoretical stopping distance (ignoring aerodynamic resistance) of 408 ft (after the brakes are applied) from 100 mi/h. The car is rear-wheel drive with a 110-inch wheelbase, weighs 3200 lb, and has a 50/50 weight distribution (front and back), a center of gravity that is 22 inches above the road surface, an engine that generates 300 ft-lb of torque, and overall gear reduction of 8.5 to 1 (in first gear), a wheel radius of 15 inches and a driveline efficiency of 95%. What is the maximum acceleration from the rest of this car on this test track
Answer:
a = 30.832 ft/s²
Explanation:
To solve this problem let's start by finding the braking acceleration using kinematics, where the distance is x = 408 ft, the initial velocity vo = 100 mi / h and the final velocity is zero v = 0
v² = v₀² - 2 a x
0 = v₀² - 2ax
a = [tex]\frac{v_o^2}{2x}[/tex]
Let's start by reducing the magnitudes to ft / s
v₀ = 100 mi / h (5280 foot / 1 mile) (1h / 3600 s) = 146.666 ft / s
let's calculate
a = [tex]\frac{146.66^2}{2 \ 408}[/tex]
a = 26.36 ft / s²
Let's call this acceleration a_effective, this acceleration is in the opposite direction to the speed of the vehicle.
Let's use a rule of three (direct proportions) to find the acceleration applied by the brake system (a1) which has an efficiency of 95%. or 0.95
a₁ = [tex]\frac{a_e}{0.95}[/tex]
Let's use another direct proportion rule If the acceleration of the brake system (a₁) for an applied acceleration (a) with an efficiency of 0.90
a = [tex]\frac{a_1}{0.90}[/tex]
we substitute
a = [tex]\frac{a_e}{0.95 \ 0.90}[/tex]
let's calculate
a = [tex]\frac{26.36}{ 0.95 \ 0.90}[/tex]
a = 30.832 ft/s²
This is the maximum relationship that the vehicle can have for when it brakes to stop at the given distance
Pls help!!
1 example of a conductor and 1 example of a insulator in your EVERYDAY world.
Answer:
here
Explanation:
Examples of insulators include plastics, Styrofoam, paper, rubber, glass and dry air.
Examples of conductors include metals, aqueous solutions of salts
How do projectors project the color black?
Answer:
Projectors do not project the color black. This makes sense since black is really the absence of light, and you can't project something that does not exist. When a projector sends a beam of light on to a wall or a projector screen so that an image is formed on the wall or screen, the parts of the image that look black are really a very dim white color (which we sometimes call gray). - wtamu
Answer is:
Projectors do not project the color black.
A car initially traveling at 15 m/s speeds up at a constant rate of 2.0 m/s2 for 3 seconds. The velocity of the car at the end of the 3 second interval is _________ m/s.
Answer:
Vf = 21 m/s
Explanation:
Data:
Initial Velocity (Vo) = 15 m/sAcceleration (a) = 2.0 m/s²Time (t) = 3 sFinal Velocity (Vf) = ?Use formula:
Vf = Vo + a * tReplace:
Vf = 15 m/s + 2.0 m/s² * 3sMultiply the acceleration with time:
Vf = 15 m/s + 6 m/sSolve the sum:
Vf = 21 m/sThe velocity of the car at the end of the 3 second interval is 21 meters per second.
50 points Two waves combine with constructive interference. What must be true of the
combined wave that forms?
A. It has a lower frequency than that of the original waves.
B. It has a higher amplitude than that of the original waves.
C. It has a higher frequency than that of the original waves.
D. It has a lower amplitude than that of the original waves.
Answer:
it has a higher amplitude than that of the original waves
Explanation:
trust me its right
The two waves combined with constructive interference have a higher amplitude than the original wave.
Which wave has the highest amplitude?High energy waves are characterized by high amplitude. Low energy waves are characterized by their small amplitude. As explained in Lesson 2, wave amplitude is the maximum amount of particle movement on a medium from a resting position.
What are superposition and interference?Superposition is a combination of two waves in the same place. Constructive interference occurs when two identical waves interfere in phase. Destructive interference occurs when two identical waves are exactly out of phase and overlap.
Learn more about higher amplitude waves at
https://brainly.com/question/19036728
#SPJ2
If a 500-pound object is moved 200 feet how much work is being done?
a. 200 FT LB
b. 500 FT LB
c. 1000 FT LB
d. 100,000 FT LB
Answer:
D
Explanation:
Work = Distance x Mass
work done = 100,000 FT LB
What is work done ?
Work is done whenever a force moves something over a distance or The work done by a force is defined to be the product of component of the force in the direction of the displacement and the magnitude of this displacement.
Work done = force * displacement
given :
force = 500 pound
displacement = 200 feet
work done = 500 * 200 = 100,000 FT LB
correct option is d. 100,000 FT LB
learn more about work done
https://brainly.com/question/13662169?referrer=searchResults
#SPJ2
What is the momentum of a 0.000015 kg mosquito flying straight at you with a velocity of 5.20 m/s?
