Answer:
D. beta particle
Explanation:
Number of protons increases from 38 to 39 indicating beta decay (only one proton up from parent isotope to daughter isotope) Also atomic mass (on top of an isotope), 90 stays the same as beta particle is very small.
In an ELISA, the compound 4-chloro-1-naphthol is used because:_______
a. it turns color in the presence of an enzyme that is bound to the secondary antibody
b. it helps the primary antibody bind to the protein
c. it helps the secondary antibody to bind to the protein
d. all of the choices
Answer:
a. It turns color in the presence of an enzyme that us bound to the secondary antibody.
Explanation:
The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.
The reaction responsible for producing the heat that maintains the temperature of your body is
Answers
A.
metabolism.
B.
catabolism.
C.
anabolism.
D.
photosynthesis.
Question
Answer:
A
Explanation:
it increase the rate of reaction when necessary
The chemical change that is responsible for producing the heat that maintains the temperature of your body is metabolism.
What is chemical change?
Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical changes,here:
https://brainly.com/question/23693316
#SPJ7
How many nitrate ions are present in the following aqueous solution?
5.08 L of a solution containing 2.68 x 1021 formula units of lithium nitrate per liter.
When you have the number, determine its log (base 10) and enter that value with 3 decimal places
Answer:
22.1
Explanation:
Step 1: Calculate the number of formula units of lithium nitrate
A 5.08 L solution contains 2.68 × 10²¹ formula units per liter.
5.08 L × 2.68 × 10²¹ formula units/1 L = 1.36 × 10²² formula units
Step 2: Calculate the number of nitrate ions
Lithium nitrate dissociates completely in water according to the following equation.
LiNO₃(aq) ⇒ Li⁺(aq) + NO₃⁻(aq)
The molar ratio of LiNO₃ to NO₃⁻ is 1:1. The number of nitrate ions is 1/1 × 1.36 × 10²² = 1.36 × 10²².
Then,
log (1.36 × 10²²) = 22.1
The number of nitrate ions are present in the following aqueous solution is 13.6x10²¹, and log(base 10) value of this is 22.2.
What are strong electrolytes?
Those salts which are completely dissociate into their ions in the solution form will known as strong electrolyte.
Lithium nitrate is a strong electrolyte and it shows complete dissociation as:
LiNO₃ → Li⁺ + NO₃⁻
Given that,
1 liter of solution containing = 2.68 x 10²¹ formula unit
5.08 L of solution containing = 5.08 x 2.68 x 10²¹ = 13.6x10²¹ formula unit
So, number of nitrate ion in given solution = 13.6x10²¹ formula unit
Log(13.6x10²¹) = 22.1
Hence, required values are 13.6x10²¹ and 22.1.
To know more about strong electrolytes, visit the below link:
https://brainly.com/question/5547666
A bond dissociation energy is A) The energy required to remove an electron from an atom. B) The energy released when an ionic compound dissociates in water. C) The energy required to break a covalent bond. D) The energy produced in a chemical reaction that breaks chemical bonds.
Answer:
The energy required to break a covalent bond
Explanation:
When a chemical bond is formed, energy is released. When a chemical bond is broken, energy is absorbed.
We define the bond dissociation energy as the energy required to break a covalent bond. The process of covalent bond cleavage is endothermic hence energy is absorbed for the process to occur.
A sample of helium gas at a pressure of 0.778 atm and a temperature of 20.2 °C, occupies a volume of 574 mL. If the gas is allowed to expand at constant temperature until its pressure is 0.373 atm, the volume of the gas sample will be mL.
Answer:
I don't know ❤️
81.5 g of metal was heated from 11 degrees Celsius to 69 degrees Celsius. If 6739 joules of heat energy were used, what is the specific heat capacity of the metal?
Answer:
the metal become red hot
Which process refers to the dissociation of Naci into Na+ and Ci+?
Answer:
dissolution is the process
Two hydrogen atoms interact to form a hydrogen molecule.
a. True
b. False
Answer:
a. True
Explanation:
An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.
Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.
A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.
Hydrogen is the simplest chemical element that exists. The symbol for the chemical element hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.
It is a chemical element found in group (1) of the periodic table and as such it has one (1) electron in its outermost shell. Thus, hydrogen has an atomic number of one (1) and a single valence electron because it has only one (1) proton and one (1) electron in its nucleus.
In Stoichiometry, two hydrogen atoms interact to form a hydrogen molecule, with each atom having a single electron in the 1S orbital. These hydrogen atoms react with each other due to the presence of a balanced attractive and repulsive force, which produces a strong covalent bond (H-H) in the hydrogen molecule.
Energy is released in the form of heat when the electrons in the orbitals of the two (2) hydrogen atoms form a covalent bond (H-H); thus, it's an exothermic chemical reaction.
Give me an atom with the following characteristics:
Lanthanide series
Boron
Chalogen
Alkaline Earth metal
Explanation:
Lanthanide series= E4
Boron=Si
Chalogen=O
Alkaline Earth metal =M9
When would exposure to a potentially harmful substance most likely to damage many organs in a developing embryo?
Suppose a 250.mL flask is filled with 1.7mol of H2 and 0.90mol of I2. The following reaction becomes possible:
+H2gI2g 2HIg
The equilibrium constant K for this reaction is 5.51 at the temperature of the flask.
Calculate the equilibrium molarity of I2. Round your answer to two decimal places.
Explanation:
here's the answer. I just plug the expression into my calculator and find the intercept to avoid the quadratic formula
Karl-Anthony is trying to plate gold onto his silver ring. He constructs an electrolytic cell using his ring as one of the electrodes. He runs this cell for 94.3 minutes at 205.3 mA. How many moles of electrons were transferred in this process
Answer:
0.012 moles of electrons were transferred
Explanation:
We can find the number of electrons transferred from the time in seconds and the current in Amperes using the equation:
n = I*t / F
Where n are moles of electrons transferred
I is current in Amperes = 0.2053A
t is time in seconds:
94.3min*(60s/1min) = 5658s
F is faraday constant 96485A*s/mol
Replacing:
n = 0.2053A*5658s / 96485A*s/mol
n = 0.012 moles of electrons were transferred
Moles are the mass per unit molar mass of compound. The number of moles of electrons that are transferred is 0.012 moles.
What is an electrolytic cell?An electrolytic cell is a type of electrochemical cell that uses electrical energy from external sources to conduct the chemical energy in a cell.
The moles transferred in electrolytic cells are measured as:
[tex]\rm n = \rm \dfrac{I\times t}{F}[/tex]
Given,
Current (I) in amperes = 0.2053 A
Time (t) in seconds = 5658 sec
Faraday constant (F) = 96485 A -s/mol
Substituting values in the equation above moles (n) can be calculated as:
[tex]\begin{aligned} \rm n &= \dfrac{ 0.2053 \times 5658 }{96485}\\\\&= 0.012 \;\rm mol\end{aligned}[/tex]
Therefore, 0.012 moles are transferred in this process.
Learn more about electrolytic cells here:
https://brainly.com/question/22514717
1. Metallic strontium crystallizes in a face-centered cubic lattice, with one Sr atom per lattice point. If the edge length of the unit cell is found to be 608 pm, what is the metallic radius of Sr in pm?
2. The substance beta manganese is found to crystallize in a cubic lattice, with an edge length of 630.0 pm. If the density of solid beta manganese is 7.297 g/cm3, how many Mn atoms are there per unit cell?
Answer:
[tex]r=215pm[/tex]
[tex]N_{Mn}=20[/tex]
Explanation:
From the question we are told that:
Edge length of the unit cell [tex]l=608pm[/tex]
a)
Generally the equation for The relationship between edge length and radius is mathematically given by
[tex]4r=\sqrt{2a}[/tex]
Therefore
[tex]4r=\sqrt{2*608}[/tex]
[tex]r=\frac{\sqrt{2*608}}{4}[/tex]
[tex]r=215pm[/tex]
b)
From the question we are told that:
Density [tex]\rho=7.297[/tex]
Edge length of [tex]l=630.0 pm=>630*10^-{10}[/tex]
Therefore Volume is given as
[tex]V=l^3[/tex]
[tex]V=630*10^-{10}^3[/tex]
[tex]V=2.50047*10^{−22}[/tex]
Generally the equation for Mass is mathematically given by
[tex]m=Volume*density[/tex]
[tex]m=V*\rho[/tex]
[tex]m=2.50047*10^{−22}*7.297[/tex]
[tex]m=1.83*10^{-21}g[/tex]
Therefore Molarity is given as
[tex]n=\frac{M}{Molar M}[/tex]
[tex]n=\frac{1.83*10^{-21}g}{55}[/tex]
[tex]n=3.32*10^{-23}[/tex]
Finally The atoms in a unit cell is
[tex]N_{Mn}=Moles*Avogadro\ constant[/tex]
[tex]N_{Mn}=3.32*10^{-23}*6.023*10^{23}[/tex]
[tex]N_{Mn}=20[/tex]
Based on the reaction below:
[tex]N_2 + 3H_2[/tex] ↔ [tex]2NH_3 + heat[/tex]
If we decrease the temperature, equilibrium will shift towards the...
