An ordinary gasoline can measuring 30.0 cm by 20.0 cm by 15.0 cm is evacuated with a vacuum pump.
1a. Assuming that virtually all of the air can be removed from inside the can, and that atmospheric pressure is 14.7 psi, what is the total force (in pounds) on the surface of the can?
1b. Do you think that the can could withstand the force?

Answer:

Large molecules tend to have greater boiling points because the London dispersion forces are stronger within.

Explanation:

The volume of the sodium hydroxide solution needed for the reaction is 0.3 L

We'll begin by writing the balanced equation for the reaction.

H₂X + 2NaOH → 2H₂O + Na₂X

From the balanced equation above, the following data were obtained:

From the question given above, the following data were obtained:

MaVa / MbVb = nA / nB

(0.1 × 0.3) / (0.2 × Vb) = 1/2

0.03 / (0.2 × Vb) = 1/2

Cross multiply

0.03 × 2 = 0.2 × Vb

0.06 = 0.2 × Vb

Divide both side by 0.2

Vb = 0.06 / 0.2

Therefore, the volume of NaOH needed for the reaction is 0.3 L

Learn more on titration: https://brainly.com/question/23298305

mol = 3.19 × 10^23/6.02^23

= 0.529 mol

mass = 0.529 × 52

= 27.508 g

g to decigram

= 27.508 × 10

= 275.08 decigram

Answer:

6.42 °C

Explanation:

Q = mcΔT

Q = energy gain/release (J)

m = mass (kg)

c = specific heat capacity (J/°C/kg)

ΔT = change in temperature (°C)

Qs = n(ΔH°c)

Qs = energy gained/released from substance (kJ)

n = moles (mol)

ΔH°c = molar heat of combustion (kJ/mol)

m = 8.60

n = 0.285

ΔH°c = -810.4

c (of water) = 4184

Qs = 0.285(-810.4)

Qs = -230.964 (or -230964 J)

Q = 230964

230964 = (8.60)(4184)ΔT

230964 = 35982.4(ΔT)

ΔT = 6.4188... °C → 6.42 °C

Answer:

30

Explanation:

CO2 means that there is 1 carbon and 2 oxygens  in each CO2 molecule.

If there are 10 atoms of Carbon that requires 20 atoms of oxygen.

The number of atoms present is 10 + 20 = 30 atoms of any kind present. You just need to add.

Answer:

According to conservation of matter, there should be equal amounts of all elements on both the reactant and product side.

Reactant:

1 Ca

1 C

1 O

Product:

1 Ca

1 C

3 O

Therefore, your friend is right because the law of conservation of matter is not followed in this chemical equation.

Explanation:

Answer: law of inertia

Explanation:

Answer:

The Law of Inertia

Explanation:

Another name for Newton's first law is The Law of Intertia, which states that "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force" (“Newton’s laws of motion | Definition, Examples, & History | Britannica, n.d.).

Empirical is the simplest whole number ratio of elements in a compound. Molecular formula is n times the empirical formula, where n is integers 1,2,... The molecular formula is  C[tex]_4[/tex]H[tex]_6[/tex]Br[tex]_4[/tex]. The correct option is option E.

Empirical formula gives the proportion of the element that is present in a compound. It does not give information about the actual number or the arrangements of the atoms.

n=empirical formula mass÷ molecular formula mass

n=1,2,3....

empirical formula mass = 373.69 g/mol

molecular formula mass=  186.85 g/mol

substituting all the given values in the above formula, we get

n=  186.85 g/mol÷  373.69 g/mol

   = 2

Multiply C[tex]_2[/tex]H[tex]_3[/tex]Br[tex]_2[/tex] by 2, which comes out to be C[tex]_4[/tex]H[tex]_6[/tex]Br[tex]_4[/tex].

Therefore, the molecular formula is C[tex]_4[/tex]H[tex]_6[/tex]Br[tex]_4[/tex]. The correct option is option E.

To know more about empirical formula, here:

https://brainly.com/question/14044066

#SPJ2

Metal conductivity generally goes down or resistivity goes up with temperature goes up.

The volume of precipitating reagent, HCl required to precipitate silver in the form of AgCl from 2,000 g of an alloy containing 22% by weight of Ag is 0.530 L

In order to determine the volume of precipitating reagent, HCl required to precipitate silver in the form of AgCl from 2,000 g of an alloy containing 22% by weight of Ag, the following steps are followed:

Step 1.

The concentration of the HCl solution is calculated using the formula:

Percentage purity of HCl = 36% = 0.36

specific gravity, r = 1.17 g/cm³

molar mass of HCl = 36.5 g/mol

Concentration of HCl = 0.36 * 1.17 * 1000 / 36.5 * 1

Concentration of HCl = 11.53 mol/L

Therefore, 1 L of HCl solution contains 11.53 moles of HCl

Step 2:

The equation of the dissociation of HCl solution is given below:

1 mole of HCl produces 1 mole of Chloride ions, Cl⁻

Equation of reaction between Silver in the alloy and HCl is given as follows:

A white precipitate of AgCl is formed but hydrogen gas is not formed as Silver is a less reactive metal.

1 mole of HCl produces 1 mole of Cl⁻ which reacts with 1 mole of Ag to produce 1 mole of AgCl precipitate.

Step 3: Determine the mass and number of moles of silver in the alloy

Mass of silver in 2000 g alloy = 0.22 * 2000 g

Mass of silver in 2000 g alloy = 440 g

Number of moles of silver in 440 g of silver is determined using the formula below:

molar mass of silver = 108 g/mol

number of moles of silver = 440 /108

number of moles of silver in the alloy = 4.074 moles

Step 4: Calculate the volume of HCl required

Since 1 mole of Cl⁻ ions react with 1 mole of Ag; 4.074 moles of Cl⁻ ions will be required to react with 4.074 moles of Ag.