Answer:
Momentum, [tex]p=7.8\times 10^{-5}\ N-m[/tex]
Explanation:
Given that,
Mass of a mosquito, m = 0.000015 kg
Velocity of the mosquito, v = 5.2 m/s
We need to find the momentum of the mosquito. The momentum of an object is given by :
p = mv
Put all the values in the above formula.
[tex]p=0.000015\ kg\times 5.2\ m/s\\\\p=0.000078\ N-m\\\\\text{or}\\\\p=7.8\times 10^{-5}\ N-m[/tex]
So, the momentum of the mosquito is [tex]7.8\times 10^{-5}\ N-m[/tex].
A plane wishes to fly due north to an airport which is 205 km away. The plane can fly at a speed in still air of 220 km/h. A wind of 43 km/h blows from east to west.
a. In which direction,relative to north, should the plane head to reach it’s destination?
b. How long does this take?
Answer:
nique ta mama
Explanation:
A wave in which the movement of the wave is perpendicular to the movement of the wave traveling through the medium-compression wave (longitudinal wave)
True or false?
Answer:
I'm rusty sorry if I'm wrong but true?
During a storm, a car traveling on a level horizontal road comes upon a bridge that has washed out. The driver must get to the other side, so he decides to try leaping the river with his car. The side of the road the car is on is18.0 m above the river, while the opposite side is only1.8 m above the river. The river itself is a raging torrent69.0 m wide.Part AHow fast should the car be traveling at the time it leaves the road in order just to clear the river and land safely on the opposite side?Part BWhat is the speed of the car just before it lands on the other side?
Answer:
Part A: The speed the car should be travelling when leaping the river is approximately 37.948 m/s
Part B: The speed of the car just before it lands is approximately 41.92345 m/s
Explanation:
The parameters of the car attempting leaping the river are;
The height of the car over the river = 18 m
The height of the opposite side of the bridge above the river = 1.8 m
The width of the river, x = 69.0 m
Part A
The time, 't' it would take the car to fall from 18 m above the river to 1.8 m above the river is given as follows;
t = √(2·h/g)
Where;
h = The height of the fall = 18 m - 1.8 m = 16.2 m
g = The acceleration due to gravity = 9.8 m/s²
∴ t = √(2×16.2 m/(9.8 m/s²)) = (9/7)·√2 s
The horizontal speed, 'vₓ', with which the car should be travelling at the time it leaves the road in order just to clear the river and land safely on the opposite side is given as follows;
vₓ = x/t = 69.0 m/((9/7)·√2 s) = (161/6)·√2 m/s ≈ 37.948 m/s
The horizontal speed the car should be travelling when leaping the river, vₓ ≈ 37.948 m/s
Part B;
The vertical velocity of the car is given as follows;
[tex]v_y[/tex]² = [tex]u_y[/tex]² + 2·g·h
∴ [tex]v_y[/tex]² =2·g·h = 2 × 9.8 m/s² × 16.200 m = 317.52m²/s²
[tex]v_y[/tex] = √(317.52 m²/s²) = (63/5)·√2 ≈ 17.819 m/s
The magnitude of the speed of the car, 'v', just before it lands is given using Pythagoras' theorem for resultant vectors as follows;
v = √([tex]v_y[/tex]² + vₓ²) = √(317.52 m²/s² +((161/6)·√2 m/s)²) ≈ 41.92345 m/s
The speed of the car just before it lands, v ≈ 41.92345 m/s.
You are inside the Great Hall, 15 m from the north wall with the doors to the RMC, and centered between two open doors that are 3 m apart. Someone is blairing a 200 Hz tone outside the Great Hall so that it enters the doors as a plane wave. You hear a maximum intensity in your current position. As you walk along the direction of the wall with the doors (but maintain a distance 15 m from the wall), how far will you walk (in m) to hear a minimum in the sound intensity
Answer:
Δr = 0.425 m
Explanation:
This is a sound interference exercise, the expression for destructive interference is
Δr = (2n + 1) λ / 2
in this case the movement is in the same direction as the sound, therefore the movement is one-dimensional
let's use the relationship between the speed of sound and its frequency and wavelength
v = λ f
λ = v / f
the first minium occurs for n = 0
Δr = λ / 2
Δr = v / 2f
Δr = [tex]\frac{340}{2 \ 400}[/tex]
Δr = 0.425 m
this is the distance from the current position that we assume in the center of the room
6th grade science I mark as brainliest !
Answer:
first is Atoms
4) is True
Identify and sketch all the external forces acting on the chair. Because the chair can be represented as a point particle of mass m, draw the forces with their tails centered on the black dot in the middle of the chair. Be certain to draw your forces so that they have the correct orientation. Draw the vectors starting at the black dot. The location and orientation of the vectors will be graded. The length of the vectors will not be graded.
Answer:
y axis normal (N) and the weight (W)
x axis pplied force (F) and friction force (fr)
Explanation:
If we have a chair on a horizontal surface, the normal (N) and the weight (W) of the body act on the vertical axis.
On the x axis, the applied force (F) acts in the direction of movement and the friction force (fr) in the opposite direction of movement.
In this exercise we assume that the body tends to move to the right, all the forces can be seen in the adjoint
The kinetic theory states that the higher the temperature, the faster the
Answer: the higher the kinetic energy
Explanation:
