1. Imagine that you need to take a medicine that the doctor has prescribed for
you. Explain why scientists who developed that medicine would need to know
whether or not the compound in that medicine is polar. How might a polar
medicine behave differently as it dissolved in the body than a nonpolar medicine
would? Answer in 1 to 2 paragraphs. (10 points) Think about how polar and
nonpolar compounds might behave differently in the watery environment of your
stomach or bloodstream

1. Imagine That You Need To Take A Medicine That The Doctor Has Prescribed Foryou. Explain Why Scientists

Answers

Answer 1

Answer: Only non-polar medicines can diffuse across the membrane. non-polar drugs are lipid soluble, while polar drugs are water soluble, so polar drugs cant absorb through biological membranes.


Related Questions

PLEASE HURRY ILL GIVE 95 POINTS!
A student dissolved 5g of table salt in 100 mL of water in a beaker. When you compare the total mass of the salt and water before mixing to the mass of the solution after mixing, which is true?
A. The total mass of the solution after mixing, Will increase by a large amount
B. The total mass of the solution after mixing, Will increase by a small amount
C. The total mass of the solution after mixing will neither increase nor decrease
D. The total mass of the solution after mixing, Will decrease by a small amount

Answers

Answer:

B.

Explanation:

Answer:

B is the correct answer

Explanation:

If an oxygen molecule is moving at 4.78 x 104
cm.s-, what is its speed in mi hrl?
Show work please

Answers

Answer: 1075.5 mph

Explanation:anything moving at 4.78*10^4 cm/sec

equivalent to

cm —> miles = 1/1.6*10^5

sec —> hr = 1/3600

[4.78*10^4]*3600/1.6*10^5 = 1075.5 mph

It’s a simple question in Welding when you use a torch if you add a lot of oxygen to the fuel what happens does it burn faster or what I want to know

Answers

Answer:

Easy, the flame is smaller but burns hotter.

Explanation:

how is the massive star born

Answers

Stars form from cold molecular gas and dust when gravitational force overcomes the internal pressure in molecular clouds.

The density of copper is listed as 8.94 g/mL. Two students each make three density determinations through experimentation. Student A's measurements are 6.3 g/mL, 8.9 g/mL, and 11.1 g/mL. Student B's measurements are 8.3 g/mL, 8.2 g/mL, and 8.4 g/mL. Compare the two sets of results in terms of precision and accuracy.

Answers

Answer:A) After the values are added, we determine how many significant figures are involved by looking at the decimal places of the original values. 52.13 had only 2 digits past the decimal point so the answer can only contain 2 significant numbers after the decimal point which would be 53.88 g

Explanation:

Menstruation occurs on a ______ interval from puberty until menopause
A. Three months
B. Two months
C. Half month
D. One month ​

Answers

D. One Month Interval

The graph below shows a reaction to which a catalyst has been added. How would the graph be different if it showed the same reaction without a catalyst?

A. The width of region 2 would be smaller.

B. The difference in the heights of regions 1 and 3 would be larger.

C. The height of region 2 would be larger

D. The distance between regions 1 and 3 would be smaller​

Answers

Answer:

a. the width of region 2 would be smaller

If the same reaction was shown without a catalyst, the height of region 2 would be larger, so the correct option is (C).

What is catalyst?

A catalyst is a substance that speeds up the rate of a chemical reaction without being consumed in the process. It works by providing an alternate pathway for the reaction with a lower activation energy, making it easier for the reactants to transform into products.

Catalysts can be solids, liquids, or gases, and they can be homogeneous or heterogeneous, depending on whether they are in the same phase as the reactants or in a different phase.

Catalysts are widely used in many industrial processes, such as the production of fertilizers, plastics, and fuels, to increase the efficiency and reduce the cost of the reaction. They can also be found in biological systems, where they play a crucial role in metabolic processes, such as the breakdown of food in the digestive system or the conversion of light into chemical energy in photosynthesis.

Learn more about catalyst, here:

https://brainly.com/question/15172505

#SPJ7

alquien por favor que me ayude con ejercicios de química orgánica?​

Answers

dime cómo es el trabajo y veo si te puedo ayudar

3. What role did the government play in either supporting or suppressing African Americans'/Blacks'
civil rights?

Answers

slavery played a big role in this. the confederacy allowed slavery while the union was oppose to it.

The elements listed in the periodic table account
for only this percentage of the matter in
the universe.

Answers

Answer:

Only 4 %

Explanation:

Just about 4 percent of the known universe overall mass consists of atomic nuclei and is therefore described by chemical components. This proportion is around 15 percent of the total mass, with dark energy becoming the majority of the material .

Help solve please, it’s due in less than an hour or so.

Answers

sorry i can only figure out 1 but the answer is

------------------------------------------------------------------

124

hope you do good on your test :D

Starting in the mouth, food follows a pathway through the digestive system. Describe how the mouth is involved in both mechanical and chemical digestion. (At least one paragraph)

Answers

Answer:

The mouth uses both mechanical and chemical digestion. Mechanical digestion involves physically breaking down the food into smaller pieces (using the jaw/teeth). However, chemical digestion then takes over and starts breaking down the food into simpler nutrients that can be used by the cells using saliva, which is naturally made within the mouth.

Hope this helps you! Have a great day! :D

Sam noticed on a climate map that most of the areas with high rainfall and a tropical climate were located in one region. Why are all the rainy, tropical areas found at a similar latitude? Describe the factors that influence the climate in this location.

Answers

Answer:

Okay here's the answer ↓

Step-by-step explanation:

Tropical climate is one of the five major climate groups in the Köppen climate classification. Tropical climates are characterized by monthly average temperatures of 18 ℃ (64.4 ℉) or higher year-round and feature hot temperatures. Annual precipitation is often abundant in tropical climates, and shows a seasonal rhythm to varying degrees. There are normally only two seasons in tropical climates, a wet season and a dry season. The annual temperature range in tropical climates is normally very small. Sunlight is intense because they are receiving direct sunlight.

Which upgrade to a school will most likely reduce the school's consumption of
nonrenewable resources?

Answers

Answer: if they use solar collection panels

Explanation:

If 1 teaspoons of vinegar are equivalent in 60 drops. How many drops of vinegar are there in
1 ½ teaspoons?

Answers

Answer:

90 drops

Explanation:

1 teaspoon = 60 drops

Half a teaspoon = 60 ÷ 2 = 30 drops

1 and a half = 60 + 30 = 90

It’s 90 because if you half 60 it will become 30 60+30=90

An extraction procedure specifies that an aqueous solution containing dissolved organic material be extracted twice with 10 mL portions of diethyl ether. A student removes the lower layer after the first extraction and adds the second 10 mL portion of ether to the remaining upper layer. After shaking the separatory funnel, the student observes only one liquid phase with no interface. Explain.

Answers

Answer: The student observed only one liquid phase because The student removed the aqueous layer instead of the organic layer and then added organic solvent to more organic layer. Diethyl ether is less dense than water.

Explanation:

In organic chemistry, which is the chemistry of carbon atoms, liquid-liquid extraction techniques are used to separate solutes from its crude reaction mixtures. An example of liquid- liquid extraction technique used is the Separatory funnel.

The Separatory funnel extraction technique allows the separation of solutes based on their solubilities in two immiscible liquids. This appears as two phases or layers with the organic solvent on top while the aqueous solution is below the funnel. This is because the organic solvents are less dense than the aqueous solution.

From the question, the student had a dissolved organic compound in an aqueous solution and was given an organic solvent, diethyl ether for its extraction. When the first 10ml of ether was added, the dissolved organic compound mixed with it and remained in the top layer of the mixture. The student removes the lower layer after the first extraction and adds the second 10mL portion of ether to the upper layer remaining in the separatory funnel. After shaking the funnel, the student observes only one liquid phase with no interface because more organic solvent was added to the organic layer that remained after the aqueous layer was removed.

At STP, adding salt to a 200 mL sample of water produces a saturated 1.7 M solution. How many grams of salt (NaCl) must be added to 200 mL to produce this solution?

Answers

Answer:

[tex]m_{NaCl}=19.9gNaCl[/tex]

Explanation:

Hello!

