A car travels initially at 24 m/s, until it enters the highway. If the car accelerates at 4 m/s^2 for a 96 meters, what is the car's new velocity?

Answer:

asdiieiwihebebwiwo3o2iwjw3

Answer:

Parallel

Explanation:

The work done is defined as the force applied on an object and the displacement in the position of the object in the direction of force.

W = F s cos A

where, F is the force, s is the displacement and A is the angle between force and displacement.

When the angle between the force and the displacement is 90 degree, the work done is zero.

To get the maximum work the angle between the force and the displacement is 0 degree.

So, to get the work done by the force the angle between the force and displacement is 0 degree that means the force and displacement is parallel to each other.

Answer:

10N is the answerrrerreer

Answer:

f= 100N

Explanation: F=m×(v₀-vf/t)

=0.05ₓ(200-0/0.1)

=0.05ₓ2000

=100N

please mark as brainliest

Answer:

[tex]8.4 \times 10^{5}\; \rm J[/tex], assuming that there's no heat exchange between the washing machine and the environment.

Explanation:

Let [tex]m[/tex] denote the mass of water and [tex]c[/tex] the specific heat capacity of water. The energy required to raise the temperature of that much water by [tex]\Delta T[/tex] would be:

[tex]Q = c \cdot m \cdot \Delta T[/tex].

Washing at [tex]30\; \rm ^{\circ} C[/tex] would require a temperature change of [tex]\Delta T = 30\; \rm ^{\circ} C - 16\; ^{\circ} \rm C = 14\; \rm K[/tex].

Washing at [tex]50\; \rm ^{\circ} C[/tex] would require a temperature change of [tex]\Delta T = 50\; \rm ^{\circ} C - 16\; ^{\circ} \rm C = 34\; \rm K[/tex].

In both situations, [tex]c = 4.2 \times 10^{3}\; \rm J \cdot kg \cdot K^{-1}[/tex] while [tex]m = 10\; \rm kg[/tex].

Calculate the energy required in either situation:

Washing at [tex]30\; \rm ^{\circ} C[/tex]:

[tex]\begin{aligned}& Q({30\; ^{\circ} {\rm C}}) \\ &= c \cdot m \cdot \Delta T \\ &= 4.2 \times 10^{3}\; \rm J \cdot kg \cdot K^{-1} \times 10\; \rm kg \times 14\; \rm K \\ &= 588000 \times 10^{5}\; \rm J\end{aligned}[/tex].

Washing at [tex]50\; ^{\circ} {\rm C}[/tex]:

[tex]\begin{aligned}& Q({50\; ^{\circ} {\rm C}}) \\ &= c \cdot m \cdot \Delta T \\ &= 4.2 \times 10^{3}\; \rm J \cdot kg \cdot K^{-1} \times 10\; \rm kg \times 34\; \rm K \\ &= 1428000 \; \rm J\end{aligned}[/tex].

[tex]1428000\; \rm J - 588000\; \rm J = 8.4 \times 10^{5}\; \rm J[/tex].

Answer:

Explanation:

We first need to convert the 40 km/h to m/s. Going by the fact that 40 has only 1 significant figure in it, 40 km/h = 10 m/s. The rest of the values are in their proper labels. We will use the equation:

[tex]v^2=v_0^2+2a[/tex]Δx where the final velocity is 0 because the car is coming to a stop at the end; the initial velocity is 10 m/s, the acceleration (or, rather, deceleration) is -.5 m/s/s, and our unknown which is displacement. Filling in:

[tex]0=(10)^2+2(-.5)[/tex]Δx and solving for Δx:

Δx = [tex]\frac{-100}{2(-.5)}[/tex] which ends up being simply that

Δx = 100 m

Answer:

A body having uniform velocity has zero acceleration because

there is not change in velocity.

Answer:

4360 Kgm/s

Explanation:

Applying,

Ft = M-M'................. Equation 1

Where F = force, t = time, M = Final momentum, M' = Initial momentum.

make M the subject of the equation

M = Ft+M'............ Equation 2

From the question,

Given: F = 4000 N, t = 0.9 seconds, M' = 400 kg-m/s

Substitute these values into equation 2

M = 4000+(0.9×400)

M = 4000+360

M = 4360 kgm/s

Hence the final momentum is 4360 kgm/s

Answer:

sorry but which class your talking 'bout

Answer:

D) crystalline solid that conducts current under certain conditions

Explanation:

A semiconductor is any crystalline solid material whose electrical conductivity is intermediary between that of insulators and conductors. That is, a semiconductor does not conduct like a conductor but does more than an insulator.

Based on this, a semiconductor is said to only conduct electricity under certain conditions as opposed to conductors that do so under any condition. Example of semiconductors are silicon, carbon, antimony, arsenic etc.