Please explain!
N₂ + 3H₂ ⇄ 2NH₃ + heat
In the given equilibrium, we notice that the heat is on the right. which means that if the heat requirements don't meet, the reactants on the right will no longer react due to the lack of heat
but because the reactants on the left don't have such weaknesses, they will keep reacting hence producing more and more ammonia until a new equilibrium is reached
where there will be more ammonia and less nitrogen and hydrogen as compared to the equilibrium we had initially
Answer:
Explanation:
heat is given out as 1 of the products, along w/ NH3 in the forward reaction. so its an exothermic reaction
decreasing temperature favors exothermic reaction as more heat can be absorbed by the environment
so equilibrium will shift towards the products
Because the double bond in an alkene is rigid, alkenes can exist as geometric isomers. To clarify geometric isomers, IUPAC uses cis- and trans- as part of a compound name. If the substituents around the double bond are on the same side of the double bond, this is called
cis, cis.
cis.
cis, trans.
trans.
Answer:
cis
Explanation:
Cis isomers are formed when the substituents on the carbons of the double bond are on the same side of the double bond, forming a U. Trans isomers have substituents on opposite sides of the double bond, forming a sideways Z.
Hydrogengasand oxygengas react to form water vapor. Suppose you have of and of in a reactor. Calculate the largest amount of that could be produced. Round your answer to the nearest .
The question is incomplete. The complete question is :
Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .
Solution :
The balanced reaction for reaction is :
[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]
11.0 13.0
11/2 13/1 (dividing by the co-efficient)
6.5 mol 13 mol (minimum is limiting reagent as it is completely consumed during the reaction)
Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]
= 11.0 mol
If the Ksp of NaCl is experimentally determined to be 43.9, then what is the concentration of Na (in M) when it begins to crystallize out of solution
Answer:
6.63 M
Explanation:
NaCl(s) ---> Na^+(aq) + Cl^-(aq)
Given that [Na^+] = [Cl^-] = s
Where s= concentration of the both ions
Ksp = s^2
s= √Ksp
s= √43.9
s= 6.63 M
The concentration of Na (in M) obtained when it begins to crystallize out of solution is 6.63 M
What is solubility of product?The solubility of product (Ksp) is defined as the concentration of products raised to their coefficient coefficients. This is illustrated below:
mX <=> nY + eZ
Ksp = [Y]^n × [Z]^e
Dissociation equationNaCl(aq) → Na⁺(aq) + Cl¯(aq)
Let the concentration of Na⁺ be yLet the concentration of Cl¯ be yHow to determine the concentration of Na⁺ Solubility of product (Ksp) = 43.9Concentration of Cl¯ = yConcentration of Na⁺ = y =?Ksp = [Na⁺] × [Cl¯]
43.9 = y × y
43.9 = y²
Take the square root of both side
y = √43.9
y = 6.63 M
Thus, the concentration of Na⁺ is 6.63 M
Learn more about solubility of product:
https://brainly.com/question/4530083
The rate constant of an SN1 reaction depends on the nucleophile b. The rate constant of an SN2 reaction does not depend on the nucleophile c. SN1 reactions proceed via carbocation intermediates d. The SN2 mechanism does not involve an intermediate
Answer:
The rate constant of an SN1 reaction depends on the nucleophile
The rate constant of an SN2 reaction does not depend on the nucleophile
Explanation:
Let us recall that in an SN1 reaction, the rate determining step involves only the alkyl halide substrate and not the nucleophile. Hence;
Rate = k[RX]
Therefore;
k= Rate/[RX]
For an SN2 reaction, the rate determining step involves both the nucleophile and the alkyl halide substrate.