In this case, since the formula for the calculation of molarity is:

[tex]M=\frac{n}{V}[/tex]

Whereas we can compute the moles of the solute as shown below, making sure the volume is in liters:

[tex]n=M*V[/tex]

Thus, by plugging in we obtain:

[tex]n=0.200L*1.70mol/L=0.170molNaCl[/tex]

Next, since the molar mass of NaCl is 58.44 g/mol, we obtain the following mass:

[tex]m_{NaCl}=0.170molNaCl*\frac{58.44gNaCl}{1molNaCl}\\\\m_{NaCl}=19.9gNaCl[/tex]

Best regards!

Predict whether each of the following ionic compounds is soluble in water: a.) LiCl d.) K2 ____________________ ____________________ b.) AgCl c.) BaCO3 ____________________ e.) Fe(NO3 ____________________ )3 ____________________ O

Answers

Answer:

See answer below

Explanation:

a.) Lithium Chloride, LiCl is soluble in water.

b.) Silver Chloride, AgCl is insoluble in water.

c.) Barium Carbonate, BaCO3 is insoluble in water.

d.)Potassium, K2 is soluble in water.

e.) Iron (III) Nitrate Fe(NO3)3 is soluble in water.

All nitrates (NO3) are soluble in water.Alkali metals are soluble in water.Chlorides are soluble in water with the exception of AgCl and a few others.Carbonates are generally insoluble in water.

What would be the volume of mercury sample that has a mass of 52.757 g? The density of mercury is 12.5g / mL .

Answers

Answer:

Explanation:

Divide the mass by the density and the units of grams will cancel so youll end up with mL.

(52.757g)/(12.5g/mL) = 4.2mL

Which individual elements make up the following common
compounds?
CaCO 3
CaCl 2
C H O 3 6
HCl
Ca(OH) 2

Answers

Answer:

I think it will carbon hope it helps

In the presence of an acid catalyst, cyclohexanol (100.16 g/mol) is dehydrated to give cyclohexene (82.14 g/mol) and water. Reaction scheme illustrating the dehydration of cyclohexanol in the prescence of acid catalyst to cylcohexene and water. A dehydration reaction starting with 4.1 g cyclohexanol produces 3.0 g cyclohexene. Calculate the percent yield for this reaction. Report your answer with two significant figures.

Answers

Answer:

88%

Explanation:

Step 1: Write the balanced equation

C₆H₁₁OH ⇒ C₆H₁₀ + H₂O

Step 2: Calculate the moles corresponding to 4.1 g of C₆H₁₁OH

The molar mass of C₆H₁₁OH is 100.16 g/mol.

4.1 g × 1 mol/100.16 g = 0.041 mol

Step 3: Calculate the theoretical yield, in moles, of C₆H₁₀

The molar ratio of C₆H₁₁OH to C₆H₁₀ is 1:1. The theoretical yield of C₆H₁₀, in moles, is 1/1 × 0.041 mol = 0.041 mol.

Step 4: Calculate the mass corresponding to 0.041 moles of C₆H₁₀

The molar mass of C₆H₁₀ is 82.14 g/mol.

0.041 mol × 82.14 g/mol = 3.4 g

Step 5: Calculate the percent yield of C₆H₁₀

We will use the following expression.

percent yield = experimental yield/theoretical yield × 100%

percent yield = 3.0 g/3.4 g × 100% = 88%

A species is
O the least specific group
O not a group at all
o the most specific group
the largest group

Answers

Not a group at all I believe unless there is another definition for species :)

Convert 77.2 grams of CH4 to molecules.

Answers

Answer:

сфоткай отправь. я не магу зделать

According to the concept of Avogadro's number, there are 29.056×10²³ molecules in 77.2 g of methane.

What is Avogadro's number?

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number

In the given example, number of moles=77.2/16=4.825 moles

If 1 mole has 6.023×10²³ molecules , then 4.825 moles will have 4.825×6.023×10²³ /1=29.056×10²³ molecules .