Answer:

a. Effort = 960 Newton

b. Mechanical advantage (M.A) = 0.625

c. Velocity ratio (V.R) = 1.67

Explanation:

Given the following data;

Conversion:

100 cm = 1 m

X cm = 0.75 m

Cross-multiplying, we have;

X = 0.75 * 100 = 75 cm

First of all, we would find the effort arm;

Effort arm = length of crow bar - length of load arm

Effort arm = 200 - 75

Effort arm = 125 cm

Next, we would determine the mechanical advantage (M.A) of the crow bar;

[tex] M.A = \frac {Effort \; arm}{Load \; arm} [/tex]

Substituting the values into the formula, we have;

[tex] M.A = \frac {125}{200} [/tex]

M.A = 0.625

To find the effort of the crow bar;

[tex] M.A = \frac {Load}{Effort} [/tex]

Making "effort" the subject of formula, we have;

[tex] Effort = \frac {Load}{M.A} [/tex]

[tex] Effort = \frac {600}{0.625} [/tex]

Effort = 960 Newton

Lastly, we would determine the velocity ratio (V.R);

[tex] V.R = \frac {length \; of \; effort \; arm}{length \; of \; load \; arm} [/tex]

[tex] V.R = \frac {125}{75} [/tex]

V.R = 1.67

Answer:

Wave-cut cliff, sea arch, sea stacks

Explanation:

The effect of a wave erosion is made obvious by the structures formed by the wave action.

The high areas of land adjacent to the incoming wave develop the early features or the formation of wave action, which includes the wave-cut cliff

The continuous undercutting of the cliff by the wave results in the formation of the wave cut platform

The effect of the wave further on a cliff, results in the formation of a sea arch and finally a sea stack

Therefore, the correct sequence is the wave-cut cliff, sea arch, sea stacks

Respuesta:

7,6 Ω

Explicación:

Paso 1: Información dada

Paso 2: Hallar la resistencia (R) a 100 °C

Podemos ver la relación entre la resistencia de un material y la temperatura usando la siguiente ecuación.

R = R₀ (1  + α × ΔT)

R = 6 Ω (1  + 0,00392 °C⁻¹ × (100 °C - 30 °C)) = 7,6 Ω

Answer:

With air resistance, acceleration throughout a fall gets less than gravity (g) because air resistance affects the movement of the falling object by slowing it down. How much it slows the object down depends on the surface area of the object and its speed

Explanation:

PLZ MARK AS THE BRAINLIEST

HAVE A GOOD DAY

: )

Answer:

m1=100kg

m2=6×10^24kg

r=6400km

G=6.6×10^-11

F=?

as we know that

F=G m1.m2/r²

F=6.6×10^-11×100×6×10^24/(6400)²

F=6.6×10^-11×6×10^26/4.096×10^7

F=6.6×10^-11×1.465×10^19

F=9.67×10^8N

Answer:

ccccccccc or bbbbbbb or aaaaaaaa or ddddddd

Answer:

Given information:-

[tex]\clubsuit[/tex]The displacement of the cyclist will be shortest distance from his initial to final positions which is nothing but diameter of the circle = 2r

We know that,

[tex] \underline{ \boxed{ \sf{Speed = \frac{Distance \: covered }{Time \: taken}}}}[/tex]

[tex]\longrightarrow \sf{\frac{636 \times 3.14 m}{90s}} \\ \\ \longrightarrow \sf22.18 m/s[/tex]

[tex]\sf{Velocity = \frac{Displacement }{ Time} }[/tex]

[tex]\longrightarrow \sf{ \frac{2 \times 636m}{90s} } \\ \\ \longrightarrow \sf{14.13 \: m/s}[/tex]

Thank You :)

Answer:

two childrens are sitting on a see saw but can't swing.it means both weight is same (a=b)

Explanation:

Answer:

which subject is that question

a) gia tốc = vf-vi / t

a = 14-10 / 20

a = 0,2ms⁻²

b) dưới dạng a = Δv / t

v = lúc

v = 0,2 × 40

v = 8ms⁻¹

như v = d / t

do đó d = vt

d = 8 × 40

d = 320m

hãy đánh dấu là trí óc nhất

Answer:

Answer:- Volume of the balloon is 5.78 L.

Solution:- There are 0.24 moles of hydrogen gas in a balloon at 35 degree C and 1.05 atm pressure. It asks to calculate the volume of the balloon.

This problem is based on ideal gas law equation:

P = 1.05 atm, n = 0.24 mole, T = 35 + 273 = 308 K

R =

V = ?

The equation could be rearranged for the volume as:

Let's plug in the values and do the calculations to get the volume of the balloon:

V = 5.78 L

So, the volume of the gas balloon is 5.78 L.