Hence;
Rate = k[Nu-] [RX]
k= Rate/[Nu-] [RX]
Note that;
[Nu-] = concentration of the nucleophile
[RX] =concentration of alkyl halide substrate
k= rate constant
We can see from the above derivations that;
1) The rate constant of an SN1 reaction does not depend on the nucleophile
2) The rate constant of an SN2 reaction depends on the nucleophile
If 650. grams of C6H12O6 (FW 180.16) reacts with 650. grams of O2 (FW 32.00) in cellular respiration: C6H12O6 6 O2 --> 6 CO2 6 H2O Which is the limiting reactant
Answer:
O2 is limiting reactant
Explanation:
To find the limiting reactant we need to convert the mass of each reactant to the moles using the formula weight. And, as 1 mole of C6H12O6 reacts with 6 moles of O2, we can know wich reactant will be over first (Limiting reactant) as follows:
Moles C6H12O6:
650g * (1mol/180.16g) = 3.608 moles C6H12O6
Moles O2:
650g * (1mol/32g) = 20.31 moles O2
Now, for a complete reaction of 3.608 moles of C6H12O6 are required:
3.608 moles C6H12O6 * (6mol O2 / 1mol C6H12O6) = 21.65 moles O2
As there are just 20.31 moles of O2,
O2 is limiting reactantWhat is the trend in electropositivity in group 1 elements?
Answer:
Electro positivity increases down the group
Consider the chemical reaction: N2 3H2 yields 2NH3. If the concentration of the reactant H2 was increased from 1.0 x 10-2 M to 2.5 x 10-1 M, calculate the reaction quotient (Q) and determine which way the chemical system would shift by comparing the value of Q to K.
In this equilibrium, the chemical system will shift to the right in order to produce more NH₃.
The equilibrium constant of a reaction is defined as:
"The ratio between equilibrium concentrations of products powered to their reaction quotient and equilibrium concentration of reactants powered to thier reaction quotient".
The reaction quotient, Q, has the same algebraic expressions but use the actual concentrations of reactants.
To solve this question we need this additional information:
For this reaction, K = 6.0x10⁻² and the initial concentrations of the reactants are:
[N₂] = 4.0M; [NH₃] = 1.0x10⁻⁴M and [H₂] = 1.0x10⁻²M
Thus, for the reaction:
N₂ + 3H₂ ⇄ 2NH₃
The equilibrium constant, K, of this reaction, is defined as:
[tex]K = \frac{[NH_3]^2}{[H_2]^3[N_2]}[/tex]
Where [] are concentrations in equilibrium.
And Q, is:
[tex]Q = \frac{[NH_3]^2}{[H_2]^3[N_2]}[/tex]
Where actual concentrations are:
[NH₃] = 1.0x10⁻⁴M
[N₂] = 4.0M
[H₂] = 2.5x10⁻¹M
Replacing:
Q = 1.6x10⁻⁷
As Q < K,
The chemical system will shift to the right in order to produce more NH₃
Learn more about chemical equililbrium in:
https://brainly.com/question/24301138
Two chemicals A and B are combined to form a chemical C. The rate, or velocity, of the reaction is proportional to the product of the instantaneous amounts of A and B not converted to chemical C. Initially, there are 100 grams of A and 50 grams of B, and for each gram of B, 2 grams of A is used. It is observed that 25 grams of C is formed in 9 minutes. How much is formed in 36 minutes
Answer:
In 36 minutes, 100 grams of Chemical C is formed.
Explanation:
Combination of chemicals A and B = chemical C
Chemical A available = 100 grams
Chemical B available = 50 grams
Proportion of A mixed with C = A2
Proportion of B mixed with C = B1
Therefore, Chemical C = A2 + B1
If 25 grams of C is formed in 9 minutes
In one minute 25/9 grams of C will be formed
Therefore, in 36 minutes, 25/9 * 36 = 100 grams
What particules make up the nucleus
Answer:
nucleus is a collection of particles called protons,which are positively charged..and neutrons which are electrically neutral..electrons which are negatively charged..and neutrons are in turn made up of particles called quarks ..
Explanation:
hope this helps u ...
Answer:
The Nucleus is made up of protons and neutrons.
What is the pH of a solution with an [H+] of (a) 5.4 x 10-10, (b) 4.3 x 10-5, (c) 5.4 x 10-7?
Answer:
a. 9.2
b. 4.4
c. 6.3
Explanation:
In order to calculate the pH of each solution, we will use the definition of pH.
pH = -log [H⁺]
(a) [H⁺] = 5.4 × 10⁻¹⁰ M
pH = -log [H⁺] = -log 5.4 × 10⁻¹⁰ = 9.2
Since pH > 7, the solution is basic.
(b) [H⁺] = 4.3 × 10⁻⁵ M
pH = -log [H⁺] = -log 4.3 × 10⁻⁵ = 4.4
Since pH < 7, the solution is acid.