Thus, there are 29.056×10²³ molecules in 77.2 g of methane.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ2

As human populations grow, it becomes more important to use renewable sources of energy Which of the following objects uses energy from a renewable source?
a stove that is powered by natural gas
a refrigerator that runs on solar power
a lantern that burns oil from beneath Earth's surface
a foaster that uses electricity from a coal-burning power plant

Answers

Explanation:

Moreover, increasing use of fossil fuels also causes serious environmental problems. Hence, there is a pressing need to use renewable energy sources like solar energy, wind, tide, biomass and energy from waste material. (i) it reduces the dependence on fossil fuels for energy. (ii) they donot produces pollution.

A sample equal to the atomic mass of an element in grams contains ________ atoms. This amount of matter is called _________ .

Answers

Explanation:

The mole (abbreviated mol) is the SI measure of quantity of a “chemical entity,” such as atoms, electrons, or protons. It is defined as the amount of a substance that contains as many particles as there are atoms in 12 grams of pure carbon-12.

Hope this Helped :)

Write the molecular equation for the reaction that occurs, if any, when solutions of the following substances are mixed: nitric acid and potassium carbonate. Make sure that you have properly identified all of the phases in your answer.

Answers

Answer:

The balanced molecular equation for the reaction is:

[tex]2HNO_{3_{(aq)} }[/tex] + [tex]K_{2} CO_{3} _{(s)}[/tex] → [tex]2KNO_{3} _{(s)}[/tex] + [tex]H_{2} O_{(l)[/tex] + [tex]CO_{2} _{(g)}[/tex]↑

Explanation:

The weak nitric acid reacts with the strong potassium base to produce salt, water and carbon dioxide which is given off.

Molecular ratio of reactants is 2 : 1.

All phases are represented in the equation: aq for aqueous, l for liquid and g for gas (notice how they are written in subscript).

I hope this was helpful.

A student wants to know if the weight of a cart affects its speed at the bottom of a ramp. He can change the weight of the cart by adding different numbers of balls, and he can change the height of the ramp by using different numbers of blocks. Which set of tests should he compare? MARKING BRAINLIEST

Answers

Answer:d

Explanation:

Please help asap!!

A cooling curve has two flat lines, or plateaus. What does the plateau at the higher temperature represent?

Select one:

a. Increase in temperature of a liquid

b. Decrease in temperature of a gas

c. Condensation of a gas

d. Freezing of a liquid

Answers

I’ll say C









hdhdhehehrhehshhehehrhfhfhf

A cooling curve has two flat lines, or plateaus. The plateau at the higher temperature represents condensation of a gas and the correct option is option C.

What is Cooling curve?

When a solid substance is heated until it is completely melted, and then heated further and allowed to cool slowly, the curve obtained by plotting temperature against time is known as the cooling curve.

The gradient of the cooling curve is related to the heat capacity, the thermal conductivity of the substance, and the external temperature. The more heat is required to change the temperature of the substance, the slower it cools, so the smaller the gradient of the curve. The higher the thermal conductivity, the faster heat is transferred, so the faster the substance cools.

Therefore, A cooling curve has two flat lines, or plateaus. The plateau at the higher temperature represents condensation of a gas and the correct option is option C.

Learn more about Cooling curves, here:

https://brainly.com/question/30463836

#SPJ2

Sodium sulfate forms several hydrates. A sample of one of these hydrates is heated until all the water is removed. What is the formula of the original hydrate if it loses 43% of its mass when heated?

Answers

Answer:

Na₂SO₄•(H₂O)₆.

Explanation:

The mass that is lost when the sample is heated is water.

Let's assume we have 100 g of the hydrate:

43 grams would be water (H₂O), while the rest (100-43=57) would be sodium sulfate anhydrous (Na₂SO₄).

We convert both those masses to moles, using their respective molar masses:

H₂O ⇒ 43 g ÷ 18 g/mol = 2.39 molNa₂SO₄ ⇒ 57 g ÷ 142.04 g/mol = 0.40 mol

We can write those results as (Na₂SO₄)₀.₄₀•(H₂O)₂.₃₉. Now we just need to multiply those numbers so that they become integers.

If we multiply both coefficients by 5 we're left with (Na₂SO₄)₂•(H₂O)₁₂.

Simplify and thus the final answer is Na₂SO₄•(H₂O)₆.

