Answer:
Explanation:
When calcium hydroxide is dissolved in water , it ionizes as follows .
Ca( OH)₂ = Ca⁺² + 2 OH ⁻
When it is dissolved in water which contains minimal OH⁻ , so there is almost no common ion effect . Hence calcium hydroxide is fully dissolved in pure water solvent .
When 1.00 mole sample of solid calcium hydroxide is added to 500.0 mL of 0.500 M sodium hydroxide solution in beaker , it is not fully dissolved due to common ion of hydroxide ion ( OH⁻ )
NaOH = Na⁺ + OH⁻
OH⁻ ion from NaOH , suppresses the dissolution of calcium hydroxide .
Similarly
When A 1.00 mole sample of solid calcium hydroxide is added to 500.0 mL of 0.200 M sodium hydroxide solution in beaker , it is not fully dissolved due to common ion of hydroxide ion ( OH⁻ )
NaOH = Na⁺ + OH⁻
OH⁻ ion from NaOH , suppresses the dissolution of calcium hydroxide
When 1.00 mole sample of solid calcium hydroxide is added to 500.0 mL of 0.200 M calcium nitrate solution , it is not fully dissolved due to common ion of calcium ion ( Ca⁺² )
Ca( NO₃)₂ = Ca⁺² + 2NO₃⁻
Ca⁺² ion from Ca( NO₃)₂ , suppresses the dissolution of calcium hydroxide .
if you start with 4.3 moles of NH3, how many moles of NANH2 can be produced
Explanation:
Mole ratio of NH3 to NaNH2 = 2 : 2.
Moles of NaNH2 produced
= 4.3mol * (2/2) = 4.3mol.
3. What role did the government play in either supporting or suppressing African Americans'/Blacks'
civil rights?
A sample of quartz, which has a specific heat capacity of , is dropped into an insulated container containing of water at and a constant pressure of . The initial temperature of the quartz is . Assuming no heat is absorbed from or by the container, or the surroundings, calculate the equilibrium temperature of the water. Be sure your answer has the correct number of significant digits.
This question is incomplete, the complete question is;
A 17.0 g sample of quartz, which has a specific heat capacity of 0.730 J.g⁻¹°C⁻¹, is dropped into an insulated container containing 200.0 g of water at 85°C and a constant pressure of 1 atm . The initial temperature of the quartz is 7.2°C.
Assuming no heat is absorbed from or by the container, or the surroundings, calculate the equilibrium temperature of the water. Be sure your answer has the correct 3 number of significant digits.
Answer:
the equilibrium temperature of the water is 83.9°C
Explanation:
Given the data in the question;
Since no heat is absorbed from or by the container, or the surroundings;
Then Heat lost by the quartz = heat gained by water
ΔH1 = ΔH2
DH = mcΔT
where m is mass, C is specific heat capacity and ΔT is temperature change;
so
(mcΔT)1 = (mcΔT)2
we know that; specific heat capacity of is 4200 Joule/Kilogram K (J/kg∙K) = 4.2 (J/g∙°C)
we substitute
17.0g × 0.730 J.g⁻¹°C⁻¹ × ( 7.2°C - T2) = 200.0g × 4.2 J/g∙°C × ( T2 - 85°C)
89.352 - 12.41T2 = 840T2 - 71400
840T2 + 12.41T2 = 89.352 + 71400
852.41T2 = 71489.35
T2 = 71489.35 / 852.41 = 83.86°C ≈ 83.9°C
Therefore, the equilibrium temperature of the water is 83.9°C
Menstruation occurs on a ______ interval from puberty until menopause
A. Three months
B. Two months
C. Half month
D. One month
Sodium sulfate forms several hydrates. A sample of one of these hydrates is heated until all the water is removed. What is the formula of the original hydrate if it loses 43% of its mass when heated?
Answer:
Na₂SO₄•(H₂O)₆.
Explanation:
The mass that is lost when the sample is heated is water.
Let's assume we have 100 g of the hydrate:
43 grams would be water (H₂O), while the rest (100-43=57) would be sodium sulfate anhydrous (Na₂SO₄).
We convert both those masses to moles, using their respective molar masses:
H₂O ⇒ 43 g ÷ 18 g/mol = 2.39 molNa₂SO₄ ⇒ 57 g ÷ 142.04 g/mol = 0.40 molWe can write those results as (Na₂SO₄)₀.₄₀•(H₂O)₂.₃₉. Now we just need to multiply those numbers so that they become integers.
If we multiply both coefficients by 5 we're left with (Na₂SO₄)₂•(H₂O)₁₂.
Simplify and thus the final answer is Na₂SO₄•(H₂O)₆.
If 1 teaspoons of vinegar are equivalent in 60 drops. How many drops of vinegar are there in
1 ½ teaspoons?
Answer:
90 drops
Explanation:
1 teaspoon = 60 drops
Half a teaspoon = 60 ÷ 2 = 30 drops
1 and a half = 60 + 30 = 90
The graph below shows a reaction to which a catalyst has been added. How would the graph be different if it showed the same reaction without a catalyst?
A. The width of region 2 would be smaller.
B. The difference in the heights of regions 1 and 3 would be larger.
C. The height of region 2 would be larger
D. The distance between regions 1 and 3 would be smaller
Answer:
a. the width of region 2 would be smaller
If the same reaction was shown without a catalyst, the height of region 2 would be larger, so the correct option is (C).
What is catalyst?A catalyst is a substance that speeds up the rate of a chemical reaction without being consumed in the process. It works by providing an alternate pathway for the reaction with a lower activation energy, making it easier for the reactants to transform into products.
Catalysts can be solids, liquids, or gases, and they can be homogeneous or heterogeneous, depending on whether they are in the same phase as the reactants or in a different phase.
Catalysts are widely used in many industrial processes, such as the production of fertilizers, plastics, and fuels, to increase the efficiency and reduce the cost of the reaction. They can also be found in biological systems, where they play a crucial role in metabolic processes, such as the breakdown of food in the digestive system or the conversion of light into chemical energy in photosynthesis.
Learn more about catalyst, here:
https://brainly.com/question/15172505
#SPJ7
Which individual elements make up the following common
compounds?
CaCO 3
CaCl 2
C H O 3 6
HCl
Ca(OH) 2
Answer:
I think it will carbon hope it helps
The elements listed in the periodic table account
for only this percentage of the matter in
the universe.
Answer:
Only 4 %
Explanation:
Just about 4 percent of the known universe overall mass consists of atomic nuclei and is therefore described by chemical components. This proportion is around 15 percent of the total mass, with dark energy becoming the majority of the material .
How many grams of Kr are in 2.00 mol of Kr? (4)
Answer:
1 mole is equal to 1 moles Krypton, or 83.798 grams.
Explanation:
Starting in the mouth, food follows a pathway through the digestive system. Describe how the mouth is involved in both mechanical and chemical digestion. (At least one paragraph)
Answer:
The mouth uses both mechanical and chemical digestion. Mechanical digestion involves physically breaking down the food into smaller pieces (using the jaw/teeth). However, chemical digestion then takes over and starts breaking down the food into simpler nutrients that can be used by the cells using saliva, which is naturally made within the mouth.
Hope this helps you! Have a great day! :D
which type of electromagnetic radiation is used in security baggage scanners
X-rays, because
I did it and got it right
Answer:
XX-rayX-ray
Explanation:
Convert 77.2 grams of CH4 to molecules.
Answer:
сфоткай отправь. я не магу зделать
According to the concept of Avogadro's number, there are 29.056×10²³ molecules in 77.2 g of methane.
What is Avogadro's number?Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.
It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .
According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.
Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number
In the given example, number of moles=77.2/16=4.825 moles
If 1 mole has 6.023×10²³ molecules , then 4.825 moles will have 4.825×6.023×10²³ /1=29.056×10²³ molecules .
Thus, there are 29.056×10²³ molecules in 77.2 g of methane.
Learn more about Avogadro's number,here:
https://brainly.com/question/11907018
#SPJ2
Different substances require different amounts of heat to change their temperature by a given amount. This behavior of the materials is called the specific heat and is a characteristic of each material.
a. True
b. False
Answer: True
Explanation:
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
It is dependent on the type of material and is fixed for a particular type of material. For example: The specific heat capacity of iron material is fixed and the value is [tex]0.444J/g^0C[/tex]
Sam noticed on a climate map that most of the areas with high rainfall and a tropical climate were located in one region. Why are all the rainy, tropical areas found at a similar latitude? Describe the factors that influence the climate in this location.
Answer:
Okay here's the answer ↓
Step-by-step explanation:
Tropical climate is one of the five major climate groups in the Köppen climate classification. Tropical climates are characterized by monthly average temperatures of 18 ℃ (64.4 ℉) or higher year-round and feature hot temperatures. Annual precipitation is often abundant in tropical climates, and shows a seasonal rhythm to varying degrees. There are normally only two seasons in tropical climates, a wet season and a dry season. The annual temperature range in tropical climates is normally very small. Sunlight is intense because they are receiving direct sunlight.
Help solve please, it’s due in less than an hour or so.
sorry i can only figure out 1 but the answer is
------------------------------------------------------------------
124
hope you do good on your test :D
Which of the following will decrease the pressure of a gas in a closed container?
A. increasing the number of molecules
B. increasing the amount of light
C. increasing the temperature
D. increasing the volume
please answer asap thank you :))
Increasing the number of molecules will decrease the pressure of a gas in a closed container. Hence, option A is correct.
What is pressure?Pressure, in the physical sciences, the perpendicular force per unit area, or the stress at a point within a confined fluid.
An increase in the number of gas particles in the container increases the
frequency of collisions with the walls and therefore the pressure of the gas.
If the temperature decreases the pressure will also decrease.
Temperature is a measure of kinetic energy. When the temperature inside the container decreases the kinetic energy will also decrease.
Hence, option A is correct.
Learn more about the pressure here:
https://brainly.com/question/356585
#SPJ2
how is the massive star born
In a disproportionation reaction, the disproportionate substance
A. has exactly one oxidation state.
B. has exactly two oxidation states.
C. has at least three oxidation states.
D. has either one or two oxidation states.
Answer:
The answer is C: has at least three oxidation states.
Explanation:
you're welcome
Answer:
C
Explanation:
got it right on Edge
What would be the volume of mercury sample that has a mass of 52.757 g? The density of mercury is 12.5g / mL .
Answer:
Explanation:
Divide the mass by the density and the units of grams will cancel so youll end up with mL.
(52.757g)/(12.5g/mL) = 4.2mL
Help ASAP please
Which statement best describes the reaction pathway graph for an exothermic reaction but not an endothermic reaction?
It has a hill in the middle that is the highest point.
It has a valley in the middle that is its lowest point.
The reactants are higher in energy than the products.
The products are higher in energy than the reactants.
Answer: C ) The reactants are higher in energy than the products
Explanation:
The enthalpy that is a state variable that identifies the content of heat. Then the change of enthalpy for the exothermic reactions is negative, meaning that the energy of the products is lower than the energy of the reactants.
1. A chemical reaction where reactants exchange places in the product. *
(10 Points)
Synthesis
Decomposition
Replacement
Answer:
Replacement is your answer
Please help!!! It's Due TODAY!!! Imagine a made up polyatomic ion called tritoborate. Calcium tritoborate has the formula Ca2B3O8.
a. What is the formula for tritoborate? You must include the charge (both the sign and the
magnitude). (2 pts)
b. Write both the formula and the name for the compound formed when Fe3+ combines
with tritoborate? (2 pts)
Answer:
a. The formula for tritoborate ion is B₃O₈²⁻
b. The formula of the compound formed will be Fe₂(B₃O₈)₃ and the name will be Iron (iii) tritoborate
Explanation:
The formation of compounds by atoms of elements occurs in accordance with the valencies of the elements. Valency refers to the combining power of an element. For metallic elements, it is usually the number of electrons they can give up or lose while for non-metallic elements, it is the number of electrons they can accept. The valency of an atom of an element is related to its oxidation number. Metals have positive oxidation numbers while non-metals have negative oxidation numbers. Sometimes, two or more atoms combine together and react as a single unit and may carry a positive or negative charge. These are known as a radicals. For example, ammonium ion, NH₄⁺.
In the given question, calcium tritoborate, CaB₃O₈ is formed from the combination of calcium ion and tritoborate ion. Calcium ion carries the charge of +2, therefore, the tritoborate ion must have a charge of -2 in order to form a compound since the overal charge on a compound is zero.
a. let the tritoborate ion be represented by X
Ca = +2, X = ?
+2 + X = 0
X = -2
Thus, the formula for tritoborate ion is B₃O₈²⁻
b. When tritoborate ion combines with iron (iii) ion, Fe³⁺, two moles of Fe³⁺ will be required to react with three moles of B₃O₈²⁻ in order to have a neutral compound. The formula of the compound formed will be: Fe₂(B₃O₈)₃ and the name will be Iron (iii) tritoborate
If you eat food containing 1800 Calories per day, according to an advertisement
you will lose weight. A handbook says that a person uses 20,000 kJ per day, given normal waking and sleeping activities. Will the person lose weight if he or she eats food as suggested by the advertisement?
Answer:
No he or she will not lose weight
No, the person will not lose weight if they eat food containing 1800 Calories per day based on the given information.
To determine if a person will lose weight, we need to compare their calorie intake with their calorie expenditure. The advertisement suggests consuming 1800 Calories per day, which is equivalent to approximately 7536 kJ (1 Calorie = 4.184 kJ).
The handbook states that a person uses 20,000 kJ per day, which is their estimated calorie expenditure. If the person consumes 7536 kJ (1800 Calories) and expends 20,000 kJ per day, there is an energy imbalance. The person is consuming fewer calories than they are expending, resulting in a calorie deficit.
In this scenario, the person is likely to lose weight. To maintain their current weight, their calorie intake should match their calorie expenditure. However, since their calorie intake is lower than their expenditure, their body will need to rely on stored energy (fat reserves) to make up the difference. This can lead to weight loss over time.
It's important to note that weight loss is influenced by various factors, including individual metabolism, body composition, and overall health. Caloric intake should be balanced with proper nutrition and physical activity to support overall well-being. It's always advisable to consult a healthcare professional or registered dietitian for personalized guidance on weight management.
To learn more about Calories, here
https://brainly.com/question/22374134
#SPJ2
Draw the major organic product in the reaction scheme. Be sure to clearly show stereochemistry (if applicable).The starting material is an alkyne where carbon 1 is bonded to cyclopentane and carbon 2 is bonded to H. Step 1 is N a N H 2. Step 2 is C H 3 I. Step 3 is sodium in liquid ammonia.
Answer:
See explanation below
Explanation:
According to what you state in the problem, we have an ethyne bonded to a cyclopentane.
So, in the 1st step reacts with NaNH₂. In this step, the base which is very strong will substract the hydrogen from carbon 2, forming an anion in there. In the second step, this anion will react with CH₃I, and form a larger chain, the methyl group is attached to the alkyne.
Finally in the last step reacts with sodium in ammonia, this is to reduct the triple bond to just a single bond and leave an alkane only. The picture below shows these steps.
Hope this helps.
onsider the iodination of salicylamide by sodium iodide and sodium hypochlorite via an electrophilic aromatic substitution to form iodo-salicylamide. Reaction scheme illustrating the iodination of salicylamide by sodium iodide and sodium hypochlorite via an electrophilic aromatic substitution to form iodo-salicylamide. Calculate the molar masses of the reactants and product. Report molar masses to 1 decimal place.
Answer:
The answer is "[tex]\bold{263 \ and \ 137.1 \frac{g}{ mol}}[/tex]".
Explanation:
The chemical formula for Salicylamide: [tex]C_7H_7NO_2[/tex]
[tex]\to (12.011 \ \frac{g}{mol} \times 7)+(1.008 \ \frac{g}{mol} \times 7)+(14.0067 \frac{g}{mol} \times 1)+(15.999 \frac{g}{mol} \times 2) \\\\\to (84.077 \ \frac{g}{mol} )+(7.056 \ \frac{g}{mol} )+(14.0067 \frac{g}{mol})+(31.998 \frac{g}{mol} ) \\\\\to (84.077 \ \frac{g}{mol} )+(7.056 \ \frac{g}{mol} )+(14.0067 \frac{g}{mol})+(31.998 \frac{g}{mol} ) \\\\ =137.1377 \approx 137.1\ \frac{g}{mol}[/tex]
The chemical formula of Iodosalicylamide:[tex]C_7H_6INO_2[/tex]
[tex]\to (12.011\frac{g}{mol}\times 7)+(1.008\frac{g}{mol}\times 6)+(126.904\frac{g}{mol}\times 1)+(14.0067\frac{g}{mol}\times 1)+(15.999\frac{g}{mol}\times 2) \\\\\to (84.077\frac{g}{mol})+(6.048\frac{g}{mol})+(126.904\frac{g}{mol})+(14.0067\frac{g}{mol})+(31.998\frac{g}{mol}) \\\\=263.0337 \approx 263.0\ \frac{g}{mol}[/tex]
Which upgrade to a school will most likely reduce the school's consumption of
nonrenewable resources?
Answer: if they use solar collection panels
Explanation:
In the presence of an acid catalyst, cyclohexanol (100.16 g/mol) is dehydrated to give cyclohexene (82.14 g/mol) and water. Reaction scheme illustrating the dehydration of cyclohexanol in the prescence of acid catalyst to cylcohexene and water. A dehydration reaction starting with 4.1 g cyclohexanol produces 3.0 g cyclohexene. Calculate the percent yield for this reaction. Report your answer with two significant figures.
Answer:
88%
Explanation:
Step 1: Write the balanced equation
C₆H₁₁OH ⇒ C₆H₁₀ + H₂O
Step 2: Calculate the moles corresponding to 4.1 g of C₆H₁₁OH
The molar mass of C₆H₁₁OH is 100.16 g/mol.
4.1 g × 1 mol/100.16 g = 0.041 mol
Step 3: Calculate the theoretical yield, in moles, of C₆H₁₀
The molar ratio of C₆H₁₁OH to C₆H₁₀ is 1:1. The theoretical yield of C₆H₁₀, in moles, is 1/1 × 0.041 mol = 0.041 mol.
Step 4: Calculate the mass corresponding to 0.041 moles of C₆H₁₀
The molar mass of C₆H₁₀ is 82.14 g/mol.
0.041 mol × 82.14 g/mol = 3.4 g
Step 5: Calculate the percent yield of C₆H₁₀
We will use the following expression.
percent yield = experimental yield/theoretical yield × 100%
percent yield = 3.0 g/3.4 g × 100% = 88%
At STP, adding salt to a 200 mL sample of water produces a saturated 1.7 M solution. How many grams of salt (NaCl) must be added to 200 mL to produce this solution?
Answer:
[tex]m_{NaCl}=19.9gNaCl[/tex]
Explanation:
Hello!
In this case, since the formula for the calculation of molarity is:
[tex]M=\frac{n}{V}[/tex]
Whereas we can compute the moles of the solute as shown below, making sure the volume is in liters:
[tex]n=M*V[/tex]
Thus, by plugging in we obtain:
[tex]n=0.200L*1.70mol/L=0.170molNaCl[/tex]
Next, since the molar mass of NaCl is 58.44 g/mol, we obtain the following mass:
[tex]m_{NaCl}=0.170molNaCl*\frac{58.44gNaCl}{1molNaCl}\\\\m_{NaCl}=19.9gNaCl[/tex]
Best regards!
Atmospheric pressure decreases as altitude increases. In other words, there is more air pushing down on you at sea level, and there is less air pressure pushing down on you when you are on a mountain.
If hexane (C6H14C6H14), octane (C8H18C8H18), and octanol (C8H17OHC8H17OH) are heated evenly at different altitudes, rank them according to the order in which you would expect them to begin boiling.
A) Hexane at high altitude.B) Octane at high altitude.C) Octane at sea level.D) Octanol at sea level.
Answer:
Octanol at sea level> Octane at sea level > Octane at high altitude > Hexane at high altitude
Explanation:
Let us have it behind our minds that the boiling points of alkanes depends on the length of the alkyl chain. The longer the chain length, the higher the boiling point of the alkane.
Also, octanol has hydrogen bonding between its molecules in addition to dispersion forces, hence it has a higher boiling point than octane and hexane at sea level.
So, the order of boiling points required at the specified altitudes is;
Octanol at sea level> Octane at sea level > Octane at high altitude > Hexane at high altitude
