Answer:
It is right or wrong I cannot say if it is wrong forgive me.
Answer:
The energy in the system will likely be exchanged, but the matter will not be exchanged.
Explanation:
According to the first law of thermodynamics, also known as Law of Conservation of Energy, energy can neither be created nor destroyed; energy can only be transferred or changed from one form to another. The law of conservation of mass also states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change.
PLEASE HELP CHEMISTRY
What is the hydronium ion concentration of a solution with a POH of 6.90?
O 6.29 x 10-7 M
6.53 x 10-7 M.
O 7.18 x 10-8 M
O 7.94 x 10-8 M
Answer:
O 7.94 x 10-8 M
Explanation:
Did the test
The hydronium ion concentration of a solution with a pOH of 6.90 is 7.94 × 10⁻⁸ M.
What is the relation between pH & pOH?Relation between the pH and pOH will be represented by the below equation as:
pH + pOH = 14
Given that pOH = 6.90
So, pH = 14 - 6.90 = 7.1
Also we know that, pH = -log[H⁺]
[H⁺] = [tex]10^{-pH}[/tex]
[H⁺] = [tex]10^{-7.1}[/tex]M
[H⁺] = 7.94 × 10⁻⁸ M
Hence the concentration of hydronium ion is [tex]10^{-7.1}[/tex] M.
To know more about pH & pOH, visit the below link:
https://brainly.com/question/17144456
#SPJ2
Which is the pathway of light as it travels through the eye?cornea → iris → retina → lenscornea → iris → lens → retinairis → cornea → lens → retinaretina → lens → iris → cornea
Answer:
Cornea >iris>lens >retina
Explanation:
Can't exactly figure out the answer but I think it should look like this
Answer: cornea → iris → lens → retina
Explanation: I have my ways ;>
Help me with my Science, Part 1 and 2 please this has to be done by tomorrow
Answer:
Part 1: Condensation is when - a
Condensation happens when- water vapour suddenly freezes
Part 2: Water, condenses, vapour, cold, droplets, Condensation
What is the frequency of 14000 X ray photons having an energy of 5.27*10-5 J/Hz
The frequency of the X - ray is [tex]7.95 \times 10^{28} \ Hz[/tex].
The given parameters:
Energy of the X-ray, E = 5.27 x 10⁻⁵ JThe frequency of the wave is calculated as follows;
[tex]E = hf\\\\f = \frac{E}{h} \\\\[/tex]
where;
h is Planck's constant = 6.626 x 10⁻³⁴ J/HzSubstitute the given parameters;
[tex]f = \frac{E}{h} \\\\f = \frac{5.27 \times 10^{-5} }{6.626 \times 10^{-34}} \\\\f = 7.95 \times 10^{28} \ Hz[/tex]
Thus, the frequency of the X - ray is [tex]7.95 \times 10^{28} \ Hz[/tex].
Learn more about frequency of radiation here: https://brainly.com/question/13400312
fe3(so4)3->fe(oh)3->fe2o3->fe->feso4->fecl2
Answer: Id answer it but i think your copy and paste got corrupted!
Explanation:
How many moles of AgNO3 must react to form 0. 854 mol Ag? mol AgNO3.
The moles of silver nitrate required to form 0.854 mol silver ion has been 0.854 mol.
The balanced chemical equation for the dissolution of silver nitrate has been:
[tex]\rm AgNO_3\;\rightarrow\;Ag^+\;+\;NO_3^-[/tex]
The aqueous solution of silver nitrate has been dissociated into the constituent silver and nitrate ions.
In a balanced chemical equation, the coefficient has been equivalent to the moles of each reactant forming the moles of product.
From, the balanced equation,
[tex]\rm 1\;mol\;AgNO_3=1\;mol\;Ag[/tex]
The given moles of Silver has been 0.854 mol. Thus, the moles of silver nitrate required has been given as:
[tex]\rm 1\;mol\;Ag^+=1\;mol\;AgNO_3\\0.854\;mol\;Ag^+=0.854\;\times\;1\;mol\;AgNO_3\\0.854\;mol\;Ag^+=0.854\;mol\;AgNO_3[/tex]
The moles of silver nitrate required to form 0.854 mol silver ion has been 0.854 mol.
For more information about the moles produced, refer to the link:
https://brainly.com/question/10606802
Help
what is isotopes
why must a ph meter be calibrated by using a solution with a known ph value
Answer:
A pH calibration is the process of adjusting your pH meter by measuring solutions of a known pH value. This is because the characteristics of your electrode will change over time and this needs to be compensated for. A calibration does this by matching your pH meter to the current characteristics of your pH sensor.
Explanation:
What is the excess reactant of water?