What is the mass in grams of 2.21 mole of Ca3(PO4)4?

Answers

Answer:

1105.29 grams

Explanation:

If you calculate the molar mass of Ca3(PO4)4 you'll get 500.13. Molar mass is the mass of one mole of a substance. Multiply 500.1194 by 2.21 because we have 2.21 moles to get 1105.264 grams.

The molar mass of Ca is 40.078 grams, and there are 3 of them. So 40.078 x 3 is 120.234 grams.

The molar mass of P is 30.974 and there are 4 P's, so 30.974 x 4 is 123.896 grams.

The molar mass of O is 16 grams and there are 6 of them. Again, 16 x 16 is 256 grams.

Add up 120.234 + 123.896 + 256 to get the molar mass of Ca3(PO4)4, 500.13.

Other Questions
How many layers of molecules are in the plasma membrane?A.1B.2C.3D.4 a box of oil paints contains 9 cans, each can is the same weight. if the box weighs 20.25 pounds, how much does each can weigh? and how many pounds if there were only 6 cans? From left to right, what goes in each compartment of a three-compartment sink?O A. water and sanitizer, detergent and water, clean wateroB. clean water, detergent and water, water and sanitizerO C. detergent and water, clean water, water and sanitizeroD. detergent and water, water and sanitizer, clean water 5. If the ratio of boys to girls in a student's class is 5 to 7, what fraction of the class is boys?What fraction is girls? _______metamorphism is when metamorphism occurs near magma._______metamorphism usually results from plates colliding. ______metamorphism creates the most metamorphic rock. The radius of a circle is 10 feet. What is the angle measure of an arc bounding a sector with area 15 square feet? Please Help 15 points and brainliest for best answer thank you it's on the picture provided You work at an insurance agency. Your boss has asked you to purchase eight computer screens for the office. You are considering two online stores. The first store charges $629.99 total for the screens and offers free shipping. The second store charges $579.49 total for the same screens, and charges $39.99 for shipping all eight screens. Additionally, you have an online code for a $20 discount at the first store. What is the final cost for the store that offers the better deal? PLease Help!!ALgebra 2 WIll be giving extra points What was the American revolution?Who, what, where, when, why? simplify 15 divided by 3 + 2 x 10 What best describes how the monster feels at the beginning of the story? powerful, victorious, strong and empowered tired, worn, listless and resigned energetic, ambitious, excited and curious furious, vengeful, tormented and despised Tom has a collection of 13 snakes, 4 of which are purple and 5 of which are happy. He observes thatall of his happy snakes can add,none of his purple snakes can subtract, andall of his snakes that can't subtract also can't add.Which of these conclusions can be drawn about Tom's snakes?A)Purple snakes can add.B) Purple snakes are happy.C) Snakes that can add are purple.D) Happy snakes are not purple.E) Happy snakes can't subtract. what is not a required characteristic of a well-written melody amanda placed a small television on a metal rolling cart. on her way to the library, her friend carlos stepped in front of the cart. although amanda stopped suddenly, the television stayed in place on the cart. what kept the television on the cart when she stopped suddenly? Logan went shopping for a new phone. Sales tax where he lives is 3%. What number should he multiply the price of the phone by to find the total plus tax in one step? Which is the largest organ?sartoriusskinhairgluteus maximusScience. The gluteus is the butt muscles What is institutional racism? Please provide one example that was stated by the book in either business, education or government. Which two climates have very low levels of precipitation A dry and polarB polar and highlandsC highlands and temperate marine D temperature marine and temperature continental Nettle Co. uses process costing to account for the production of rubber balls. Direct materials are added at the beginning of the process and conversion costs are incurred uniformly throughout the process. Equivalent units have been calculated to be 12,000 units for materials and 10,000 units for conversion costs. Beginning inventory consisted of $14,000 in materials and $8,000 in conversion costs. April costs were $72,000 for materials and $80,000 for conversion costs. Ending inventory still in process was 4,000 units (100% complete for materials, 50% for conversion). The cost per unit for materials using the FIFO method would be closest to:__________A. $6.0000B. $7.1666C. $14.5000D. $1.8334