Answer:

Una rueda tiene 4 cm de diametro y realiza 200 vueltas cada 4 minutos calcular a frecuencia b el periodo c la velocidad lineal l tangencial

personal to systematic errors

unbiased to random errors

Answer:

Explanation:

[tex]a=\frac{v_f-v_0}{t}[/tex] We don't yet need the mass of the car, as we can see by this equation. What we do need is the velocity of the car, the initial velocity, in meters per second, and right now it's in km/hr. Not good. We need to convert. The conversion is as follows:

[tex]54\frac{km}{hr}*\frac{1000m}{1km}*\frac{1hr}{3600s}=15\frac{m}{s}[/tex] Ok, that's good. Now we have everything we need but the time element. If the car traveled a distance of 40 meters at 15 m/s, then we can use the d = rt equation to solve for t, and when we find t we plug it into the acceleration equation:

40 = 15t and

t = 2.7 seconds. The car traveled for 2.7 seconds to go that 40 meters. That's the only reason we were given the displacement. We need it for nothing else but that.

Filling in the acceleration equation now:

[tex]a=\frac{0-15}{2.7}=-5.6\frac{m}{s^2}[/tex] and the negative indicates we are in fact slowing down. That's the answer for the acceleration portion of the problem; now we need the force, F, applied to the brakes.

F = ma where m is mass (we get to use that value now!) and a is -5.6 m/s/s.

F = 500(-5.6) and

F = -2800 N and the negative here means that the force of the brakes is acting against the motion of the car: the brakes are pulling the car "backwards" to stop while the car's motion is forward. The negative indicates the direction the force is being applied.

Answer:

301.6 N

Explanation:

The length of the wire L₀ = 8 m and its diameter, d = 4 mm = 4 × 10⁻³ m. Since its temperature drops by  10°C, it will have a change in length ΔL = L₀αΔθ where α = linear expansivity of steel, a 12 × 10⁻⁶ /K, and Δθ = temperature change = -10°C = -10 K(negative since it is a drop)

So, the strain, ε = ΔL/L₀ = αΔθ = 12 × 10⁻⁶ /K × 10 K = 12 × 10⁻⁵

Now the Young's modulus of steel, Y = σ/ε where σ = stress = T/A where T = increase in tension in steel wire and A = cross-sectional area of wire = πd²/4 where d = diameter of wire = 4 × 10⁻³ m and ε = strain = 12 × 10⁻⁵

So, σ = Yε

Since Y = 2 × 10¹¹ N/m².

Substituting the values of the variables into the equation, we have

σ = Yε

σ = 2 × 10¹¹ N/m² × 12 × 10⁻⁵

σ = 24 × 10⁶ N/m²

Since σ = T/A

T = σA

T = σπd²/4

Substituting the values of the variables into the equation, we have

T = σπd²/4

T = 24 × 10⁶ N/m² × π × (4 × 10⁻³ m)²/4

T = 24 × 10⁶ N/m² × π × 16 × 10⁻⁶ m²/4

T = 24 × 10⁶ N/m² × π × 4 × 10⁻⁶ m²

T = 96 N × π

T = 301.59 N

T ≅ 301.6 N

So, the increase in tension in the steel wire is 301.6 N

Answer:

(b) 1/sinƟ

Explanation:

A simple machine can be defined as a type of machine with no moving parts but can be used to perform work.

Basically, a simple machine allows for the transformation of energy into work. The six simple machines are; lever, wedge, pulley, screw, wheel and axle, and inclined plane.

Inclined plane is a simple machine set at an angle and then used to lift an object.

In Physics, the velocity ratio of a simple machine is calculated as a ratio of the distance moved by the effort to the vertical distance through which a load is raised.

Mathematically, the velocity ratio of an inclined plane of angle Ɵ, acting as a simple machine is given by the formula;

Velocity ratio (V.R) = 1/sinƟ

Basically, an increase in the angle of inclination (measured in degrees) of an inclined plane increases its velocity ratio.

Answer:

Take water as an example; the size, shape and chemical composition of the water particles remains the same whether it is solid water (ice) or gaseous water (steam) - but how those particles move and are arranged is different for

Answer:

The net force is 91780.8 N.

Explanation:

mass, m = 8950 kg

Radius, R = 9.33 miles = 15015.2 m

Time, T = 0.123 h = 442.8 s

There are two forces acting on the plane.

Horizontal force is the centripetal force and the vertical force is the weight.

[tex]Fx =m R w^2\\\\Fx = m R \frac{4\pi^2}{T^2}\\\\Fx = 8950\times 15015.2\times \frac{4\times 3.14\times 3.14}{442.8\times 442.8}\\\\Fx = 27030.8 N \\\\Fy = m g \\\\ Fy = 8950\times 9.8 \\\\Fy = 87710 N[/tex]

The net force is

[tex]F = \sqrt{Fx^2 + Fy^2}\\\\F = \sqrt {27030.8^2 + 87710^2}\\\\F = 91780.8 N[/tex]

Answer: True

Explanation:

It should be noted that when refrigerant is added in vapor form to the operating refrigeration system, then the addition of the refrigerant should be to the low-pressure side of the refrigeration system.

Furthermore, when system pressures are lower than the pressure in the refrigerant tank as stated in the question, then the refrigerant can be added to both the high and low pressure sides of the system.

Therefore, the correct option is true.