Answer:
Hydrogen
Explanation:
An example of this can be In this example, hydrogen is the limiting reagent and oxygen is the excess reagent. The amount of product formed is limited by the amount of hydrogen.
mass is the gravitational pull on the earth
-tru
-fals
plz help
Answer:
I believe the answer is false
Explanation:
Earth's gravity comes from all of its mass. All the mass makes a combined gravitational pull on all the mass in an object. If you were on a planet with less mass than Earth, you would weigh less than you do here. Mass is the quantity of matter in a physical body. It is also a measure of the body's inertia, the resistance to acceleration when a net force is applied. An object's mass also determines the strength of its gravitational attraction to other bodies. Mass is not the gravitational pull on the earth.
Which element has a greater Ist ionization energy, Phosphorus or Fluorine?
Answer:
phosphorus
Explanation:
The most recent model of an atom is the_____.
Points: 67
Answer:
answer is electron cloud model
A tank of syngas produced by coal gasification contains 60.0% carbon monoxide, 30.0% hydrogen, and 10.0% carbon dioxide. What is the mass of hydrogen (in g) in 1.00 cubic meter of this syngas mixture at 1.00 atm and 25.0 °C? (1 m³ = 1000 L)
Considering the ideal gas law, the mass of hydrogen is 24.552 grams.
An ideal gas is a theoretical gas that is considered to be composed of randomly moving point particles that do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:
P× V = n× R× T
In this case, you know:
P= 1 atmV= 1 m³= 1000 Ln= ?R= 0.082[tex]\frac{atmL}{molK}[/tex]T= 25 °C= 298 °KReplacing in the ideal gas law:
1 atm× 1000 L = n× 0.082[tex]\frac{atmL}{molK}[/tex]× 298 K
Solving:
[tex]n=\frac{1 atmx1000 L}{0.082 \frac{atmL}{molK}x298 K}[/tex]
n= 40.92 mol
The mol of syngas mixture is 40.92 mol.
Syngas mixture contains 30.0% hydrogen. So, there is a mol fraction of [tex]x_{hydrogen} =[/tex]0.3 . Thus, the mols of hydrogen in syngas mixture is calculated as:
40.92 moles of syngas mixture× 0.3= 12.276 moles of hydrogen
Finally, being the molar mass of hydrogen H₂ 2 [tex]\frac{g}{mole}[/tex], then the mass is:
[tex]12.276 molesx\frac{2 grams}{1 mole}[/tex]= 24.552 grams
In summary, the mass of hydrogen is 24.552 grams.
Learn more about ideal gas law:
https://brainly.com/question/4147359?referrer=searchResultsHow does temperature affect winds all
over the globe?
Answer:
The differences in atmospheric pressure generate winds.
Explanation:
At the Equator, the sun warms the water and land more than it does the rest of the world. Warm equatorial air rises higher into the atmospher and migrates towards the poles. The complex relationships between fronts cause different types of winds and weather patterns.
I hope this helps :)
¿Cómo pueden los padres pasar a sus
hijos rasgos como el color de ojos?
Answer:
Los padres transmiten rasgos o características, como el color de ojos y el tipo de sangre, a sus hijos a través de sus genes. Algunas condiciones de salud y enfermedades también pueden transmitirse genéticamente. A veces, en
Why can't percent yield be greater than one hundred percent?
Answer:
Percent yield is the maximum amount of product that can be formed in a reaction. Matter cannot be created or destroyed according to the law of conservation of mass, so you cant have over 100%.
Explanation:
If a number has the units g/L then its
A) a number we are not going to use at all.
B) an imaginary unit that we are not going to use.
C) creating a relationship between mass and volume
D) a relationship between volume and distance.
Answer:
C) creating a relationship between mass and volume
g/L
g or gram is mass
L or Litres is for volume
What is the chemical composition of dry ice?
Answer:
Dry ice is the solid form of carbon dioxide (CO 2), a molecule consisting of a single carbon atom bonded to two oxygen atoms. Dry ice is colorless, odorless, and non-flammable, and can lower the pH of a solution when dissolved in water, forming carbonic acid (H 2 CO 3).
Explanation: i asked my teacher and this was her response.
which statement describes how vapor pressure occurs? (1 point)
a) Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert
pressure on the substance.
b) Some molecules of a substance have low enough kinetic energy to melt. These molecules exert pressure on the substance
c) Some molecules of a substance have low enough kinetic energy to vaporize. These molecules exert
pressure on the substance.
d) Some molecules of a substance have high enough kinetic energy to melt. These molecules exert pressure on the substance
Some molecules in a substance have a high kinetic energy hence they are able to convert into vapor. These molecules exert pressure on the liquid surface.
We know that the molecules that compose matter are in constant random motion. The kinetic energy of all the molecules in the liquid are not the same. The molecules at the surface of the liquid posses more kinetic energy than the molecules below.
Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert pressure on the substance.
Learn more: https://brainly.com/question/25273232
Answer:
Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert pressure on the substance.
Explanation:
The speed at which a chemical reaction proceeds is called
Answer:
Answer: Reaction Rate
Explanation:
reaction rate, in chemistry, the speed at which a chemical reaction proceeds. It is often expressed in terms of either the concentration (amount per unit volume) of a product that is formed in a unit of time or the concentration of a reactant that is consumed in a unit of time.
Which materials are used to make concrete select all that apply
Answer:
cement air water sand and gravel
Explanation:
Answer:
Explanation:
The principal ingredients that make up the concrete mix are: cement, fine aggregate, coarse aggregate, water, chemical admixtures, and mineral admixtures.
Crumpling and tearing cause physical changes to a piece of paper.
Which two characteristics of the paper change?
A. Size
B. Reactivity
I C. Identity
I D. Shape
Please help I’ll give brainlist and no spamming or links just please help
size and shape. only the appearance of the paper will have changed, but is reversible.
A sample of tin (Cp = 0. 227 J/g•°C) is placed in a freezer. Its temperature decreases from 15. 0°C to â’10. 0°C as it releases 543 J of energy. What is the mass of the sample? Round your answer to three significant figures. G.
Taking into account the definition of calorimetry, the mass of the sample is 478.41 grams.
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case, you know:
Q= -543 J because the energy is releasesc= 0.227 [tex]\frac{J}{gC}[/tex]m= ?ΔT= Tfinal - Tinitial= 10 C - 15 C= -5 CReplacing:
-543 J= 0.227 [tex]\frac{J}{gC}[/tex]× m× (-5 C)
Solving:
[tex]m=\frac{-543 J}{0.227 \frac{J}{gC}x(-5 C)}[/tex]
m=478.41 grams
In summary, the mass of the sample is 478.41 grams.
Learn more about calorimetry:
brainly.com/question/11586486?referrer=searchResults brainly.com/question/24724338?referrer=searchResultswhich of the following atom could reside in the same group? Explain your answer
Mr. Jenson's class is observing the growth of one kind of pea plant.
The class wants to design an experiment to answer the question, "What amount of water will cause the plants to produce the greatest number of peas?"
What could the class do to create the experiment?
A.
give all the pea plants the same amount of water and count the number of peas that the plants produce
B.
give all the pea plants different amounts of water and only guess the number of peas that the plants produce
C.
give all of the pea plants different amounts of water and count the number of peas that the plants produce
D.
stop watering all of the pea plants and then count the number of peas that the plants produce
Answer:
The answer would be C. Giving the pea plants a different amount of water in each one can help you observe how much water produces the most peas in a pea pod.
The answer is C to give all of the pea plants different amounts of water and count the number of peas that the plants produce
Explanation:
Answer:
C. give all of the pea plants different amounts of water and count the number of peas that the plants produce
Explanation:
The class wants to design an experiment that answers the question, "What amount of water will cause the plants to produce the greatest number of peas?"
To answer the question, the experiment should show how many peas the plants produce when they are given different amounts of water. The best way to do this would be to give all of the plants different amounts of water and count the number of peas that the plants produce.
Part 1: Name the type of chemical reaction that occurs when magnesium chloride
solution (MgCl2) reacts with sodium carbonate solution (Na2CO3).
Part 2: Explain why aluminum (AI) would react with copper chloride (CuCl2) but not with
magnesium chloride (MgCl2).
Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.
A chemical reaction is said to have occurred when new substances are formed. The reaction between magnesium chloride solution and sodium carbonate solution is a double decomposition reaction since the cations exchange anion partners in the product;
MgCl2(aq) + Na2CO3(aq) ------> MgCO3(s) + 2NaCl(aq)
We must note that a single replacement reaction depends on the relative positions of metals in the electrochemical series. Al can react with CuCl2 because Al is more reactive than copper and ahead of Cu in the electrochemical series. On the other hand, Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.
Lear more about electrochemical series: https://brainly.com/question/25749323
A student is asked to describe three random
elements found on the periodic table. All three
elements will FOR SURE have which of the two
following characteristics?
A. similar color and texture
B. shininess and value
C. mass and volume
D. similar boiling and freezing points
All three elements in the periodic table will for sure have characteristic of mass and volume.
What is an element?
An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom which is characteristic of it's own. Due to this reason all elements are different from one another.
Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/14347616
#SPJ2
How does lemon juice stop an apple from turning brown?
The very act of you observing something
will disturb the system is known as:
Answer:
The observer effect is the answer.
A compound contains 40%carbon, 6.7%hydrogen, and 56.3%oxygen
calculate the molecular formula of the compound, if it’s vapour density is 90. Note that molecular
mass=2 x vapeur density