(c) [H⁺] = 5.4 × 10⁻⁷ M
pH = -log [H⁺] = -log 5.4 × 10⁻⁷ = 6.3
Since pH < 7, the solution is acid.
CH3CH2OH
______ions
in an aqueous solution.
А
forms
B
does not form
Answer:
When ionic compounds dissolve, they break apart into ions which are then able to conduct a current ( conductivity ). ... Many molecular compounds, such as sugar or ethanol, are nonelectrolytes. When these compounds dissolve in water, they do not produce ions.
Explanation:
Ethanol is an organic compound with an alcoholic functional group and is nonelectrolytes. Ethanol (CH₃CH₂OH) does not form ions in an aqueous solution. Thus, option B is correct.
What are nonelectrolytes?Nonelectrolytes are substances that do not dissociate readily to yield ions and also are poor conductors of electricity and heat due to a lack of charged ions.
Ethanol is a nonelectrolyte that does not show conductivity and can be dissolved in water without producing ions. They cannot forms ions upon dissociation as covalent bonds are present.
Instead of ions that have covalent compounds that lack the ability to transfer the electron to conduct the electrical charge. Glucose, ethanol, etc. are some examples of a nonelectrolyte.
Therefore, option B. ethanol does not form ions is the correct blank.
Learn more about nonelectrolytes here:
https://brainly.com/question/14633704
#SPJ2
Predict whether solutions of each of the following salts will be acidic, basic, or neutral. Explain your reasoning for each by writing a balanced net ionic equation to describe the chemistry of each non-neutral salt in water:
a. NaCN
b. KNO3
c. NH4Cl
d. NaHCO3
e. Na3PO4.
Answer:
NaCN- basic salt
KNO3 - neutral salt
NH4Cl - acid salt
NaHCO3 - acid salt
Na3PO4 - acid salt
Explanation:
Salt hydrolysis a process by which salts react with water giving an acid and a base.
When we dissolve NaCN in water, we have;
NaCN + - ⇄ Na^+ + CN^-
KNO3 ------> K^+ + NO3^-
NH4Cl ------> NH4^+ + Cl^-
NaHCO3 -----> Na^+ + HCO3^-
Na3PO4 ----> 3Na^+ + PO4^3-
Note that if a salt is formed from a weak acid and a strong base, the salt will be a basic salt e.g NaCN formed from weak HCN and strong NaOH.
If a salt is formed from a strong acid and weak base, the salt will be acidic, e.gNH4Cl formed from weak NH3 and strong HCl.
If a salt is formed from a strong acid and strong base, the salt will be neutral, e.g KNO3 formed from strong KOH and strong HNO3.
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)
The equilibrium constant K₁ = Equilbrium constant K₂.
The equilibrium constant, K, of a reaction, is defined as:
"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".
For the reaction:
aA + bB ⇄ cC + dD
The equilibrium constant, K, is:
[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]
Now, assuming the reaction of the problem is 1:1:
A + B ⇄ C + D
[tex]K = \frac{[C][D]}{[A][B]}[/tex]
The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:
[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]
In the same way:
[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]
Thus, we can say:
K₁ = K₂Learn more about chemical equilibrium in:
https://brainly.com/question/4289021?referrer=searchResults
Place the following elements in order of decreasing atomic size: lead, phosphorus, oxygen, cesium, barium, and silicon.
Rank from largest to smallest. To rank items as equivalent, overlap them.
Cs, O, P, Si, Ba, Pb
Answer:
Cs> Ba> Pb>Si> P>O
Explanation:
Recall that atomic size decreases across a period and increases down the group.
As we move from Cs to Ba, the atomic size decreases across the period. Lead is larger than silicon since atomic size increases down the group.
Between phosphorus and oxygen, phosphorus is larger than oxygen as you move across the period.
Balance the following equations Ag (s) + H₂ S(g) + 0₂ (g) → Ag₂ S(₅) + H₂0
Answer:
2Ag(s) + 2H²S(g) + O2(g) ➡️ Ag2S(s) + 2H2O(g)
Explanation:
Sorry for my typo. but you understand
Considering a fish breeder decided to breed small fishes which needs a pH between 6,0 to 7,0 to stay alive. He needs to adjust the water's pH that is 5,0 to a value of 6.5, having available only calcium carbonate. The mass in mg added to 5L of water is about:
A)2,5
B)5,5
C)6,5
D)7,5
E)9,5