a race car is traveling at a speed of 80.0m/s on a circular race track of radius 450m what is the centripetal acceleration

Considering the change of units and the definition of weight, the mass of two washers would be 0.0098 kg and if 4 washers are attached to the string, then the applied force on the car will be 0.196 N.

If each washer has a mass of 4.9 g, then the mass of two washers will be calculated simply by multiplying the mass of 1 washer by the amount you have of them, in this case 2:

4.9 g×2= 9.8 g

Being 1 kg = 1000 g, you apply the following rule of three to make the change of units: if 1000 g equals 1 kg, 9.8 g equals how many kilograms?

[tex]mass=\frac{9.8 gramsx1 kg}{1000g}[/tex]

Solving:

mass= 0.0098 kg

Finally, the mass of two washers would be 0.0098 kg.

On the other side, mass is the amount of matter that a body contains and weight is the action exerted by the force of gravity on the body.

The mass of an object will always be the same, no matter where it is located. Instead, the weight of the object will vary according to the force of gravity acting on it.

Weight is calculated as the product of the object's mass and the value of the gravitational acceleration:

W= m×g

In this case, you know:  

Replacing:

W= 0.0196 kg× 10 m/s²

Solving:

W= 0.196 N

Finally, if 4 washers are attached to the string, then the applied force on the car will be 0.196 N.

Learn more:

Answer:

C, B

Explanation:

Answer:

correct

Explanation:

In physics, a force is any interaction that, when unopposed, will change the motion of an object. A force can cause an object with mass to change its velocity (which includes to begin moving from a state of rest), i.e., to accelerate. Secondly, what force is necessary to change an object's motion?

Answer:

force

Explanation:

got it right on the test

The minimum number of overload units for a three-phase AC motor's protection is THREE (3). It is a polyphase motor.

Three-phase motors are polyphase motors, which can be induction motors or synchronous motors.

A three-phase motor is organized to run on three-phase alternating current (AC) electrical power, which is required for diverse industrial devices that use a lot of electrical energy.

These motors (three-phase motor) are composed of a stator (the outer part), a rotor (rotating part), and the enclosure (the external skeleton).

Learn more about three-phase motors here:

https://brainly.com/question/14329442

A black hole forms as a star collapses when it ceases emitting radiation from fusion reactions. This occurs after the star has consumed hydrogen, helium, then through iron.

Star evolution refers to the process by which stars evolve (change) over time.

A black hole can be defined as a collapsed star where the gravitational field in its nucleus becomes greater than particles cannot escape from it.

In consequence, black holes are cosmic bodies in which gravity is so powerful that nothing (i.e., particles, radiation, light, etc.) can escape from them.

Nuclear fusion refers to the energy reactions produced by the fusion of hydrogen at the core of a star, thereby becoming helium.

Learn more about black holes here:

https://brainly.com/question/10597324

Answer:

refraction

Explanation:

but this is easy so why

Answer:

Friction is a force that tends to oppose the relative motion between two bodies in contact. Frictional force always acts on a moving body from the direction opposite to the direction of motion. It opposes the motion, and therefore, helps to reduce the speed of the moving object. It is a contact force.

Other than temperature, the property that also has an effect on the rates of chemical reactions is the concentration of the reactants. The correct answer is B

The rate of chemical reaction means how chemical react with respect to time or as a function of time. The rate of chemical reaction tells us the speed or how fast chemicals react.

There are many factors that can affect the rate of chemical reaction. Temperature is one of them. Increase in temperature will increase the rate at which chemical react.

The color of reactants, solubility of reactants and volume of reactants have nothing to do with the rate of chemical reaction.

Other than temperature, the property that also has an effect on the rates of chemical reactions is the concentration of the reactants.

Other factors affecting the rate of chemical reaction are:

Therefore, the correct answer is option B

Learn more about chemical reaction here: https://brainly.com/question/11231920?source=archive

The approximate length of the arc intersected by the central angle is 20.94 inches.

The given parameters:

The approximate length of the arc intersected by the central angle is calculated as follows;

S = rθ

where;

Substitute the given parameters and solve for the length of the arc

[tex]S = 10 \ in \times \frac{2\pi }{3} \\\\S = 20.94 \ inches[/tex]

Thus, the approximate length of the arc intersected by the central angle is 20.94 inches.

Your question is not complete, find the complete question below:

A circle has a radius of 10 inches. Find the approximate length of the arc intersected by a central angle of [tex]\frac{2\pi}{3}[/tex].

Learn more about length of arc here: https://brainly.com/question/2005046

Answer:

White light is a combination of all colors in the color spectrum.

Explanation:

It has all the colors of the rainbow. Combining primary colors of light like red, blue, and green creates secondary colors: yellow, cyan, and magenta

Answer:

0.7m/s

Explanation:

According to the conservation of linear momentum, the moment before a collision is equal to the moment after the collision. The equation is written as follows: [tex]m_{a}u_{a} + m_{b}u_{b} = m_{a}v_{a} + m_{b}v_{b}[/tex], where [tex]m[/tex] is the mass of the object, [tex]u[/tex] is the initial velocity, and [tex]v[/tex] is the final velocity.