1 L of HCl solution contains 11.53 moles of Cl⁻

Volume of HCl solution that contains 4.074 moles of Cl⁻ = 4.074 * 1L/11.53

Volume of HCl that contains 4.074 moles of Cl⁻ = 0.353 L

Since 1.5 times the amount of precipitating reagent HCl is required, volume of HCl required = 1.5 * 0.353 L

Volume of precipitating reagent HCl required = 0.530 L

Therefore, the volume of precipitating reagent, HCl required to precipitate silver in the form of AgCl from 2,000 g of an alloy containing 22% by weight of Ag is 0.530 L

Learn more about precipitation reactions at: https://brainly.com/question/24944690

Answer:

Homocysteine is though to be a non-protein animo acid. however in vintro studies suggest that Homocysteine is likely to be incorporated by inderict

Answer:

It have 31 electrons

It have 31 electrons

Answer:

residential and domestic sources.

Explanation:

Taking into account the reaction stoichiometry and STP conditions, the volume of nitrogen monoxide gas that is created at STP when 32.2 g of solid copper reacts with excess nitric acid is 7.5677 L.

The balanced reaction is:

3 Cu(s) + 8 HNO₃(aq) → 3 Cu(NO₃)₂ (aq) + 4 H₂O(l) + 2 NO(g)

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

The STP conditions refer to the standard temperature and pressure, which values are 0 °C and 1 atmosphere and are reference values for gases. In these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.

The following rule of three can be applied: if by reaction stoichiometry 190.62 grams of Cu form 2 moles of NO, 32.2 grams of Cu form how many moles of NO?

moles of NO= (32.2 grams of Cu× 2 moles of NO)÷ 190.62 grams of Cu

moles of NO= 0.3378 moles

Then, 0.3378 moles of NO are formed.

Now, you can apply the following rule of three: if by definition of STP conditions 1 mole of NO occupies a volume of 22.4 liters, 0.3378 moles occupies how much volume?

volume= (0.3378 moles× 22.4 L)÷ 1 mole

volume= 7.5677 L

Finally, the volume of NO created is 7.5677 L.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

I believe the volume would turn out to be 2.35M but i could be wrong

Answer:

Hydrogen = 2.5 * 10^21

Explanation:

Chemical Formula Glucose: C₆H₁₂O₆

One of the ways you could do  this is to notice that for every carbon atom there are two Hydrogen atoms. You can state this more formally by using the formula to set up a ratio: 12/6 = hydrogen to Carbon

So if there are 1.250 * 10^21 Carbon atoms in the Glucose sample, then there will be twice as many hydrogen atoms.

H = 2 * 1.25 * 10^21 = 2.5 * 10^21 atoms

You could do this more formally by setting up a proportion.

6 Carbon / 12 Hydrogen = 1.25*10^21 /  x         Cross Multiply

6*x = 12 * 1.25*10^21                                           Combine the right

6x = 1.5 * 10^22                                                  Divide by 6

x = 2.5 * 10^21

Answer:

Coordinate-bond meaning

A type of covalent bond in which both the shared electrons are contributed by one of the two atoms. ... The definition of a coordinate bond is a chemical bond between two atoms when one of the atoms shares a pair of electrons.

Explanation:

Explanation:

is a covalent bond in the sharing of electron pair equally between two atoms in which each atom contribute an electron.

it is form when atomic orbitals of atoms each containing an unpaired electron overlap to share the pair of electrons.

Answer:

D

Explanation:

D is the correct answer due to the fact that they way they are connected has 2 purple atoms and 1 orange one. thus would create a 1:2 ratio with 1 orange atom and 2 purple atoms.

A would create a 2:3 ratio, B wouldn't create a ratio comparable to the others, and C creates a 1:1 ratio with a few purple atoms floating around them, making all of the answers except D invalid.

In the given figures, the name of the model representing a compound with a 1:2 is figure D.

Molar ration of any compound gives idea about the ratio of the concentration of given constituents present in that compound.

In the figure A molar ratio is 2:3, in figure B molar ratio of given constituents is not given because each molecule is composed of same types of atoms, in figure C molar ratio of given constitutes particles is 1:1 and in the figure D molar ratio of constituents is 1:2. Because in figure D, two atoms of one element and 1 atom of another element is present.

Hence, figure D is correct option.

To know more about molar ratio, visit the below link:
https://brainly.com/question/4408248

Answer:

Kinematics is a branch of physics concerned with the geometrically possible motion of a body or system of bodies without considering the  forces which are involved

Hope it helpsssss.!!!!

Answer:

Chromium(III)

PubChem CID 27668

Structure Find Similar Structures

Chemical Safety Laboratory Chemical Safety Summary (LCSS) Datasheet

Molecular Formula Cr+3

Synonyms Chromium(III) Chromic ion chromium(3+) CHROMIUM (III) Chromic cation More

Answer:

Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena. The term law has diverse usage in many cases across all fields of natural science.

Explanation:

I hope this helps

Answer:

Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena. Scientific law differs from scientific theory. The main difference between a law and a theory is that a theory tries to explain the reasoning behind something that occurs in nature, whereas scientific laws are just descriptive accounts of how something occurs in nature.

Answer:

the answer is A because the rest wouldnt go good with the work

Explanation:

Passive prostheses are self-regulating, as shown in the first answer option.

We can arrive at this answer because:

This limitation allows passive prostheses not to need external regulation and to be self-regulated by fitting the body parts.

You can find more information about articulations and their effects on the link:

https://brainly.com/question/5847359?referrer=searchResults

Answer:

self-powered.