Let's say the object [tex]a[/tex] is our moving wagon and the object [tex]b[/tex] is our stationary wagon. [tex]m_{a} = 500kg, u_{a} = 1.6ms^{-1}[/tex],  [tex]m_{b} = 3000kg, u_{b} = 0[/tex], since the wagon is stationary, it doesn't have any initial velocity. After collision, the mass remains the same, but the velocity changes: [tex]v_{a} = ?, v_{b} = 1.5ms^{-1}[/tex]

We can observe that [tex]v_{a}[/tex] is what we're looking for according to the question. Now let's substitute our values.

[tex](5000 * 1.6) + (0) = 5000v_{a} + (3000 * 1.5)[/tex]

[tex]v_{a} = \frac{(5000 * 1.6) - (3000*1.5)}{5000}[/tex] = 0.7m/s

Answer:

it’s the third option: 4,600,000 km

Explanation:

just took the test and that was correct

[tex]\\ \sf\longmapsto F=\dfrac{Gm_1m_2}{r^2}[/tex]

[tex]\\ \sf\longmapsto F=\dfrac{Gm^2}{r^2}[/tex]

[tex]\\ \sf\longmapsto G=\dfrac{Fr^2}{m^2}[/tex]

SI units:-

[tex]\\ \sf\longmapsto G=\dfrac{Nm^2}{kg^2}[/tex]

Option C is correct

Answer:

The anomalous expansion of water is an abnormal property of water whereby it expands instead of contracting when the temperature goes from 4o C to 0o C, and it becomes less dense. The density is maximum at 4 degree centigrade and decreases below that temperature as shown in graph.

Explanation:do you want me to explain it more??

Answer:

gravitational force

...........

Answer:

C is the right answer for the question

Explanation:

Final velocity=Initial velocity+(acceleration×time)

4 ways to find initial velocity:

1) Initial velocity=Final velocity-(acceleration×time)

2) Initial velocity=(Distance/Time)-((acceleration×time)/2)

3) Initial velocity=√Final velocity-(2×(acceleration×distance))

4) Initial velocity=2(distance/time)-Final velocity

Total force = Mass×Acceleration

(F=ma)

Answer: 6 OR 7

Explanation:

Answer:

The fibers of the sweater lose electrons.

The average velocity of the car for the whole journey is 69.57 km/h.

The given parameters:

The time spent by the before refueling is calculated as follows;

[tex]t = \frac{d}{v} \\\\t_1 = \frac{240}{75} \\\\t_1 = 3.2 \ hours[/tex]

The time spent by the car for the remaining journey;

[tex]t_3 = \frac{320 - 240}{100} \\\\t_3 = 0.8 \ hr[/tex]

The total time of the journey is calculated as follows;

[tex]t = t_1 + t_2 + t_3\\\\t = 3.2 \ hr \ + \ 0.6 \ hr \ + \ 0.8 \ hr\\\\t = 4.6 \ hours[/tex]

The average velocity of the car for the whole journey is calculated as follows;

[tex]v = \frac{total \ distance }{total \ time} \\\\v = \frac{320}{4.6} \\\\v = 69.57 \ km/h[/tex]

Learn more about average velocity here: https://brainly.com/question/6504879

Answer:

bugs/viruses all the time and more social platforms

Explanation:

The two chemical compounds having a molar ratio of 1 : 1 is CO₂ and K₂CO₃

                4KO₂ + 2CO₂ —> 2K₂CO₃ + 3O₂

                4       :    2         :   2       :       3

From the balanced equation above, the coefficients are 4, 2, 2, 3

A careful observation of the equation shows that CO₂ and K₂CO₃ exist in ratio 2 : 2 which can be simplified as 1 : 1

Therefore, we can conclude that CO₂ and K₂CO₃ has molar ratio of 1 : 1

Learn more about stiochoimetry: https://brainly.com/question/25830314

Answer:

Earth's mass is 5.98 x 1024 kg and has a radius of 6.37 x 106 m. 8.06 N/kg ... what would be the weight of a 70.0-kg student on the surface of Jupiter?Explanation:

Answer:

Option B, 5.4m/s

Explanation:

Using the formula v² = u ² - 2gh

v = 0(final velocity is zero at maximum height), u = ?, g = 9.81m/s², h = 1.5m

0² = u² - 2×9.81×1.5

0 = u² - 29.43

29.43 = u²

u = √29.43

= 5.42m/s

v = d/t

= 400/25

= 16 m/s

I'm not sure though

Answer:

first number is 113 and the second number is 15

According to the plot, static friction force has a maximum magnitude of around 3.0 N, and kinetic friction has a magnitude of about 1.5 N.

The plot appears to be telling you the force required to get the yellow block moving along the table. If one applies less than 3.0 N of force, the block remains motionless. But as soon as it starts to slide, one need only apply 1.5 N of force to keep it moving (presumably at a constant speed).

Answer:

23: Acceleration 24:1m/s^2

Explanation:

[tex]a = (v_f - v_i) /delta(t)\\a=(16-10)/6\\a=6/6\\a=1m/s^2[/tex]

Answer:

1. Body Tube

2.Revolving Nose Piece

3.Low Objective

4.Med Objective

5.High Objective

6.Stage clips

7.Diaphragm

8.Light source

9.Ocular lens

10. Arm

11.Stage

12.Coarse Adjustment knob

13.Fine Adjustment knob

14. base

Answer:

The quantity of heat given to body depends on: (i) The mass of the body, (ii) The rise (or fall) in the temperature of the body, and (iii) Nature of the material of the body.

Explanation:

Hope this helps

have a great day

~Zero

Answer:

option 4 is the correct answer